CruiserSuiteSE_TestPointBox_UserGuide.pdf

(1313 KB) Pobierz
221267150 UNPDF
Cruiser Suite TestPoint Box (UC-20)
User’s Guide
221267150.005.png
Cruiser Suite TestPoint Box (UC-20) – User’s Guide – Contents
Contents
Introduction
3
Connecting the TestPoint Box
4
Connecting the power supply
5
Using the TestPoint Box
7
Appendix - TestPoint Box variants
9
Appendix - TestPoint Box connector setup
10
221267150.006.png
Cruiser Suite TestPoint Box (UC-20) – User’s Guide – Introduction
Introduction
Cruiser Suite SE TestPoint Box consists of:
the box body (with 3 female connectors)
USB cable (type A -> type B)
data cable (8pin RJ-45 -> SonyEricsson data conector)
• power supply clip “PLUS” (always RED)
• power supply clip “GROUND” (optional)
• TestPoint needle
TestPoint cabling, contains three (optionally only two) wires:
3
221267150.007.png
Cruiser Suite TestPoint Box (UC-20) – User’s Guide – Connecting the TestPoint Box
Connecting the TestPoint Box
We recommend to keep the following the procedure, almost for novices:
1. Disconnect the UC-20 cable from the USB
2. Connect data-cable and testpoint cable to the UC-20 box
3. Connect power supply clips to the phone battery pins
4. Connect data-cable to the phone
5. Check to polarity according to the original battery placement
6. Connect the USB cable to the UC-20 box
4
(see chapter: Connecting the power supply)
(see chapter: Connecting the power supply)
221267150.008.png 221267150.001.png 221267150.002.png
Cruiser Suite TestPoint Box (UC-20) – User’s Guide – Connecting the power supply
Connecting the power supply
Very important is not to reverse the power supply polarity.
Some phones do have the plus and minus battery pins interchanged, i.e. they are on the
opposite side as the most of phones.
Reversing the polarity will most probably cause a physical damage to either the phone or
the UC20 cable. So please take higher care when connecting the power supply clips and we
strongly recommend to compare the clips setup to the original battery placement, before
connecting the UC20 second side to the computer’s USB.
Illustration - Confronting the power supply polarity
Fig.: Common polarity coniguration - DB2012 and lot of DB2020
continued
5
221267150.003.png 221267150.004.png
Zgłoś jeśli naruszono regulamin