GH_dp-asi-link-advanced_76.pdf

Preface, Contents

Technical Description, Installation

Instructions, Operation

Configuration Overview

SIMATIC NET

DP/AS - INTERFACE LINK

Advanced

Manual

Getting Started - Example with

STEP 7

Keypad and Display

Display/WBM Configuration

Configuration - STEP 7

Data Exchange between

DP Master and AS-i Slave

Using the Command Interface

DP Slave Diagnostics

Eliminating Problems /

Error Displays

Appendix

AS-Interface Protocol

Implementation Conformance

Statements

References

Notes on the CE Label

Glossary

Index

Release 04/2006

C79000 - G8976 - C209 - 01

Classification of the Safety - Related Notices

This manual contains notices which you should observe to ensure your own

personal safety, as well as to protect the product and connected equipment. These

notices are highlighted in the manual by a warning triangle and are marked as

follows according to the level of danger:

Danger

indicates that death, severe personal injury will result if proper precautions are not

taken.

Warning

indicates that death, severe personal injury can result if proper precautions are not

taken.

Caution

with warning triangle indicates that minor personal injury can result if proper pre-

cautions are not taken.

Vorsicht

without warning triangle indicates that damage to property can result if proper pre-

cautions are not taken.

Notice

indicates that an undesirable result or status can occur if the relevant notice is

ignored.

Note

highlights important information on the product, using the product, or part of the

documentation that is of particular importance and that will be of benefit to the

user.

SIMATIC NETDP/AS- INTERFACE LINK Advanced

Release 04/2006

C79000-G8976-C209-01

Trademarks

SIMATIC

, SIMATIC HMI

and SIMATIC NET

are registered trademarks of

SIEMENS AG.

Third parties using for their own purposes any other names in this document which

refer to trademarks might infringe upon the rights of the trademark owners.

Safety Instructions Regarding your Product

Before you use the product described here, read the safety instructions below

thoroughly.

Qualified Personnel

Only qualified personnel should be allowed to install and work on this equipment.

Qualified persons are defined as persons who are authorized to commission, to

ground, and to tag circuits, equipment, and systems in accordance with

established safety practices and standards.

Correct Usage of Hardware Products

Note the following:

Warning

This device and its components may only be used for the applications described in

the catalog or the technical description, and only in connection with devices or

components from other manufacturers which have been approved or recommen-

ded by Siemens.

This product can only function correctly and safely if it is transported, stored, set

up, and installed correctly, and operated and maintained as recommended.

Before you use the supplied sample programs or programs you have written your-

self, make certain that no injury to persons nor damage to equipment can result in

your plant or process.

EC Notice: Commissioning must not be carried out until it has been established

that the machine in which this component is to be installed complies with the

conditions of directive 89/392/EEC.

Correct Usage of Software Products

Note the following:

Warning

This software may only be used for the applications described in the catalog or the

technical description, and only in connection with devices or software products

from other manufacturers which have been approved or recommended by Sie-

mens.

Before you use the supplied sample programs or programs you have written your-

self, make certain that no injury to persons nor damage to equipment can result in

your plant or process.

SIMATIC NETDP/AS- INTERFACE LINK Advanced

Release 04/2006

C79000-G8976-C209-01

Prior to Startup

Before putting the product into operation, note the following:

Vorsicht

Prior to startup you must observe the instructions in the relevant documentation.

For ordering data of the documentation please refer to the catalogs or contact your

local SIEMENS representative.

The reproduction, transmission or use of this document or its contents is not

permitted without express written authority. Offenders will be liable for

damages. All rights, including rights created by patent grant or registration of

a utility model or design, are reserved.

Disclaimer

We have checked the contents of this manual for agreement with the

hardware and software described. Since deviations cannot be precluded

entirely, we cannot guarantee full agreement. However, the data in this

manual are reviewed regularly and any necessary corrections included in

subsequent editions. Suggestions for improvement are welcomed.

Siemens AG

Automation and Drives

Industrial Communication

Postfach 4848, 90327 Nürnberg, Germany

Technical data subject to change.

Siemens Aktiengesellschaft

G79000- G8976- C209- 01

SIMATIC NETDP/AS- INTERFACE LINK Advanced

Release 04/2006

C79000-G8976-C209-01

Preface

Purpose of the Manual

This manual supports you when using the DP/AS - INTERFACE LINK Advanced

module, the product name is also shortened to DP/AS - i Link Adv. in places. It

contains information about how PROFIBUS DP masters can address AS-i

actuators and AS-i sensors via this module.

We recommend the following procedure when ...

... You want an overall picture of the AS-Interface:

- First read the ‘AS-Interface Introduction and Basic Information’ manual (not

part of this documentation package). This contains general information

about the AS-Interface , abbreviated to AS-i in the following chapters.

... You want to set up an AS-i system and include the DP/AS - INTERFACE Link

Adv. :

- You will find the information you require about connecting and operating the

DP/AS - i Link Adv. in Chapters 1 and 3.

... You want to know how to operate the DP/AS - INTERFACE LINK Advanced

from the point of view of the PROFIBUS DP master:

- Read Chapters 4 - 6 in this manual .

- Chapter 8 explains the com mand interface.

Requirements

To understand this manual, you require the following:

A working knowledge of PROFIBUS DP

Knowledge of the manual ‘AS - Interface Introduction and Basic Information’.

Data Medium with GSD File

The accompanying CD contains the GSD file that you require for configuring a

DP/AS - Interface Link Advanced with your DP master (see Section 6.3 ).

SIMATIC NETDP/AS- INTERFACE LINK Advanced

Release 04/2006

C79000-G8976-C209-01

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: