031_Premium_aut_platform_catalogue.pdf

(17615 KB) Pobierz
1 - Premium automation platform
Contents
1
<< Back
1
Schneider Electric
1/1
809955461.479.png 809955461.490.png 809955461.500.png 809955461.511.png 809955461.001.png 809955461.012.png
 
Selection guide
Premium automation platform
1
Processors and coprocessors
Applications
Single network modular PLCs with PL7 Junior/Pro development software
1
Number of racks
4/6/8 solts
4
16
12 solts
2
8
Discrete I/O
In-rack
512 (1) , remote Bus X
1024 (1) , remote Bus X
V2 AS-i bus (2)
838 max.
1736 max.
Fieldbus (3)
2048 max.
4032 max.
6080/8672 max. (4)
Preventa modules
Emergency stop monitoring and limit switches
Analogue I/O
Max. no. of channels
24 in-rack (1)
24 in-rack (1)
640 on Fipio
80 in-rack (1)
640 on Fipio
80 in-rack (1)
640 on Fipio
In-rack type
Inputs: high level 1 (with common point or isolated), 12...16 bits; inputs: isolated, 16 bits; inputs:
App-spec. channels
Maximum no.
8 (1)
24 (1)
Type
Counter
40 kHz, 500 kHz and 1 MHz counter (with SSI absolute encoder)
Motion
Motion control for servomotors (500 kHz with incremental encoder, 200 kHz with SSI absolute encoder),
Weighing
Module with measurement input for 8 sensors maximum, 2 discrete outputs and 1 RS 485 output for
Communication
Communication module, 2 channels with 1 isolated RS 485 integrated channel (with Uni-Telway,
Network connections
Maximum no.
1
With integrated Ethernet
–
yes
Type
Fipway, Modbus Plus, Ethernet TCP/IP, Ethernet TCP/IP with or
without integrated Web server
Bus connections
Uni-Telway
Integrated
Integrated
AS-i
2 max.
4 max.
Fipio manager
–
yes
depending on
model
yes
Fipio Agent
1
1
Third-party : CANopen,
InterBus-S, Profibus-DP
–
1
Process control
Nomber of channels
10
Loop profile
Per channel : 3 single, process, cascade, secondary,
Memory capacity
Integrated RAM
32 Kwords
48 Kwords
64 Kwords (model with Fipio integrated link)
Extension
64 Kwords
160 Kwords
Data storage
128 Kwords
128…2688 Kwords with memory extension
Symbol storage
–
128 Kwords with memory extension
Power supply
Modules ? 100…240 V (26/50/85 W), A 24 V non isolated (30/50 W), A 24…48 V isolated (50 W).
Type of processors
TSX P57 103M
TSX P57 153M
TSX P57 2 L 3M
(5)
TSX P57 2 L 23M
(6)
Pages
1/19
(1) Cumulative maximum values. (2) Sensor/actuator bus. (3) Fipio/Modbus Plus/InterBus-S/Profibus DP fieldbus.
(4) The first value corresponds to processor without Fipio integrated link, the second value with processeur Fipio integrated link,.
(5) To replace L by 0 : model without Fipio integrated, 5 : model with Fipio integrated.
1/2
Schneider Electric
809955461.031.png 809955461.042.png 809955461.053.png 809955461.064.png 809955461.073.png 809955461.084.png 809955461.095.png 809955461.106.png 809955461.117.png 809955461.128.png 809955461.139.png 809955461.150.png 809955461.161.png 809955461.172.png 809955461.183.png 809955461.194.png 809955461.205.png 809955461.216.png 809955461.227.png 809955461.238.png 809955461.249.png 809955461.260.png 809955461.271.png 809955461.282.png 809955461.293.png 809955461.304.png 809955461.315.png 809955461.326.png 809955461.337.png 809955461.348.png 809955461.359.png 809955461.370.png 809955461.381.png 809955461.392.png 809955461.403.png 809955461.414.png 809955461.425.png 809955461.436.png 809955461.447.png 809955461.458.png 809955461.469.png 809955461.473.png 809955461.474.png 809955461.475.png 809955461.476.png 809955461.477.png 809955461.478.png 809955461.480.png 809955461.481.png 809955461.482.png 809955461.483.png 809955461.484.png 809955461.485.png 809955461.486.png 809955461.487.png 809955461.488.png 809955461.489.png 809955461.491.png
 
1
Multinetwork modular PLCs with PL7 Junior/Pro development software
PLC coprocessors to be integrated in PC
compatible
1
16
8
1024 (1) , remote Bus X
2048 (1) , remote Bus X
1024 (1) , remote Bus X
3472 max.
3472 max.
1736 max.
3472 max.
10 112/12 704 max. (4)
10 112 max.
14 114 max.
6080 max.
12 704 max.
128 in-rack (1)
640 on Fipio
128 in-rack (1)
256 in-rack (1)
1472 on Fipio
80 in-rack (1)
640 on Fipio
128 in-rack (1)
640 on Fipio
thermocouple, 16 bits; outputs: isolated, 11 bits + sign; outputs: with common point, 13 bits + sign
32 (1)
64 (1)
24 (1)
32 (1)
motion control for stepper motor
display (one module is counted as 2 application-specific channels)
Modbus/Jbus or character mode protocol) and 1 PCMCIA card slot (multiprotocol serial link, Jnet network)
3
4
1
3
–
yes
–
yes
–
Fipway, Modbus Plus, Ethernet TCP/IP with or without embedded Web server
Integrated
Integrated
Integrated
8 max.max.
8 max.
4 max.
8 max.
Depending on model
–
1
–
1
1
1
1
2 (with only 1 CANopen)
2 (with only 1 CANopen)
1
2 (with only 1
CANopen)
15
20
10
15
setpoint programmer
64/80 Kwords (7)
80/96 Kwords (7)
(model with Fipio
integrated)
64/80 Kwords (7)
96/176 Kwords (7)
48 Kwords
80/96 Kwords (7)
384 Kwords
512 Kwords
160 Kwords
384 Kwords
128…2688 Kwords with memory extension
128 ou 640 Kwords with memory extension
128 Kwords with memory extension
128 ou 256 Kwords with memory extension
128 Kwords with memory extension
Each rack requires a power supply
TSX P57 3 L 3M
(5)
TSX P57 3623M
TSX P57 453M
TSX P57 4823M
T PCX 57 203M
T PCX 57 353M
1/23
(6) To replace L by 6 : model without Fipio integrated, 8 : model with Fipio integrated..
(7)The second value corresponds to the capacity of the integrated when the application program is supported by the extension memory.
Schneider Electric
1/3
809955461.492.png 809955461.493.png 809955461.494.png 809955461.495.png 809955461.496.png 809955461.497.png 809955461.498.png 809955461.499.png 809955461.501.png 809955461.502.png 809955461.503.png 809955461.504.png 809955461.505.png 809955461.506.png 809955461.507.png 809955461.508.png 809955461.509.png 809955461.510.png 809955461.512.png 809955461.513.png 809955461.514.png 809955461.515.png 809955461.516.png 809955461.517.png 809955461.518.png 809955461.519.png 809955461.520.png 809955461.521.png 809955461.002.png 809955461.003.png 809955461.004.png 809955461.005.png 809955461.006.png 809955461.007.png 809955461.008.png 809955461.009.png 809955461.010.png 809955461.011.png 809955461.013.png 809955461.014.png 809955461.015.png 809955461.016.png 809955461.017.png 809955461.018.png 809955461.019.png 809955461.020.png 809955461.021.png 809955461.022.png 809955461.023.png 809955461.024.png 809955461.025.png
 
Presentation,
description
Premium automation platform
1
Racks and fan modules
Presentation
1
TSX RKY LLL racks form the basic elements of the Premium control system platform.
These racks provide the following functions:
@ Mechanical function: they enable all the modules of a PLC station (power supply,
processor, discrete I/O, analogue I/O, application-specific modules) to be fitted.
@ Electrical function: they enable connection to the bus (Bus X) and provide
distribution of:
R power supplies required for each module in the same rack,
R data and service signals for the entire PLC station where this has several racks.
To meet user requirements, several types of rack are available in order to make up
PLC stations comprising 1 to 16 racks maximum distributed over Bus X with a
maximum cumulative length of 100 meters.
TSX FAN LLP fan modules installed above the racks of Premium PLCs provide
forced air convection, in order to maintain an even ambient temperature inside the
enclosure and to eliminate the various hot spots that may exist.
Fan modules are required whenever the ambient temperature is between 60 °C and
70 °C (forced ventilation enables the ambient temperature in the enclosure to be
lowered by 10 °C) (1) .
Three types of fan module are available: A 24 V, ? 110 V and ? 220 V.
According to the modularity of the racks used, one fan module is required for a 4 or
6 position rack, two fan modules for an 8-position rack and three fan modules for a
12 position rack.
(1) For an ambient temperature between 25 °C and 60 °C, the use of fan modules increases the
MTBF.
Description
TSX RKY LLL racks comprise:
TSX FAN LL P
1 Metal frame.
2 Slots for anchoring the module pins.
3 48-way female 1/2 DIN connectors for module-rack connections (the first
connector is reserved for the power supply module).
4 Locating slot for the power supply module.
5 Tapped holes for fixing the module.
6 Four holes for fixing the rack.
7 Position for rack address label.
8 Position for station network address label.
9 Two earth terminals for earthing the rack.
10 Microswitches for coding the rack address (on extendable racks).
11 Two 9-way female SUB-D connectors for the remote connection of bus X to
another rack (on extendable racks).
1
10
5
9
8
11
3
11
7
6
4
2
TSX FAN LLP fan modules comprise:
1
Connection terminal for the fan module power supply, the internal temperature
probe and the associated LED or preactuator.
3
3
4
1
2
2
Earth terminal.
3
Two fixing holes for the fan module.
4
Shuttered air outlets.
Functions:
page 1/5
References:
page 1/6
Dimensions:
page 1/7
1/4
Schneider Electric
 
809955461.026.png 809955461.027.png 809955461.028.png 809955461.029.png 809955461.030.png 809955461.032.png 809955461.033.png 809955461.034.png 809955461.035.png 809955461.036.png 809955461.037.png 809955461.038.png 809955461.039.png 809955461.040.png 809955461.041.png 809955461.043.png 809955461.044.png 809955461.045.png 809955461.046.png 809955461.047.png 809955461.048.png 809955461.049.png 809955461.050.png 809955461.051.png 809955461.052.png 809955461.054.png 809955461.055.png 809955461.056.png 809955461.057.png 809955461.058.png 809955461.059.png 809955461.060.png 809955461.061.png 809955461.062.png 809955461.063.png 809955461.065.png
 
Functions
Premium automation platform
1
Racks and fan modules
Composition of a PLC station
1
2
1
Using TSX RKY 6/8/12 standard racks, it is possible to constitute a PLC station with
Premium processors, with just a single rack.
Using 1 TSK RKY 4EX/6EX/8EX/12EX (1) extendable racks, a PLC station can be
constituted which comprises up to:
@ 4 racks for a station with TSX 57-10 processor,
@ 16 racks for a station with TSX 57-20, 57-30, 57-40 or PCX 57-20/30 processor.
The racks are connected to each other by Bus X extension cables 2 .
4
5
3
Bus X
The racks distributed on Bus X are connected to each other via Bus X extension
cables whose total length is 100 m maximum. Using TSX REY 200 Bus X remote
modules enables the length of Bus X to be increased to a maximum of 2 x 350 m
(see page 1/8).
The racks are connected to each other using TSX CBY LL0K Bus X extension cables
which are connected to one of the two 9-way SUB-D connectors on each extendable
rack. The incoming cable from another rack can be connected to either the right 4 or
left-hand 3 connector.
Line terminations
The two extendable racks located at the ends of the line must have a TSX TLY EX
line terminator 5 fitted on the unused 9-way SUB-D type connector, except when
using PCX 57 coprocessors where the line terminator is supplied with the
coprocessor module.
Address rack n (with power supply standard format)
“less-significant” “most-significant”
Addressing the racks
P S
0 0
0 1
0 2
0 3
0 4
P S
0 8
0 9
1 0
1 1
1 2
Address 0: this address is always assigned to the rack which holds the processor.
This rack can be located in any position on the line.
Addresses 1 to 7: these can be assigned in any order to all the other extendable
racks of the station.
As the two racks with 4,6, or 8 slots which make up each pair can have the same
address on the bus X, position numbers are defined as follows:
Rack n “less-significant”: position 00 to xx (02, 04 or 06); rack n “most-significant”:
position 08 to yy (10, 12 or 14).
@ Each rack with 12 slots holds an address (with position 00 to 10).
Installing the various modules on the standard or extendable rack with address 0
The rack with address 0 must contain a power supply module and the processor
module. For Premium PLCs which have two types of power supply (standard or
double format), the position of the processor (standard or double format) will depend
on the type of power supply used.
P S
0 0
0 1
0 2
0 3
0 4
0 5
0 6
Using a standard format power supply module:
@ The power supply module systematically occupies position PS .
@ The processor module must be installed in position 00/01 ( 00 with
TSX P57 1L3M processor).
@ The other modules are installed from position 02 ( 01 with TSX P57 1L3M
processor).
P S
0 0
0 1
0 2
0 3
0 4
0 5
0 6
Using a double format power supply module:
@ The power supply module systematically occupies positions PS and 00 .
@ The processor module must be installed in position 01/02 ( 01 with TSX P57 1L3M
processor).
@ The other modules are installed from position 03 ( 02 with TSX P57 1L3M
processor).
Installing the various modules on extendable racks with addresses 1 to 7
Each rack must have either a standard format or double format power supply module.
Using a standard format power supply module:
@ The power supply module systematically occupies position PS .
@ The other modules are installed from position 00 onwards.
Using a double format power supply module:
@ The power supply module systematically occupies positions PS and 00 .
@ The other modules are installed from position 01 onwards.
P S
0 0
0 1
0 2
0 3
0 4
0 5
0 6
PS
00
01
02
03
04
05
06
Presentation:
page 1/4
References:
page 1/6
Dimensions:
page 1/7
Schneider Electric
1/5
 
809955461.066.png 809955461.067.png 809955461.068.png 809955461.069.png 809955461.070.png 809955461.071.png 809955461.072.png 809955461.074.png 809955461.075.png 809955461.076.png 809955461.077.png 809955461.078.png 809955461.079.png 809955461.080.png 809955461.081.png 809955461.082.png 809955461.083.png 809955461.085.png 809955461.086.png 809955461.087.png 809955461.088.png 809955461.089.png 809955461.090.png 809955461.091.png 809955461.092.png 809955461.093.png 809955461.094.png 809955461.096.png 809955461.097.png 809955461.098.png 809955461.099.png 809955461.100.png 809955461.101.png 809955461.102.png 809955461.103.png 809955461.104.png 809955461.105.png 809955461.107.png 809955461.108.png 809955461.109.png 809955461.110.png 809955461.111.png 809955461.112.png 809955461.113.png 809955461.114.png 809955461.115.png 809955461.116.png 809955461.118.png 809955461.119.png 809955461.120.png 809955461.121.png 809955461.122.png 809955461.123.png 809955461.124.png 809955461.125.png 809955461.126.png 809955461.127.png 809955461.129.png 809955461.130.png 809955461.131.png 809955461.132.png 809955461.133.png 809955461.134.png 809955461.135.png 809955461.136.png 809955461.137.png 809955461.138.png 809955461.140.png 809955461.141.png 809955461.142.png 809955461.143.png 809955461.144.png 809955461.145.png 809955461.146.png 809955461.147.png 809955461.148.png 809955461.149.png 809955461.151.png 809955461.152.png 809955461.153.png 809955461.154.png 809955461.155.png 809955461.156.png 809955461.157.png 809955461.158.png 809955461.159.png 809955461.160.png 809955461.162.png 809955461.163.png 809955461.164.png 809955461.165.png 809955461.166.png 809955461.167.png 809955461.168.png 809955461.169.png 809955461.170.png 809955461.171.png 809955461.173.png 809955461.174.png 809955461.175.png 809955461.176.png 809955461.177.png 809955461.178.png 809955461.179.png 809955461.180.png 809955461.181.png 809955461.182.png 809955461.184.png 809955461.185.png 809955461.186.png 809955461.187.png 809955461.188.png 809955461.189.png 809955461.190.png 809955461.191.png 809955461.192.png 809955461.193.png 809955461.195.png 809955461.196.png 809955461.197.png 809955461.198.png 809955461.199.png 809955461.200.png 809955461.201.png 809955461.202.png 809955461.203.png 809955461.204.png 809955461.206.png 809955461.207.png 809955461.208.png 809955461.209.png 809955461.210.png 809955461.211.png 809955461.212.png 809955461.213.png 809955461.214.png 809955461.215.png 809955461.217.png 809955461.218.png 809955461.219.png 809955461.220.png 809955461.221.png 809955461.222.png 809955461.223.png 809955461.224.png 809955461.225.png 809955461.226.png 809955461.228.png 809955461.229.png 809955461.230.png 809955461.231.png 809955461.232.png 809955461.233.png 809955461.234.png 809955461.235.png 809955461.236.png 809955461.237.png 809955461.239.png 809955461.240.png 809955461.241.png 809955461.242.png 809955461.243.png 809955461.244.png 809955461.245.png 809955461.246.png 809955461.247.png 809955461.248.png 809955461.250.png 809955461.251.png 809955461.252.png 809955461.253.png 809955461.254.png 809955461.255.png 809955461.256.png 809955461.257.png 809955461.258.png 809955461.259.png 809955461.261.png 809955461.262.png 809955461.263.png 809955461.264.png 809955461.265.png 809955461.266.png 809955461.267.png 809955461.268.png 809955461.269.png 809955461.270.png 809955461.272.png 809955461.273.png 809955461.274.png 809955461.275.png 809955461.276.png 809955461.277.png 809955461.278.png 809955461.279.png 809955461.280.png 809955461.281.png 809955461.283.png 809955461.284.png 809955461.285.png 809955461.286.png 809955461.287.png 809955461.288.png 809955461.289.png 809955461.290.png 809955461.291.png 809955461.292.png 809955461.294.png 809955461.295.png 809955461.296.png 809955461.297.png 809955461.298.png 809955461.299.png 809955461.300.png 809955461.301.png 809955461.302.png 809955461.303.png 809955461.305.png 809955461.306.png 809955461.307.png 809955461.308.png 809955461.309.png 809955461.310.png 809955461.311.png 809955461.312.png 809955461.313.png 809955461.314.png 809955461.316.png 809955461.317.png 809955461.318.png 809955461.319.png 809955461.320.png 809955461.321.png 809955461.322.png 809955461.323.png 809955461.324.png 809955461.325.png 809955461.327.png 809955461.328.png 809955461.329.png 809955461.330.png 809955461.331.png 809955461.332.png 809955461.333.png 809955461.334.png 809955461.335.png 809955461.336.png 809955461.338.png 809955461.339.png 809955461.340.png 809955461.341.png 809955461.342.png 809955461.343.png 809955461.344.png 809955461.345.png 809955461.346.png 809955461.347.png 809955461.349.png 809955461.350.png 809955461.351.png 809955461.352.png 809955461.353.png 809955461.354.png 809955461.355.png 809955461.356.png 809955461.357.png 809955461.358.png 809955461.360.png 809955461.361.png 809955461.362.png 809955461.363.png 809955461.364.png 809955461.365.png 809955461.366.png 809955461.367.png 809955461.368.png 809955461.369.png 809955461.371.png 809955461.372.png 809955461.373.png 809955461.374.png 809955461.375.png 809955461.376.png 809955461.377.png 809955461.378.png 809955461.379.png 809955461.380.png 809955461.382.png 809955461.383.png 809955461.384.png 809955461.385.png 809955461.386.png 809955461.387.png 809955461.388.png 809955461.389.png 809955461.390.png 809955461.391.png 809955461.393.png 809955461.394.png 809955461.395.png 809955461.396.png 809955461.397.png 809955461.398.png 809955461.399.png 809955461.400.png 809955461.401.png 809955461.402.png 809955461.404.png 809955461.405.png 809955461.406.png 809955461.407.png 809955461.408.png 809955461.409.png 809955461.410.png 809955461.411.png 809955461.412.png 809955461.413.png 809955461.415.png 809955461.416.png 809955461.417.png 809955461.418.png 809955461.419.png 809955461.420.png 809955461.421.png 809955461.422.png 809955461.423.png 809955461.424.png 809955461.426.png 809955461.427.png 809955461.428.png 809955461.429.png 809955461.430.png 809955461.431.png 809955461.432.png 809955461.433.png 809955461.434.png 809955461.435.png 809955461.437.png 809955461.438.png 809955461.439.png 809955461.440.png 809955461.441.png 809955461.442.png 809955461.443.png 809955461.444.png 809955461.445.png 809955461.446.png 809955461.448.png 809955461.449.png 809955461.450.png 809955461.451.png 809955461.452.png 809955461.453.png 809955461.454.png 809955461.455.png 809955461.456.png 809955461.457.png 809955461.459.png 809955461.460.png 809955461.461.png 809955461.462.png 809955461.463.png 809955461.464.png 809955461.465.png 809955461.466.png 809955461.467.png 809955461.468.png 809955461.470.png 809955461.471.png 809955461.472.png
 

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin