9000FRU.pdf

(5087 KB) Pobierz
9000FRUFinal
FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra
9000 Series
GENERAL INFORMATION
Tools Required for Proper
Disassembly and Reassembly:
1. Phillips Screwdriver (Size 0&1)
2. Flat head Screwdriver
3. Security Torx (Size 7)
4. Case Separator
5. ESD Wrist Strap
6. ESD mats
7. Tweezers
Before attempting any of the following procedures,
make sure that the main battery and AC adaptor is
not connected to the unit and the environment in
which you are working on is protected from
Electro-Static Discharge(ESD).
TOSHIBA
Tough Enough for Today’s World.
TM
49472348.051.png 49472348.062.png 49472348.073.png 49472348.083.png 49472348.001.png 49472348.002.png 49472348.003.png 49472348.004.png 49472348.005.png 49472348.006.png 49472348.007.png 49472348.008.png 49472348.009.png 49472348.010.png 49472348.011.png 49472348.012.png 49472348.013.png 49472348.014.png 49472348.015.png 49472348.016.png 49472348.017.png 49472348.018.png 49472348.019.png 49472348.020.png 49472348.021.png 49472348.022.png 49472348.023.png 49472348.024.png 49472348.025.png 49472348.026.png 49472348.027.png 49472348.028.png 49472348.029.png 49472348.030.png 49472348.031.png 49472348.032.png 49472348.033.png 49472348.034.png 49472348.035.png 49472348.036.png 49472348.037.png 49472348.038.png 49472348.039.png 49472348.040.png 49472348.041.png 49472348.042.png 49472348.043.png 49472348.044.png 49472348.045.png 49472348.046.png 49472348.047.png 49472348.048.png 49472348.049.png 49472348.050.png 49472348.052.png 49472348.053.png 49472348.054.png 49472348.055.png 49472348.056.png 49472348.057.png 49472348.058.png 49472348.059.png 49472348.060.png 49472348.061.png 49472348.063.png 49472348.064.png 49472348.065.png 49472348.066.png 49472348.067.png 49472348.068.png 49472348.069.png 49472348.070.png 49472348.071.png 49472348.072.png
FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra
9000 Series
TOSHIBA
Tough Enough for Today’s World.
TM
49472348.074.png 49472348.075.png
FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra
TM
9000 Series
BATTERY PACK REMOVAL
OPTIONAL PC CARD REMOVAL
Release
lever
Battery
Pack
PC card
Eject button
1. Turn the computer upside down as shown.
2. Slide the battery release lever in the direction of the
arrow.
3. Lift out the battery .
1. Press the eject button for the PC card you want to
remove.
2. Press the extended eject button to pop the PC Card
out.
3. Grasp the PC card and remove it.
NOTE : Before removing any PC Card device, make sure
it is “STOPPED” in the PC Card manager.
SELECT BAY REMOVAL
CD-R/W/DVD-ROM DRIVE DISASSEMBLY
CD-R/W/DVD-ROM
drive
Base cover
Connector
M2x3 silver
screws
Release lever
Select bay
device
M2x8 silver
screws
Connector cover
1. Turn the computer upside down.
2. Slide the release lever in the direction of the arrow.
3. Pull out the select bay device in the direction of the
arrow.
1. Remove five M2x3 silver screws securing the base
cover and lift off the base cover .
2. Remove two M2x8 silver screws securing the
connector cover.
3. Remove the connector and the connector cover
from the CD- R/W/DVD-ROMdrive.
TOSHIBA
Tough Enough for Today’s World.
49472348.076.png 49472348.077.png
FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra
TM
9000 Series
MEMORY MODULE REMOVAL
M2.5x2.8
silver flat
head screws
Memory cover
Memory clips
1. Turn the computer upside down.
2. Remove two M2.5x2.8 silver flat head screws
and remove the memory cover .
3. Spread the memory clips outward and pull the
memory module out of the connector on a
45 degree angle.
BLUETOOTH CARD REMOVAL
Bluetooth cover
M2x4 black security torx screw
Plastic insulator
Bluetooth card
Coaxial cable
1. Remove one M2x4 black security torx screw securing
the bluetooth cover.
2. Lift out the bluetooth cover .
3. Disconnect the coaxial cable from the bluetooth card.
4. Lift up the plastic insulator to disconnect the card.
TOSHIBA
Tough Enough for Today’s World.
49472348.078.png 49472348.079.png
FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra
TM
9000 Series
HDD REMOVAL
HDD REMOVAL
M2.5x8 silver screw
HDD cover
Plastic Tab
HDD pack
1. Turn the computer upside down.
2. Remove one M2.5x8 silver screw securing HDD cover.
3. Remove the HDD cover .
4. Unfold the plastic tab and pull to remove the HDD
from the bay.
KEYBOARD REMOVAL
HDD
bracket
HDD
HDD connector
M3x4 flat head brass screws
M2.5x16 silver screw
5. Remove four M3x4 brass flat head screws securing
the HDD to the bracket and lift the drive out of the
bracket .
6. Unplug the HDD connector from the drive.
1. Turn the computer upside down.
2. Remove one M2.5x16 silver screw securing the
keyboard on the bottom cover.
TOSHIBA
Tough Enough for Today’s World.
49472348.080.png 49472348.081.png 49472348.082.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin