ALCATEL BE4,BE5 WORKSHOP ********************************************************************* Versions supported for unlocking: BE4: 134K,135K,135C,136K,136C,137K,138K,139K BE5: 121,122,123,124. ---------------------------------------------------------------------- Versions supported for cloning(downgrading/upgrading): All BE4 and BE5 versions ---------------------------------------------------------------------- Versions supported for direct IMEI changing: BE4: 136C,137K,138K,139K BE5: 123,124(CF598320) ********************************************************************* SHORT HELP ABOUT SOFT USING ********************************************************************* UNLOCKER SECTION: 1.For phone unlocking simply press button "Unlock".If checkbox "Auto backup" is checked,software makes "Auto_SP_Imei.bkp" file,which is placed in folder "Auto SP backups".This file consist from first 64 Kb of phone flash and 64 kb of SP area.Using this backup,you can always restore your phone.After backup file reading,software erase SP zone and writes unlocked SP zone partial. 2.Buttons "Read backup" and "Write backup" are for manual backup reading or writing.Manualy readed backups are placed in the folder "Man SP backups". 3.Buttons "Read language" and "Write language" are for phone language packs changing.Readed language packs are saved to folder "Language packs".New language uploading is possible only with language pack from phone with same version and subversion. 4.If checkbox "Auto ON after writing" is checked,then phone can be powered ON after writing operation. ********************************************************************* FLASHER SECTION: 1.Flasher can read/write first 64Kb,2 Mb and 4 Mb of flash.In "Custom" mode is possible to read/write any 64 Kb segment of flash. ********************************************************************* BE4 REPAIR SECTION: BE4 Repair has 2 repairing modes.Please use 1 repair mode,if your phone original flash is not overflashed by other flash. 1.Press button "Read data" and read zone data from phone. 2.Flash phone with good flash with v135K or v136K or same as original and flash type,as it is in the phone. For this go to the "Cloner" section and open your good flash as clone flash.Software will show,what version and flash type has your flash.Check in the "Phone info" window,what flash type is inside your phone(AMD,Fujitsu...).Check box "Change flash type" and select flash type same as it is in the phone.Press button "Auto update" and wait until software will finish phone flashing. 3.Press button "Write data" and write readed before data to the phone. 4.This repairing mode you can use also and for BE5 phones,but must flash phone with same flash as original was. CAUTION:Not works with v124(CF59D320). ---------------------------------------------------------------------- Repairing mode 2 is for phone repairing,if original flash is overflashed.For repairing,flash phone with good v135K or v136K flash, as was described before.After flashing finishing,press button "Disconnect".Put SIM card to the phone and press button "Write zone". After first zone writing,please test phone functionality.If phone not works correctly(can't find card or network and also freezes in menu),put off and again put on battery and again press "Write zone". Write zones one by one,until phone will be fully working. CAUTION:If phone not freezes after bad zone uploading,it possible has not software,but hardware problems. ********************************************************************* IMEI CHANGER SECTION: For direct IMEI changing,press button "Read data" to read zone backup. After this in IMEI editing window write new IMEI(last 15 digit can differs from real IMEI) and press button "Write new IMEI".If you want restore original IMEI,press button "Write data" and write backup to the phone. IMEI zone data are similar to zone data from "Be4 repair" section. ********************************************************************* CLONER SECTION: With cloner you can clone your phone by other flash(upgrade/downgrade versions).For cloning are supported all BE4 and BE5 versions,it means, that you can from BE4 v134 upgrade your phone to v139,or from BE5 v121 upgrade to v124. Cloner has two modes: Auto update and Manual update from backup file. Auto update mode: Connect phone,after open clone flash.Software shows what version and flash type has clone flash.If software allows,select what IMEI you want to have in phone and press button "Auto update".Software reads phone backup file "Phone_IMEI_backup.bkp" file and saves to folder "Phone backups".This backup file is first 64 kb of flash.Using this backup,you can clone your phone again in "Manual update" mode with other flash.After this software recalculates CRC and saves remade flash backup "Auto_IMEI_remade.bin" to folder "Auto remade files". You must use this backup,if software will not finish flash uploading in Auto mode.In this case backup of remade file you must write with flasher in the "Flasher" section. Manual update mode: Everything is same,but phone data is taken from phone backup file. As this backup file you can use all flash file,phone backup file and Auto SP or Man SP backup files.Software makes manual remade file,saves it to folder "Man remade files" and after start phone flashing. In case,if software not finish flashing,remade file please upload with flasher. ********************************************************************* COUNTER: For counter reseting you must double click on image "Alcatel" at the left upper corner of soft.After,counter reseting window must appear.Password is : reset and after this number,which is in win dow "Dongle".Example:If you see in "Dongle" window number "006A",password for counter reseting is : reset006A ********************************************************************* INFO ABOUT FLASHES INCLUDED WITH SOFT: Be4LT-RUclone.bin - flash with RU language and v135 with possibility to change IMEI-use it for repairing with "Loto repair" section. (Please don't rename this flash). --------------------------------------------------------------------- Be4v136LT-RU.bin - flash v136C with RU language-use it for RU language uploading by cloning with "Cloner" section. --------------------------------------------------------------------- Be4v124LT-RU.bin - flash v124 with subversion CF598320 - use it for v124 CF59D320 unlocking by cloning and RU language uploading with "Cloner" section. --------------------------------------------------------------------- Be5_v124_CF598_LT_RU.lng - language partial for RU language uploading to Be5 v124 CF598320 phones(for this phone,you can upload language without cloning). --------------------------------------------------------------------- Be5_v124_CF59D_LT_RU.lng - language partial for RU language uploading to Be5 v124 CF59D320 phones(for this phone,you can upload language without cloning).It have sense only if your phone is without lock,if it is locked you must clone it with Be4v124LT-RU.bin flash,which has RU language inside. ********************************************************************* OTHER INFO: As clone flash you can use anyone flash,not only included with soft. ********************************************************************* IMPORTANT INFO: For begin to work with soft,you must install both Sentinell drivers.
gsmpl.com