XC PLC xc 200 i 200xV.pdf

User Manual

10/10 MN05003001Z-EN

replaces 01/08 AWB2724-1491GB

Modular PLC

XC-CPU201-…(-XV)

XC-CPU202-…-XV

All brand and product names are trademarks or registered trademarks of the owner

concerned.

Emergency On Call Service

Please call your local representative:

http://www.eaton.com/moeller/aftersales

Hotline of the After Sales Service:

+49 (0) 180 5 223822 (de, en)

AfterSalesEGBonn@eaton.com

Original Operating Instructions

The German-language edition of this document is the original operating manual.

Translation of the original operating manual

All editions of this document other than those in German language are translations of

the original German manual.

1 st published 2003, edition date 12/03

2 nd edition 2004, edition date 12/03

3 rd edition 2004, edition date 04/04

4 th edition 2004, edition date 06/04

5 th edition 2004, edition date 08/04

6 th edition 2004, edition date 11/04

7 th edition 2005, edition date 03/05

8 th edition 2005, edition date 11/05

9 th edition 2006, edition date 09/06

10 th edition 2006, edition date 12/06

11 th edition 2007, edition date 04/07

12 th edition 2008, edition date 01/08

13 th edition 2010, edition date 10/10

See revision protocol in the “About this manual“ chapter

Production: René Wiegand

Translation: globaldocs GmbH

No part of this manual may be reproduced in any form (printed, photocopy, microfilm

or any other process) or processed, duplicated or distributed by means of electronic

systems without written permission of Eaton Industries GmbH, Bonn.

Subject to alteration without notice.

Danger!

Dangerous electrical voltage!

Before commencing the installation

• Disconnect the power supply of the

device.

• Ensure that devices cannot be

accidentally restarted.

• Verify isolation from the supply.

• Earth and short circuit.

• Cover or enclose neighbouring units

that are live.

• Follow the engineering instructions

IL (previously AWA) of the device

concerned.

• Only suitably qualified personnel in

accordance with EN 50110-1/-2

(VDE 0105-100) may work on this

device/system.

• Before installation and before

touching the device ensure that you

are free of electrostatic charge.

• The functional earth (FE) must be

connected to the protective earth

(PE) or to the potential equalisation.

The system installer is responsible

for implementing this connection.

• Connecting cables and signal lines

should be installed so that inductive

or capacitive interference does not

impair the automation functions.

• Install automation devices and

related operating elements in such

a way that they are well protected

against unintentional operation.

• Suitable safety hardware and

software measures should be

implemented for the I/O interface

so that a line or wire breakage on

the signal side does not result in

undefined states in the automation

devices.

• Ensure a reliable electrical isolation

of the low voltage for the 24 volt

supply. Only use power supply

units complying with IEC 60364-4-

41 or HD 60364-4-41

(VDE 0100-410).

• Deviations of the mains voltage

from the rated value must not

exceed the tolerance limits given in

the specifications, otherwise this

may cause malfunction and

dangerous operation.

• Emergency stop devices complying

with IEC/EN 60204-1 must be

effective in all operating modes of

the automation devices. Unlatching

the emergency-stop devices must

not cause restart.

• Devices that are designed for

mounting in housings or control

cabinets must only be operated and

controlled after they have been

installed with the housing closed.

Desktop or portable units must only

be operated and controlled in

enclosed housings.

• Measures should be taken to

ensure the proper restart of

programs interrupted after a voltage

dip or failure. This should not cause

dangerous operating states even

for a short time. If necessary,

emergency-stop devices should be

implemented.

• Wherever faults in the automation

system may cause damage to

persons or property, external

measures must be implemented to

ensure a safe operating state in the

event of a fault or malfunction (for

example, by means of separate

limit switches, mechanical

interlocks etc.).

Contents

About This Manual..................................................................... 5

0.1

List of revisions ............................................................................ 5

0.2

Writing Conventions..................................................................... 6

0.3

Additional documentation ............................................................ 6

1 Design of the XC200 PLC........................................................... 7

1.1 Rack ............................................................................................. 7

1.1.1 Performance scope of the CPU ................................................... 8

1.1.2 Functional spans .......................................................................... 8

1.1.3 Power supply ............................................................................... 9

1.1.4 Local inputs/outputs..................................................................... 9

1.1.5 Processor unit with interfaces ..................................................... 11

1.1.6 Real-time clock............................................................................. 11

1.1.7 Battery.......................................................................................... 11

1.1.8 Multimedia card (MMC), secure digital card (SD), USB stick....... 12

1.1.9 CPU drives ................................................................................... 12

1.1.10 ETH232 programming interface ................................................... 13

1.1.11 Splitting of the ETH232 interface ................................................. 13

1.1.12 CAN/easyNet interface................................................................. 14

1.1.13 Reaction of the station on the CAN bus....................................... 15

1.1.14 Supplementary functions of the CPU (local inputs)...................... 17

2 CPU installation.......................................................................... 19

2.0.1 Detaching the CPU....................................................................... 19

3 Engineering................................................................................. 20

3.1 Control panel layout ..................................................................... 20

3.1.1 Aeration........................................................................................ 20

3.1.2 Device arrangement..................................................................... 21

3.2 Preventing interference................................................................ 21

3.2.1 Cable routing and wiring .............................................................. 21

3.2.2 Suppressor circuitry for interference sources .............................. 22

3.2.3 Screen earth kit ............................................................................ 22

3.3 Lighting protection ....................................................................... 22

3.3.1 External lightning protection ........................................................ 22

3.3.2 Internal lightning protection ......................................................... 22

3.4 Connections ................................................................................. 23

3.4.1 Connecting the power supply ...................................................... 23

3.4.2 Connecting inputs/outputs (central processing unit).................... 23

3.4.3 Connecting the incremental value encoder.................................. 24

3.4.4 Connecting up/down counter....................................................... 25

3.4.5 Connecting interrupt actuators .................................................... 25

3.4.6 Connect PC .................................................................................. 26

3.5 Interface assignments.................................................................. 27

3.5.1 USB interface ............................................................................... 27

3.5.2 XC200 programming interface ..................................................... 27

3.5.3 CAN/easyNet interface................................................................. 28

Modular PLC XC-CPU201-…(-XV), XC-CPU202-…-XV 10/10 MN05003001Z-EN www.eaton.com

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: