s7300_module_data_manual_en-US_en-US[1].pdf

Preface

SIMATIC S7-300 S7-300 Module data

______________

General technical data

______________

SIMATIC

______________

Digital modules

S7-300

S7-300 Module data

______________

Manual

______________

This description forms part of the documentation

package with the order number:

S7-300 Automation System: 6ES7398-8FA10-8BA0

______________

08/2009

A5E00105505-06

______________

Power supply modules

Principles of analog value

processing

Representation of the analog

values of analog modules

Analog modules

Other signal modules

Interface modules

RS 485 Repeater

Parameter sets of signal

modules

Diagnostics data of signal

modules

Dimensional drawings

Spare parts and accessories

for S7-300 modules

Directive on handling

Electrostatic-Sensitive

Devices (ESD)

Service & support

List of abbreviations

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

with a safety alert symbol, indicates that minor personal injury can result if proper precautions are not taken.

CAUTION

without a safety alert symbol, indicates that property damage can result if proper precautions are not taken.

NOTICE

indicates that an unintended result or situation can occur if the corresponding information is not taken into

account.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The product/system described in this documentation may be operated only by personnel qualified for the specific

task in accordance with the relevant documentation for the specific task, in particular its warning notices and

safety instructions. Qualified personnel are those who, based on their training and experience, are capable of

identifying risks and avoiding potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended

or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

maintenance are required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be adhered to. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of the Siemens AG. The remaining trademarks in this

publication may be trademarks whose use by third parties for their own purposes could violate the rights of the

owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

Siemens AG

Industry Sector

Postfach 48 48

90026 NÜRNBERG

GERMANY

A5E00105505-06

Ⓟ 09/2009

Technical data subject to change

Legal information

Preface

Purpose of the manual

The information contained in this manual can be used as a reference to operating, to

functions, and to the technical data of the signal modules, power supply modules and

interface modules of the S7-300.

Refer to the relevant S7-300 or ET 200M manuals to find out how to assemble and wire the

modules.for system installation.

Basic knowledge required

This manual presumes general knowledge in the field of automation engineering.

Range of validity of this manual

The manual describes the components based on the data valid at the time of its release.

SIEMENS reserves the right to include product information for each new module of a later

version.

Changes compared to the previous version

Changes / enhancements compared to the previous version described in this manual:

● New power supply module PS 307; 10 A; 6ES7307-1KA01-0AB0

● New digital input module SM 321 DI 64 x DC 24V, sinking/sourcing;

6ES7321-1BP00-0AA0

● New digital output module SM 322 DO 64 x DC 24V/0.3 A sourcing;

6ES7322-1BP00-0AA0

● New digital output module SM 322 DO 64 x DC 24V/0.3 A sinking;

6ES7322-1BP50-0AA0

● New analog input module SM 331; AI 6 x TC isolated; 6ES7331-7PE10-0AB0

● New analog input module SM 331; AI 8 x 13 bits; 6ES7331-1KF02-0AB0

● New position decoder module SM 338; POS-INPUT; 6ES7338-4BC01-0AB0

● Fault correction

S7-300 Module data

Manual, 08/2009, A5E00105505-06

Preface

Position in the overall documentation structure

The following documentation forms part of the S7-300 documentation package. You can also

find this, along with the associated entry ID, on the Internet

( http://support.automation.siemens.com/WW/view/en/ ) .

Name of the manual

Description

Manual

CPU 31xC and CPU 31x, technical data

Entry ID: 12996906

Control and display elements, communication,

memory concept, cycle and reaction times,

technical data.

Operating Instructions

S7-300, CPU 31xC and CPU 31x: Installation

Entry ID: 13008499

Project design, installation, wiring, addressing,

commissioning, maintenance and test functions,

diagnostics and troubleshooting.

System Manual

PROFINET system description

Entry ID: 19292127

Basic description of PROFINET:

Network components, data exchange and

communication, PROFINET IO, Component-

based Automation, application example of

PROFINET IO and Component-based

Automation.

Programming Manual

Migration from PROFIBUS DP to PROFINET IO

Entry ID: 19289930

Guideline for migration from PROFIBUS DP to

PROFINET IO.

Manual

CPU 31xC: Technological functions

Entry ID: 12429336

CD containing examples

Description of the technological functions:

positioning, counting, point-to-point coupling, loop

control.

The CD contains examples of the technological

functions.

YOU ARE CURRENTLY READING the Manual

S7-300 Automation System: Module Data

Entry ID: 8859629

Description of the functions and technical data of

signal/ power supply/ interface modules.

Instructions List

CPU 31xC, CPU 31x,

IM151-7 CPU, IM154-8 CPU, BM 147-1 CPU,

BM 147-2 CPU

Entry ID: 13206730

CPU 312, CPU 314, CPU 315-2 DP

CPU 315-2 PN/DP, CPU 317-2 PN/DP,

CPU 319-3 PN/DP as of V3.0

Entry ID: 31977679

List of the CPU's instruction set and

corresponding execution times. List of executable

blocks (OBs, SFCs, SFBs) and their execution

times.

Getting Started

Available anthology of Getting Started manuals:

S7-300 Getting Started

Entry ID: 15390497

PROFINET Getting Started Collection

Entry ID: 19290251

Using concrete examples, the Getting Started

documentation provides step-by-step instructions

focused on commissioning a fully functional

application.

S7-300 Module data

Manual, 08/2009, A5E00105505-06

Preface

Other manuals on S7-300 and ET 200M

Name of the manual

Description

Reference Manual

CPU Data: CPU 312 IFM - 318-2 DP

Entry ID: 8860591

Control and display elements, communication,

memory concept, cycle and reaction times,

technical data

Installation Manual

S7-300 Automation System: Installation: CPU

312 IFM – 318-2 DP

Entry ID: 15390415

Project design, installation, wiring, addressing,

commissioning, maintenance and test functions,

diagnostics and troubleshooting.

Configuring Manual

ET 200M signal modules for process automation

Entry ID: 7215812

Description of integration in process automation,

parameter configuration using SIMATIC PDM,

digital input modules, digital output modules.

Manual

Distributed I/O Device ET 200M

HART analog modules

Entry ID: 22063748

Description of configuration and commissioning

of HART analog modules.

Manual

Distributed I/O Device ET 200M

Entry ID: 1142798

Description of configuration, assembly and wiring.

Manual

SM 335 - High-speed analog mixed module for

SIMATIC S7-300

Entry ID: 1398483

Description of how to use the SM 335 module in

a SIMATIC S7-300.

Overview of operations, descriptions of functions,

and technical data relating to the SM 335.

Sign posts

The manual contains various features supporting quick access to specific information:

● The manual starts with a table of contents, including an index of the tables contained in

the manual.

● Key terms are explained in the glossary.

● You can use the index to find the key parts of the manual.

Approvals

See section Standards and approvals (Page 15 ).

CE approval

See section Standards and approvals (Page 15 ).

Mark for Australia (C-Tick-Mark)

See section Standards and approvals (Page 15 ).

S7-300 Module data

Manual, 08/2009, A5E00105505-06

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: