Mstar Solution-Firmware update and burning
Operation Instruction
Version: A/4
Content
1、 Description 3
1.1. Function 3
2、 Prepare SD card 3
2.1. Rename 4
2.2. Format SD card 4
2.3. Copy the update files 4
3、 Process of updating and burning firmware from SD card 5
4、 Update LOGO sepretely. 6
5、 Radar ditector 6
6、 Notes 6
1, Description
1.1 Function
Adopt to Mstar solution firmware update
2, Prepare the SD card
2.1 Rename
Please prepare one empty SD card. Rename the Removable Disk, delete the name and press enter! (still named in Removable Disk) then format the SD card.
Picture1 Rename Picture 2 After Enter, named in Removable Disk
Note：Do not change the disk name, eg. Named Removable Disk to XiaoMing’s Disk. Please delete the name and press Enter. The system will rename in Removable Disk.
2.2, Format the SD card
Requirements: 2GB（≤2GB），Must use the FAT16（FAT）file system format
Picture3. 4 FAT16（FAT）file system format
2.3, Copy the update firmware
a) Open the SD card, copy the UPD file to SD card first. Then set the UPD file to only for read. Note: please make sure the UPD file is the first file to be in SD card.
Picture5 UPD file copy to SD card first
b) UPD、IPL2501、CONF.msd、EBOOT.nbO、M_xip.bin(or S_ xip.bin/L_ xip.bin)、LOGO.BMP、APP etc., total 7 files to the SD card.：
Picrure6 Other files copy to SD card
3, Progress update or burn the firmware from SD card
3.1 Insert the SD card to the device or burning tool before power on. Power on the device, press power on key 3 seconds, the system will update the firmware automatically. Please connect to the charger during updating（not USB cable）
Picture7 Updating image
Then picture 8 come out
Picture 8 Copy the APP to NAND FLASH
After copy, the system inform to take out the SD card, and reset the device. Please press Reset key. （If after reset, device does not power on automatically, please press POWER key） Update successful.
Picture 9 Inform update successful. Please take out of SD card and Reset
Note：1.Must take out SD card before Reset
2. If in burning tool, no need take out SD card, must disconnect power supply and replace the flash. Then repeat the 5st step.
Device reset, system initialize. After screen calibration, firmware update finish. (Burning tool no need this progress)
4, Update LOGO separately
If the customer want to change the LOGO( opening image), progress as following:
4.1 Only put LOGO file in SD card.
4.2 Reset device to enter update statue. After 5s, reset the device, then customer can see the updated LOGO
4.3 LOGO file request:
a) BMP format
b) 4.3 inch resolution is 480*272（HD 5 inch resolution is 800*480）；
c) File name must be LOGO；
d) Must be 16 degree color picture, or 15 degree.
5, Notes
5.1 After preparing the SD card, other files in the SD card can not influent the update.
5.2 If do not want the SD card is effective updating SD card, just need to rename the UPD file to XUPD
5.3 While update the device, must connect to charger, but not USB cable
5.4 If not success, please repeat the update progress again.
3
markman52