Toaletka_EN.pdf

burda Download

Instructions – Toiletries bag 142

Bag, 28 x 20 cm (11" x 8")

Stitch the narrow edges of the

side/bottom piece to the narrow

edges of the top piece, catching

piping in each seam. Fold allow-

ances and piping tapes down and

topstitch side/bottom piece close

to seams.

Materials:

Terry cloth fabric and oilcloth,

pieces each 80 x 45 cm (32" x 18").

Piping: 3.20 m (3 1 ⁄ 2 yds).

1 zipper, 40 cm (16") long.

Satin ribbons in 2 colors, 15 mm

( 5 ⁄ 8 ") wide: each 0.15 m (6").

Mark centers on upper and

lower edges of each bag piece

and mark center top and center

bottom on top/side/bottom unit.

Slightly round off corners of

each bag piece. Baste piping

around edges of each bag piece,

beginning and ending at center

of lower edge and turning pip-

ing ends under, toward allow-

ance. Open zipper. Stitch edges

of top/side/bottom unit to bag

pieces, matching center points

as marked. Fold allowances and

piping tapes toward top/side/

bottom unit. Topstitch top/side/

bottom close to seams. Turn bag

right side out.

Seam allowances:

1 cm ( 3 ⁄ 8 ") on all seams and edges.

edge of each top piece so that

the piping cord lies toward the

center of the piece, directly next

to the seam line. Use the zipper

foot to stitch directly next to the

piping cord. Fold seam allow-

ances and piping tape to wrong

side. Baste the piping edges of

the two top pieces to the zipper

so that the zipper teeth are

covered. Topstitch close to pip-

ing attachment seams and 7 mm

( 1 ⁄ 4 ") from piping attachment

seams, catching the zipper tapes.

Cutting:

Terry cloth and oilcloth:

2 bag pieces, each 28 cm (11")

long and 20 cm (8") wide,

1 side/bottom piece, 52 cm (20 1 ⁄ 2 ")

long and 12 cm (4 3 ⁄ 4 ") wide,

2 top pieces, each 40 cm (16")

long and 6 cm (2 3 ⁄ 8 ") wide.

Lay each terry cloth piece on

corresponding oilcloth piece,

wrong sides facing. Baste edges

together. Treat each basted unit

as a single layer of fabric.

Cut one of the ribbon pieces

in half. Lay each half in a loop.

Baste the loops to the top unit,

at the ends of the zipper.

Run remaining piece of satin

ribbon through hole in zipper

pull. Knot ends of ribbon to-

gether.

Baste piping along one long

All models, pattern pieces, and illustrations are copyrighted. Commercial use is prohibited.

The publishers cannot be held responsible for damages due to improper use of the pattern or materials,

improper carrying-out of instructions or tips, or improper use of finished models.

Sewing:

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: