easynote v mv.pdf

Packard Bell

EasyNote V / MV

Disassembly Manual

Table of Contents

Overview ..................................................................................................................3

Disassembly Instructions..........................................................................................3

Reassembly Instructions ..........................................................................................3

Required Tools .........................................................................................................3

Hazardous Voltage ...................................................................................................4

Avoid Electrostatic Discharge...................................................................................4

Power Supply Unit ....................................................................................................4

Base Assembly ............................................................................................................5

Battery ......................................................................................................................5

Hard Disk Drive ........................................................................................................5

Optical Disc Drive .....................................................................................................6

Memory Modules ......................................................................................................7

Bluetooth Module (Optional).....................................................................................8

CPU..........................................................................................................................9

Wireless LAN Card .................................................................................................10

TV Card (optional) ..................................................................................................11

Keyboard ................................................................................................................11

Speakers ................................................................................................................12

Mainboard ..............................................................................................................13

Modem ...................................................................................................................17

Subwoofer ..............................................................................................................17

USB/TV-Out/DC-Board...........................................................................................18

TV Aerial Connector (Optional) ..............................................................................18

Touchpad ...............................................................................................................18

LCD Assembly ...........................................................................................................19

LCD Panel ..............................................................................................................20

Inverter Board.........................................................................................................20

WLAN Antenna.......................................................................................................21

LCD Latch ..............................................................................................................21

Notice .....................................................................................................................22

Overview

This document contains step-by-step disassembly instructions for the EasyNote V / MV chassis. The

instructions are illustrated where necessary with images of the part that is being removed or

disassembled.

Packard Bell reserves the right to make changes to the chassis without notice.

Disassembly Instructions

When disassembling the system unit, follow these general rules:

Turn off the power.

Disconnect the AC adapter.

Remove the battery.

Do not disassemble the system into parts that are smaller than those specified in the

instructions.

Label all removed connectors; note where the connector goes and in what position it was

installed.

Reassembly Instructions

Reassembly is the reverse of the disassembly process. Use care to ensure that all cables and screws are

returned to their proper positions. Check that no tools or any loose parts have been left inside the

chassis. Check that everything is properly installed and tightened.

Required Tools

All disassembly procedures can be performed using the following tools:

Philips (#2 bit) screwdriver

Hazardous Voltage

There is hazardous voltage present inside the

computer when it is connected to an AC supply, even

when the computer’s power switch is off. Exposure to

hazardous voltage could cause personal injury. To

avoid risk of injury, contact an Authorized Service

Provider for proper (un)installation of optional

hardware devices.

WARNING

Ensure that the computer is disconnected

from its power source and from all

telecommunications links, networks, or

modem lines whenever the chassis cover is

removed. Do not operate the computer with

the cover removed.

AVERTISSEMENT

Assurez-vous que le système est

débranché de son alimentation ainsi que de

toutes les liaisons de télécommunication,

des réseaux, et des lignes de modem avant

d’enlever le capot. Ne pas utiliser le

système quand le capot est enlevé.

Avoid Electrostatic Discharge

Electrostatic electricity can easily damage circuit cards

and integrated circuits (ICs). To reduce risk of

damage, store them in protective packaging whenever

they are not installed in your system.

WARNUNG

Das System darf weder an eine

Stromquelle angeschlossen sein noch eine

Verbindung mit einer

Telekommunikationseinrichtung, einem

Netzwerk oder einer Modem-Leitung haben,

wenn die Gehäuseabdeckung entfernt wird.

Nehmen Sie das System nicht ohne die

Abdeckung in Betrieb.

Add-in cards can be extremely sensitive to ESD and

always require careful handling. After removing the

card from the computer, place the card flat on a

grounded, static-free surface, component-side up. Use

a conductive foam pad if available, but not the card

wrapper. Do not slide the card over any surface.

Before you install or remove memory modules, video

memory, disk drives, circuit cards or other devices,

protect them from static electricity. To do so, make

sure your computer’s power switch is OFF. Then,

unplug the computer’s AC power cord. Before picking

up the device you (un)install, you should wear an anti-

static wrist wrap (available at electronic supply stores).

Be sure to connect the wrist wrap to an unpainted

metal portion of the computer chassis. As an

alternative, you can dissipate electrostatic build-up by

touching an unpainted metal portion of the computer

chassis with one hand. Then touch the device you are

(un)installing with the other hand, and maintain

continuous contact with it until it is (un)installed in the

computer.

ADVERTENCIA

Asegúrese de que cada vez que se quite la

cubierta del chasis, el sistema haya sido

desconectado de la red de alimentación y

de todos lo enlaces de telecomunicaciones,

de red y de líneas de módem. No ponga en

funcionamiento el sistema mientras la

cubierta esté quitada.

WAARSCHUWING

Zorg er voor dat alle verbindingen van en

naar de computer (stroom, modem,

netwerk, etc) verbroken worden voordat de

behuizing geopend wordt. Zet de computer

nooit aan als de behuizing geopend is.

Power Supply Unit

Under no circumstances should you attempt to

disassemble the power supply. The power supply

contains no user-serviceable parts. Inside the power

supply are hazardous voltages that can cause serious

personal injury. Always return a defective power

supply to your dealer.

AVVERTENZA

Prima di rimuovere il coperchio del telaio,

assicurarsi che il sistema sia scollegato

dall’alimentazione, da tutti i collegamenti di

comunicazione, reti o linee di modem. Non

avviare il sistema senza aver prima messo

a posto il coperchio.

Base Assembly

Battery

1. Slide aside the two latches and slide out the battery.

Hard Disk Drive

1. Remove the battery as described in chapter Battery .

2. Remove the 2 screws and lift the HDD cover.

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: