SONY STR-DA3300ES_DG1100_v1.2.pdf

(14294 KB) Pobierz
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
STR-DA3300ES/DG1100
SERVICE MANUAL
US Model
STR-DA3300ES/DG1100
Canadian Model
AEP Model
UK Model
STR-DA3300ES
Photo: STR-DA3300ES
This receiver incorporates Dolby* Digital and Pro Logic Surround and the DTS** Digital Surround System.
*Manufactured under license from Dolby Laboratories.
Dolby, Pro Logic, Surround EX, and the double-D symbol are trademarks of Dolby Laboratories.
** Manufactured under license from DTS, Inc.
“DTS”, “DTS-ES” and “Neo:6” are registered trademarks of DTS, Inc. “DTS 96/24” is a trademark of DTS, Inc.
SPECIFICATIONS
AUDIO POWER
SPECIFICATIONS
(US model)
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
With 8 ohm loads, both channels driven, from
20 – 20,000 Hz; rated 100 watts per channel
minimum RMS power, with no more than
0.09% total harmonic distortion from 250
milliwatts to rated output.
Reference Power Output
(4 ohms 1 kHz, THD 0.7%)
FRONT 2) :
100 W + 100 W
CENTER 2) : 100 W
SURROUND 2) :
100 W + 100 W
SUR BACK 2) :
100 W + 100 W
1) Depending on the sound field settings and the
source, there may be no sound output.
2) Measured under the following conditions:
Power requirements: 120 V AC, 60 Hz
Frequency response
Reference Power Output
(8 ohms 20 Hz – 20 kHz,
THD 0.09%)
FRONT 2) :
100 W + 100 W
CENTER 2) :
100 W
SURROUND 2) :
100 W + 100 W
SURROUND BACK 2) :
100 W + 100 W
Reference Power Output
(4 ohms 20 Hz – 20 kHz,
THD 0.7%)
FRONT 2) :
100 W + 100 W
CENTER 2) :
100 W
SURROUND 2) :
100 W + 100 W
SURROUND BACK 2) :
100 W + 100 W
Reference Power Output at Stereo Mode
(8 ohms 1 kHz, THD
10%):
130 W + 130 W
Reference Power Output at Stereo Mode
(4 ohms 1 kHz, THD
10%):
130 W + 130 W
Amplifier section
PO
DA3300ES: US and Canadian models/
DG1100:
WER OUTPUT
PHONO
RIAA equalization curve
±
0.5 dB
Rated Power Output at Stereo Mode 1) 2)
(8 ohms 20 Hz – 20 kHz,
THD 0.09%):
100 W + 100 W
Reference Power Output at Stereo Mode
(4 ohms 20 Hz – 20 kHz,
THD 0.15%):
85 W + 85 W
Reference Power Output
(8 ohms 1 kHz, THD 0.7%)
FRONT 2) :
110 W + 110 W
CENTER 2) : 110 W
SURROUND 2) :
110 W + 110 W
SUR BACK 2) :
110 W + 110 W
MULT I CHANNEL
INPUT, SA-CD/CD,
MD/TAPE, DVD/BD,
TV, SAT/CATV
VIDEO 1/2/3
10 Hz – 100 kHz
±
3 dB
DA3300ES: AEP, Russian, Ukrainian and
UK models:
wer Output at Stereo Mode 1) 2)
(8 ohms 1 kHz, THD
0.7%):
105 W + 105 W
Reference Power Output at Stereo Mode 2)
(4 ohms 1 kHz, THD
0.7%):
105 W + 105 W
Rated Po
– Continued on next page –
MULTI CHANNEL AV RECEIVER
Sony Corporation
Home Audio Division
Published by Sony Techno Create Corporation
9-887-742-03
2007J05-1
© 2007.10
868216811.034.png 868216811.035.png 868216811.036.png 868216811.037.png 868216811.001.png 868216811.002.png 868216811.003.png 868216811.004.png 868216811.005.png 868216811.006.png
STR-DA3300ES/DG1100
Outputs
General
Po
DA3300ES: US and Canadian models/DG1100:
Reference Power Output
(8 ohms 1 kHz, THD 10%)
FRONT 2) :
130 W + 130 W
CENTER 2) :
130 W
SURROUND 2) :
130 W + 130 W
SURROUND BACK 2) :
130 W + 130 W
Reference Power Output
(4 ohms 1 kHz, THD 10%)
FRONT 2) :
130 W + 130 W
CENTER 2) :
130 W
SURROUND 2) :
130 W + 130 W
SURROUND BACK 2) :
130 W + 130 W
wer requirements
MD/TAPE (REC OUT),
VIDEO 1 (AUDIO OUT)
Vo ltage:150 mV
Impedance: 1 kohm
120 V AC, 60 Hz
DA3300ES: AEP, Russian, Ukrainian and
UK models:
FRONT L/R, CENTER,
SURROUND L/R,
SUR BACK L/R, SUB
WOOFER
Vo ltage: 2 V
Impedance: 1 kohm
230 V AC, 50/60 Hz
(in countries/area in
Europe other than the U.K.)
230 – 240 V AC, 50/60 Hz
(in the U.K. and general area)
EQUALIZER
Gain levels
±10 dB, 1 dB step
Power output (DIGITAL MEDIA PORT)
DC OUT
: 5 V, 700 mA
FM tuner section
Tuning range 87.5 – 108.0 MHz
Antenna (aerial) FM wire antenna (aerial)
Antenna (aerial) terminals
75 ohms, unbalanced
Power consumption
DA3300ES: US and Canadian models/DG1100:
350 W/480 VA (US/Canada)
DA3300ES: AEP, Russian, Ukrainian and
UK models:
390 W
AM tuner section
Power consumption (during standby mode)
0.7 W (when “HDMI
Control” and “RS-232C
Control” are set to “OFF”)
DA3300ES: US and Canadian models/DG1100:
Tuning range
With 10-kHz tuning scale
530 – 1,710 kHz 3)
With 9-kHz tuning scale
531 – 1,710 kHz 3)
Antenna (aerial) Loop antenna (aerial)
3) Yo u can change the AM tuning scale to either 9
kHz or 10 kHz. After tuning in any AM station,
turn off the receiver. While holding down
TUNING MODE, press POWER on the receiver.
All preset stations will be erased when you change
the tuning scale. To reset the scale to 10 kHz (or 9
kHz), repeat the procedure.
1) Depending on the sound field settings and the
source, there may be no sound output.
2) Measured under the following conditions:
Power requirements: 230 V AC, 50/60 Hz
(in countries/area in Europe
other than the U.K.)
240 V AC, 50/60 Hz
(in the U.K. and general
area)
Dimensions
430 mm
(width/height/depth)
including projecting parts
and controls
Mass (Approx.) 14.5 kg
Supplied accessories
Operating Instructions
Quick Setup Guide (1)
HDMI CONTROL Guide (1)
GUI Menu List (1)
Optimizer microphone ECM-AC2 (1)
FM wire antenna (aerial) (1)
AM loop antenna (aerial) (1)
AC power cord (mains lead) (1) (DA3300ES)
Remote commander RM-AAL011 (1)
(DA3300ES: US and Canadian models)
Remote commander RM-AAP019 (1)
(DA3300ES: AEP, Russian, Ukrainian and UK models)
430
×
175
×
Frequency response
PHONO
RIAA equalization curve
±
0.5 dB
MULTI CHANNEL
INPUT, SA-CD/CD,
MD/TAPE, DVD/BD,
TV, SAT/CATV,
VIDEO 1/2/3
10 Hz – 100 kHz
± 3 dB
DA3300ES: AEP, Russian, Ukrainian and
UK models:
Tu
ning range
531 – 1,602 kHz
(With 9-kHz tuning scale)
Antenna (aerial)
Loop antenna (aerial)
Video section
Inputs/Outputs
Video: 1 Vp-p, 75 ohms
COMPONENT VIDEO:
Y: 1 Vp-p, 75 ohms
P B /C B : 0.7 Vp-p, 75 ohms
P R /C R : 0.7 Vp-p, 75 ohms
80 MHz HD Pass Through
Inputs (Analog)
PHONO
Sensitivity: 2.5 mV
Impedance: 50 kohms
S/N: 90 dB (A, 20 kHz
LPF)
Remote commander RM-AAU018 (1)
(DA3300ES)
Remote commander RM-AAP018 (1)
(DG1100)
MULT I CHANNEL
INPUT, SA-CD/CD,
MD/TAPE, DVD/BD,
TV, SAT/CATV,
VIDEO 1/2/3
Sensitivity: 150 mV
Impedance: 50 kohms
S/N: 100 dB (A, 20 kHz
LPF)
R6 (size-AA) batteries
(4 (DA3300ES) or 2 (DG1100))
Design and specifications are subject to
change without notice.
HDMI Video
Input/Output (HDMI Repeater block)
640
Inputs (Digital)
480p@60 Hz
720 × 480p@59.94/60 Hz
1440
×
DVD/BD,VIDEO 2,
SA-CD/CD (Coaxial)
Impedance: 75 ohms
S/N: 96 dB (A, 20 kHz
LPF)
×
480p@59.94/60 Hz (pixel sent 2times)
1280
720p@59.94/60 Hz
1920 × 1080i@59.94/60 Hz
1920
×
VIDEO 1, VIDEO 3,
SAT/CATV, TV,
MD/TAPE (Optical)
S/N: 96 dB
(A, 20 kHz LPF)
×
1080p@59.94/60 Hz
720
×
576p@50 Hz
1440
×
576p@50 Hz (pixel sent 2times)
1280
×
720p@50 Hz
1920
×
1080i@50 Hz
1920
×
1080p@50 Hz
1920
×
1080p@24 Hz
2
868216811.007.png 868216811.008.png 868216811.009.png 868216811.010.png 868216811.011.png 868216811.012.png 868216811.013.png 868216811.014.png 868216811.015.png 868216811.016.png 868216811.017.png 868216811.018.png 868216811.019.png
 
STR-DA3300ES/DG1100
Notes on chip component replacement
•
Never reuse a disconnected chip component.
•
Notice that the minus side of a tantalum capacitor may be
damaged by heat.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety check before releasing the set to the customer:
Check the antenna terminals, metal trim, “metallized” knobs, screws,
and all other exposed metal parts for AC leakage.
Check leakage as described below.
LEAKAGE TEST
The AC leakage from any exposed metal part to earth ground and
from all exposed metal parts to any exposed metal part having a
return to chassis, must not exceed 0.5 mA (500 microamperes.).
Leakage current can be measured by any one of three methods.
1.
A commercial leakage tester, such as the Simpson 229 or RCA
WT-540A. Follow the manufacturers’ instructions to use these
instruments.
2.
A battery-operated AC milliammeter. The Data Precision 245
digital multimeter is suitable for this job.
3.
Measuring the voltage drop across a resistor by means of a
VOM or battery-operated AC voltmeter. The “limit” indication
is 0.75 V, so analog meters must have an accurate low-voltage
scale. The Simpson 250 and Sanwa SH-63Trd are examples
of a passive VOM that is suitable. Nearly all battery operated
digital multimeters that have a 2 V AC range are suitable. (See
Fig. A)
To Exposed Metal
Parts on Set
AC
voltmeter
(0.75 V)
0.15
µ
F
1.5 k
Ω
Earth Ground
Fig. A.
Using an AC voltmeter to check AC leakage.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE
WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE
PA RT NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR
IN SUPPLEMENTS PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 0 SUR
LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES
PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE
FONCTIONNEMENT. NE REMPLACER CES COM- POSANTS
QUE PAR DES PIÈCES SONY DONT LES NUMÉROS SONT
DONNÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS
PUBLIÉS PAR SONY.
3
868216811.020.png 868216811.021.png 868216811.022.png 868216811.023.png 868216811.024.png 868216811.025.png 868216811.026.png
STR-DA3300ES/DG1100
TABLE OF CONTENTS
1.
SERVICING NOTES ..............................................
5
6-25. Schematic Diagram
– TEMPERATURE DETECTION BOARD – ...............
52
6-26. Printed Wiring Board – A CLASS AMP Board – ..........
53
2.
GENERAL ..................................................................
11
6-27. Schematic Diagram – A CLASS AMP Board (1/2) – ....
54
6-28. Schematic Diagram – A CLASS AMP Board (2/2) – ....
55
3.
DISASSEMBLY
6-29. Printed Wiring Board – POWER AMP Board – ............
56
3-1.
Disassembly Flow ..........................................................
16
6-30. Schematic Diagram – POWER AMP Board – ...............
57
3-2.
Case ................................................................................
17
6-31. Printed Wiring Board – PROTECTOR (F-C) Board – ...
58
3-3.
Front Panel Block ...........................................................
17
6-32. Schematic Diagram – PROTECTOR (F-C) Board – ......
59
3-4.
CIS Board (DA3300ES: US and Canadian models),
Tuner (FM/AM) ..............................................................
6-33. Printed Wiring Boards
– PROTECTOR (SB/SURR) Section – ..........................
18
60
3-5.
D_AUDIO Board, DSP Board ........................................
18
6-34. Schematic Diagram
– PROTECTOR (SB/SURR) Section – .......................... 61
6-35. Printed Wiring Board – BIAS Board – ........................... 62
6-36. Schematic Diagram – BIAS Board – ............................. 63
6-37. Printed Wiring Boards – SPEAKER Section – .............. 64
6-38. Schematic Diagram – SPEAKER Section – ................... 65
6-39. Printed Wiring Boards – PREOUT Section – ................ 66
6-40. Schematic Diagram – PREOUT Section – ..................... 67
6-41. Schematic Diagram – MAIN Board (1/4) – ................... 68
6-42. Schematic Diagram – MAIN Board (2/4) – .................... 69
6-43. Schematic Diagram – MAIN Board (3/4) – ...................
3-6.
TUNER Board, CONTROL Board ................................
19
3-7.
PREOUT Board (DA3300ES), SUB WOOFER
Board (DG1100) and S_SPTM Board ............................
19
3-8.
D_VIDEO Board ............................................................
20
3-9.
A_VIDEO Board ............................................................
20
3-10. MAIN Board, C_SPTM Board .......................................
21
3-11. AC Board, Power Transformer (T001) ...........................
22
3-12. Power AMP Block ..........................................................
22
4.
TEST MODE .............................................................
23
70
6-44. Schematic Diagram – MAIN Board (4/4) – ...................
71
5.
ELECTRICAL ADJUSTMENTS ........................
27
6-45. Printed Wiring Board – MAIN Board – .........................
72
6-46. Schematic Diagram – D_VIDEO Board (1/9) – ............
73
6.
DIAGRAMS
6-47. Schematic Diagram – D_VIDEO Board (2/9) – ............
74
6-1.
Block Diagram – CONTROL Section – .........................
28
6-48. Schematic Diagram – D_VIDEO Board (3/9) – ............
75
6-2.
Block Diagram – DSP Section – ....................................
29
6-49. Schematic Diagram – D_VIDEO Board (4/9) – ............
76
6-3.
Block Diagram – HDMI Section – .................................
30
6-50. Schematic Diagram – D_VIDEO Board (5/9) – ............
77
6-4.
Block Diagram – VIDEO PROCESS Section – .............
31
6-51. Schematic Diagram – D_VIDEO Board (6/9) – ............
78
6-5.
Block Diagram – ANALOG AUDIO Section – .............
32
6-52. Schematic Diagram – D_VIDEO Board (7/9) – ............
79
6-6.
Block Diagram – POWER AMP Section – ....................
33
6-53. Schematic Diagram – D_VIDEO Board (8/9) – ............
80
6-7.
Block Diagram – VIDEO Section – ...............................
34
6-54. Schematic Diagram – D_VIDEO Board (9/9) – ............
81
6-8.
Block Diagram – PANEL, CIS, XM/
SIRIUS RECEIVER, DMPORT Section – ....................
6-55. Printed Wiring Board
– D_VIDEO Board (Component Side) – .......................
35
82
6-9.
Block Diagram – POWER SUPPLY Section – ..............
36
6-56. Printed Wiring Board
– D_VIDEO Board (Conductor Side) – .........................
6-10. Printed Wiring Board
– D_AUDIO Board (Component Side) – .......................
83
38
6-57. Printed Wiring Board
– A_VIDEO Board (Component Side) – ........................
6-11. Printed Wiring Board
– D_AUDIO Board (Conductor Side) – .........................
84
39
6-58. Printed Wiring Board
– A_VIDEO Board (Conductor Side) – .........................
6-12. Schematic Diagram – D_AUDIO Board (1/4) – ............
40
85
6-13. Schematic Diagram – D_AUDIO Board (2/4) – ............
41
6-59. Schematic Diagram – A_VIDEO Board (1/4) – .............
86
6-14. Schematic Diagram – D_AUDIO Board (3/4) – ............
42
6-60. Schematic Diagram – A_VIDEO Board (2/4) – .............
87
6-15. Schematic Diagram – D_AUDIO Board (4/4) – ............
43
6-61. Schematic Diagram – A_VIDEO Board (3/4) – .............
88
6-16. Printed Wiring Board
– TUNER Board (Component Side) – ...........................
6-62. Schematic Diagram – A_VIDEO Board (4/4) – .............
89
44
6-63. Printed Wiring Board – VIDEO3 Board – ......................
90
6-17. Printed Wiring Board
– TUNER Board (Conductor Side) – .............................
6-64. Schematic Diagram – VIDEO3 Board – ........................
91
45
6-65. Printed Wiring Board
– CONTROL Board (Component Side) – ......................
6-18. Schematic Diagram – TUNER Board (1/2) – ................
46
92
6-19. Schematic Diagram – TUNER Board (2/2) – ................
47
6-66. Printed Wiring Board
– CONTROL Board (Conductor Side) – ........................
6-20. Printed Wiring Board – DSP Board – ............................
48
93
6-21. Schematic Diagram – DSP Board – ...............................
49
6-67. Schematic Diagram – CONTROL Board (1/2) – ...........
94
6-22. Printed Wiring Boards – CONNECTOR Section – ........
50
6-68. Schematic Diagram – CONTROL Board (2/2) – ...........
95
6-23. Schematic Diagram – CONNECTOR Section – ............
51
6-69. Printed Wiring Board – CIS Board
(DA3300ES: US and Canadian models) – .....................
6-24. Printed Wiring Board
– TEMPERATURE DETECTION BOARD – ...............
96
52
4
STR-DA3300ES/DG1100
SECTION 1
SERVICING NOTES
6-70. Schematic Diagram – CIS Board
(DA3300ES: US and Canadian models) – ..................... 97
6-71. Printed Wiring Board – DISPLAY Board – ................... 98
6-72. Schematic Diagram – DISPLAY Board – ...................... 99
6-73. Printed Wiring Boards – PANEL Section – .................... 100
6-74. Schematic Diagram – PANEL Section – ........................ 101
6-75. Printed Wiring Board – DC-DC Board – ....................... 102
6-76. Schematic Diagram – DC-DC Board – .......................... 103
6-77. Printed Wiring Board – AC Board – ............................... 104
6-78. Schematic Diagram – AC Board – ................................. 105
UNLEADED SOLDER
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40 °C higher
than ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350 °C.
Caution: The printed pattern (copper foil) may peel away if
the heated tip is applied for too long, so be careful!
7.
EXPLODED VIEWS
7-1.
Case Section ................................................................... 146
7-2.
DISPLAY Board Section ................................................ 147
7-3.
Front Panel Section ........................................................ 148
7-4.
AC/DC-DC Boards Section ............................................ 149
7-5.
D_AUDIO/D_VIDEO Boards Section ........................... 150
Strong viscosity
Unleaded solder is more viscou-s (sticky, less prone to flow)
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
7-6.
A_VIDEO Board Section ............................................... 151
7-7.
Heat Sink Section ........................................................... 152
7-8.
MAIN Board Section ...................................................... 153
Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
8.
ELECTRICAL PARTS LIST ............................... 154
Note: Refer to SUPPLEMENT-1 for the A_VIDEO and AC boards
of printed wiring boards, schematic diagrams and electrical
parts list of DA3300ES: AEP, Russian, Ukrainian and UK
models.
Refer to SUPPLEMENT-1/SUPPLEMENT-2 for the MAIN
board of printed wiring board, schematic diagrams and
electrical parts list of DA3300ES: AEP and UK models.
Refer to SUPPLEMENT-2 for the MAIN and TUNER boards
of printed wiring boards, schematic diagrams and electrical
parts list of DA3300ES: Russian and Ukrainian models.
When repairing the set of DA3300ES: US, Canadian, AEP
and UK models/DG1100, refer to either of original service
manual/SUPPLEMENT-1/SUPPLEMENT-2 according to the
set.
MODEL IDENTIFICATION
– Back Panel –
PA RT No.
Model
PART No.
DA3300ES: AEP model
3-113-925-0[]
DA3300ES: UK model
3-113-925-1[]
DA3300ES: US and Canadian models
3-113-925-2[]
DG1100
3-113-925-3[]
DA3300ES: Russian and Ukrainian models
3-113-925-6[]
NOTE OF REPLACING THE IC3511 AND IC3513 ON
THE D_VIDEO BOARD
IC3511 and IC3513 on the D_VIDEO board cannot exchange with
single. When IC3511 and IC3513 on the D_VIDEO board are
damaged, exchange the entire mounted board.
NOTE OF REPLACING THE IC3601 ON THE
D_VIDEO BOARD
Replacement of IC3601 on the D_VIDEO board used in this set
requires a special tool.
5
868216811.027.png 868216811.028.png 868216811.029.png 868216811.030.png 868216811.031.png 868216811.032.png 868216811.033.png
 

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin