110 Manual.pdf

(485 KB) Pobierz
Microsoft Word - ATV_manual.doc
110cc Four Stroke ATV
User Manual
Prepared by: Adventure Imports New Zealand
www.adventureimports.co.nz
Thanks for purchasing the ATV from us!
Notes:
1) The exhaust pipe on the right foot side could be hot after a long
time riding, be careful.
2) While use remote start, the ATV may start to move after start up,
if the idle speed is not set properly, be careful.
3) This manual is prepared based on the information provided by the
manufacturer, if any content in this manual is not appropriate,
please consult a qualified mechanic or auto electrician.
1.0 FEATURES OF THIS MODEL
· Proven LONCIN engine.
· Four stroke engine for smooth power and reliability.
· Easy electric start.
· Maximum speed can be restricted for beginners.
· The ATV is equipped with an alarm system. The engine can be shut
down remotely for adult supervision.
· To ensure a child’s safety, a parent can walk behind the ATV,
holding a cord attached to the cutout at the back of the quad. A
quick tug on the cord will cutout the engine
· The ATV has a kill switch on the handle bar.
· The size and weight make this model easy for a child to handle
and easy to load into a family car.
· The knobby tires, good suspensions and the strong engine will
ensure that riding this little bike be a lot of fun.
· The low cost, sturdy design and nice look make this model an
instant hit with children.
· The size of the 110cc engine will always excite your rider as
they progress from a beginner to an expert, from tiny to
confident youth.
· One brake stops this little quad – no confusion for the little
ones.
2.0 SAFETY PRECAUTIONS
Safety is extremely important when allowing young children to ride a
motor bike. Children of the same age can have different levels of skill
and coordination, so only a parent can understand their child’s
capabilities. If a parent decides to allow a child to ride a motorized
vehicle, it is essential that they realize that the child’s safety
rests entirely on their hands. The child must NEVER be unsupervised.
The quad’s speed must be set to match the child’s capability at all
times. The parent is the only person responsible for the child’s safety.
By allowing the child to ride a quad, the parent accepts that this is
his sole responsibility and risk.
The governor on the quad should be set to allow the child to travel
only at a walking pace while learning to ride. The area in which the
child is allowed to ride must be free of obstacles that could be a
danger to the child and free of people and animals that could be
injured. As the child’s capability increases, the quad’s speed can
gradually be increased but always only to a safe level.
Please read and apply all the safety information in this manual.
Remember: you are responsible for your own safety and the safety of
those in your care. Adventure imports cannot be held liable for
accidents, no matter what the cause. You are responsible for checking
your vehicle thoroughly for faults and for riding safely.
Operating any motorized vehicle carries an element of risk. By choosing
to ride this vehicle, you have accepted this risk. Adventure imports is
not responsible for negligence, speeding, component failure,
inexperience or other unforeseen circumstances that can cause injury or
death.
_
To help you ride and operate the quad safely, here is some advice to
increase your safety awareness.
· Ride under the instruction of a competent teacher until you are
an experienced rider.
· These vehicles are designed and manufactured for off-road use
only. It is illegal and unsafe to use this machine on any public
street, road or highway, paved, tarred or cement surfaces
· Check local riding laws and regulations before operating this
machine.
· Check local environmental laws.
· Riding an ATV is serious; it can be hazardous to operate. A
collision or rollover can occur quickly, often with serious
consequences. Even in routine maneuvers such as turning, riding
over obstacles and on sloping ground or across water, mud or
loose surfaces, the quad handles differently from other vehicles.
· Never carry passengers, as this alters the handling
characteristics dangerously.
· Never exceed the recommended load capacity. Overloading or
improper loading can cause mechanical failure, loss of control
and unnecessary danger.
· Always keep both hands and both feet securely on the ATV.
· Never attempt stunts, jumps, wheelies or other tricks.
· Never ride faster than your skill or conditions permit.
· Never ride when tired or after consuming alcohol or drugs or
while experiencing any dangerous medical condition.
· Inspect your ATV each time you use it to make sure there are no
mechanical faults or problems with tires, brakes or controls.
Your ATV must be in safe operating condition at all times, with
sufficient oil, gas, and brake fluid and tire pressure.
· Never use your ATV in flowing water or in water deeper than 5
inches.
· Always use the recommended tire pressure to reduce the risk of
tire failure.
· Always turn the engine OFF when refueling.
· Don’t run the engine in an enclosed area —THIS CAN BE FATAL.
· Always wear an approved helmet that fits snugly as well as eye
protection, gloves, a long sleeved jacket and long pants.
· Engine oil from a recently run motor can be very hot. When
draining oil for an oil change, be careful.
· Be sure to replace fuses with ONLY the correct ones; using an
incorrect fuse can cause a fire.
· Never put your feet on the ground when the vehicle is starting
off or moving.
· It is your responsibility to ensure that the ATV is properly and
safely ridden and maintained.
· People should not operate an ATV beyond their physical or mental
limits or capabilities.
· While you are learning to ride, use an ATV only on level, open
ground away from people.
· If you allow an untrained person to use the ATV, you are
endangering his/her life and the lives of others.
· Check that the ATV throttle and throttle cables are free and
working. A jammed throttle can cause an expensive and injurious
accident.
· In some other countries ATVs with 110cc or smaller engines cannot
be driven by those aged 6 and under. Recommend that riders under
age 16 should ride only with adult supervision and only after
training.
· All riders should take a course of safety instruction.
· Never use gasoline (petrol) to clean the ATV. A slight spark
could cause a fatal explosion. Keep a fire extinguisher nearby
when working on the ATV.
· Excessive “play” or slippage on a drive chain can cause the chain
to break which could, in turn, cause a serious accident.
“Grabbing,” shuddering or lack of braking ability could mean
there is a serious brake problem. This must be fixed before
riding or serious injury could result.
· The high-tension wire from the CDI unit to the sparkplug
generates extremely high voltage and can cause a serious or fatal
shock if touched with the power on.
· Don’t touch any part of the engine, exhaust pipe until it has
cooled down.
· Don’t siphon toxic liquids such as fuel or brake fluid by mouth
or allow them to remain on your skin.
· Wipe up IMMEDIATELY any oil or grease that could cause you to
slip or lose control of the ATV.
· Don’t allow animals or children to be around an unattended ATV.
· Keep loose clothing and long hair well out of the way of moving
parts.
· Remember: MANY PEOPLE HAVE LOST FINGERS OR LIMBS that were pulled
into moving parts, especially chains. DO NOT WORK ON THE ATV WITH
THE ENGINE RUNNING.
·
If, despite all these precautions, you are injured, seek medical
attention immediately.
3.0 TEACHING TECHNIQUES
Your student’s safety depends on your commitment to take the time
necessary to fully educate him/her on the proper operation of the ATV.
Remember that proper instruction before your student begins to ride is
just as important as proper instruction and supervision while riding.
Following is a step-by-step guide to help make your student’s first use
of the ATV safe and enjoyable. Before you go through the steps, however,
be sure you have reviewed the vehicle features. Be sure to take breaks
as the student becomes tired or his/her attention starts to wander.
Full attention at all times is needed to safely operate any motorized
vehicle.
STEP 1: PROPER CLOTHING & PROTECTIVE GEAR
The first step to safe riding is proper protection of the rider. Your
student should always wear a helmet, eye protection, gloves, long pants,
a long-sleeved shirt or jacket and boots. Make sure your student is not
wearing any loose-fitting clothes. Loose belts, scarves, etc can get
caught in moving parts and cause personal injury. Even in hot weather,
make sure the student wears long pants and a long-sleeved shirt. These
not only protect against abrasive injuries but also help reduce fatigue
which comes from loss of body heat caused by exposure to the wind.
STEP 2: FAMILIARIZATION WITH THE VEHICLE
Your student should become completely familiar with the names and
functions of all controls. Demonstrate operation of the controls if
necessary. Ask the student to do such things as “Apply the brakes. Turn
off the engine,” etc. Practice this exercise until the student can
operate all of the controls without hesitation.
STEP 3: STARTING OFF AND STOPPING
To help your student develop confidence, she/he should PRACTICE FIRST
WITH THE ENGINE OFF, as follows:
· Have student sit on ATV.
· Instruct student to keep his/her eyes straight ahead while you
slowly push the vehicle from behind. This will give the student
the “feel” of riding a moving vehicle.
· As you push the ATV, instruct your student to steer straight
ahead and perform operations such as stopping the vehicle. Watch
your student closely to make sure she/he is operating the
controls correctly and without looking at them.
· As you approach the end of the practice area, tell your student
to stop the vehicle.
· You should drag the rear end of the ATV around so you can push it
straight ahead in the opposite direction.
·
Practice with the engine OFF until your student gets the “feel”
of using the brakes and can stop the vehicle and turn OFF the
engine switch without hesitation and without looking at the
controls.
Zgłoś jeśli naruszono regulamin