README.TXT

                  Windows 95 Driver for Zoltrix Modem
                  -----------------------------------

This README.TXT file contain the latest information about the Windows
95 driver for Zoltrix Modem.

A. Driver content

\ Root directory
   336ACF.INF      - 33600bps Modem driver INF file {Win95/NT4.0}
   ROCKWAVE.INF    - 33600bps Modem Serial Wave driver INF file {Win95/NT4.0}
   ZOL56K.INF      - K56 Modem driver INF file {Win95/NT4.0}
   WAV56K.INF      - K56 Modem Serial Wave driver INF file {Win95/NT4.0}
   README.TXT      - This file (You are reading it now)
   V90.EXE         - ITU V.90 Update Wizard for Zoltrix 56K Modem

\230k\             - Directory containing the 230400bps driver for K56 modem.
   ZOL56K.INF      - K56 Modem driver INF file {Win95/NT4.0}
   WAV56K.INF      - K56 Modem Serial Wave driver INF file {Win95/NT4.0}
   ROCKSER.VXD     - K56 High Speed serial driver (handles 230,400 bps DTE rate)
   SERIAL.VXD      - K56 High Speed serial driver (handles 230,400 bps DTE rate)
   230K.TXT        - Latest information and installation procedure for the 230k driver.

\at_com\
   1048R4.PDF      - Generic AT Command set.
                     It require Acrobat Reader 3.0 or above to open.
                     You can obtain the Acrobat Reader from
                        http://www.adobe.com


B. Windows 95 Modem Driver Installation Instructions

If you have Internet access, you can obtain more detailed instructions
and latest driver at the following address:

http://www.zoltrix.com/wn95drv.htm

Quick Instructions-

1.  Double click on "Modems" in the Control Panel
2.  Click on the "ADD" button
3.  Click on the box located next to "Don't detect my modem, I will select
    it from a list"
4.  Click on the "Next" button
5.  Click on the "Have Disk" button
6.  Insert the diskette containing the driver into Drive A:
7.  Click on the "OK" button
8.  Highlight the correct model by clicking on it
9.  Click on the "Next" button
10. Highlight the correct port that you modem is set to.
11. Click on the "Next" button
12. The Wave device for Voice modems should now be detected. 
    Select the driver from the driver diskette if prompted. 
13. You will be instructed that the modem has been setup successfully.
14. Click on the "Finish" button
15. Click on the "Close" button


C. V.90 Update for K56Flex modems only

If your ISP has not upgraded to V.90 you should not update the modems
FLASH ROM to the new V.90 code. You should still run this program to
update your modem to the latest K56Flex version that has the ability to
recognize if your ISP has upgraded to V.90 automatically.

To upgrade the modem, run the V90.EXE program found on this driver disk
and follow the directions.


                          WARRANTY DISCLAIMER
                          ===================

ZOLTRIX PROVIDES THIS WINDOWS 95 DRIVER SET "AS IS" AND WITHOUT ANY
WARRANTY. TO THE EXTENT PERMITTED UNDER APPLICABLE LAW, ZOLTRIX
DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. SPECIFICALLY, ZOLTRIX MAKES NO REPRESENTATION OR WARRANTY THAT
THE DRIVER SET IS FIT FOR ANY PARTICULAR PURPOSE.

ZOLTRIX SHALL NOT BE LIABLE FOR ANY DAMAGES RESULTING FROM THE USE OF
THIS DRIVER, INCLUDING BUT NOT LIMITED TO, LOSS OF PROFIT, DATA OR USE
OF THE SOFTWARE, OR INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES OR OTHER SIMILAR CLAIMS, EVEN IF ZOLTRIX HAS BEEN SPECIFICALLY
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

FURTHER, ZOLTRIX RESERVES THE RIGHT TO REVISE THIS DRIVER SET AND TO MAKE
CHANGES TO IT FROM TIME TO TIME WITHOUT OBLIGATION TO NOTIFY ANY PERSONS
OR ORGANIZATION OF SUCH REVISION OR CHANGE.