Here are the instruction that you may need : On the computer Download the latest keyserver from page 2 posted by rab v1.1 Extract the files Right click on keyserver.exe and open as administrator Now you will see the main keyserver screen.Minimize this for now Now Open windows start button and type command in the search box and press enter In the terminal screen type ipconfig Note down the following thing ipv4 address : This is the ip address of your computer subnet mask default gateway these are the values we need to enter into the phone Now go to the network sharing centre in windows On the left lower hand corner click on windows firewall turn off windows firewall for home and public networks Now in the htc hero go to settings wi-fi settings ---->turn on wifi : check ----->click on menu button on your phone--->advanced---->check use static IP Now in the IP adress enter a imaginary address outside your range for eg if the ipv4 address in your computer was 10.0.1.1 ,then enter 10.0.1.101.if it was 192.168.2.1 then enter 192.168.2.101. My point being you can probably get away with putting 101 to the last 2 digits of you ipv4 address gateway is the same a your computer default gateway Netmask same as your computer subnet mask DNS 1 is same as your ipv4 address of your computer press menu again and click save Ok now we go back to the keyserver check send reader updates ,enable DNS server ,save incoming requests to debug .log Now in this hosts ip enter your ipv4 address Check mark the software titles you want Go back to the the phone open the skyscape programme which you should download and install from market go to update resources if it asks your password and username(usually a email address) just type any imaginary one updating of your phone should start ---------------------------------------------------------------------------
nurusz