Disassembly & Reassembly.pdf

(3732 KB) Pobierz
E:\User Guide\SVC MANUAL\수출 SV...
11. Disassembly and Assembly Instructions
11-1. Disassembly
1
Remove the 'Rear' by unscrewing those 6
points on the picture.
2
With the disassembly JIG unhook the rear
cover
1) SCREW Torque: 1.2 ~ 1.4kgf.cm
1) Make sure not to damage the rear and leave
scratch on it
3 Disconnect the connector of SUB PBA from
the Main PBA and remove the tape
4
Disconnect LCD connector, cable, sensor
connector and the motor.
1) Disconnect the connector of SUB PBA from the
Main PBA and remove the tape
1) Make sure not to damage the connectors and
FPCBs.
11-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
348553157.051.png 348553157.057.png 348553157.058.png 348553157.059.png 348553157.001.png 348553157.002.png
Exploded View and Parts List
5
Disconnect the Key connector at the back of the
PBA
6
Unscrew the screw and disconnect the FPCB
then remove the intenna
1) Make sure not to damage the connector and the
FPCB.
1) SCREW Torque: 1.2 ~ 1.4kgf.cm
7 Open the locker to remove the FPCB.
8 Remove the rubber cap.
1) Make sure not to damagme the FPCB during the process.
1) Make sure not to damage the FPCB when
disassemble the Sidekey FPCB
11-2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
348553157.003.png 348553157.004.png 348553157.005.png 348553157.006.png 348553157.007.png 348553157.008.png 348553157.009.png
Exploded View and Parts List
9 Detach the side key FPCB and lift the sensor
connector to remove the bracket from the 'front'
10
Push the sensor from the behind to detach from
the bracket.
1) Make sure not to damage the LCD connector. 1) Make sure not to damage sensor FPCB.
11 1) Lift the upper side of the LCD with
those two points on the picture to remove
it from the 'front'
2) Open the locker to remove TSP FPCB
12
1) Leave the TSP ass'y in the high
temperature chamber(70℃, 10min) then
remove the TSP from the 'front'
- TSP disassembly procedure. Top → left &
right side → Bottom
1) Make sure not to damage the LCD
1) Make sure not to damage the TSP
11-3
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
348553157.010.png 348553157.011.png 348553157.012.png 348553157.013.png 348553157.014.png 348553157.015.png 348553157.016.png 348553157.017.png 348553157.018.png 348553157.019.png 348553157.020.png 348553157.021.png 348553157.022.png 348553157.023.png 348553157.024.png 348553157.025.png 348553157.026.png 348553157.027.png 348553157.028.png 348553157.029.png 348553157.030.png 348553157.031.png 348553157.032.png 348553157.033.png 348553157.034.png 348553157.035.png 348553157.036.png 348553157.037.png 348553157.038.png 348553157.039.png 348553157.040.png 348553157.041.png 348553157.042.png 348553157.043.png 348553157.044.png 348553157.045.png
Exploded View and Parts List
13
Remove the key pad by unhooking those 4
points on the picture.
14
Remove the KEY FPCB by lifting the bottom
with the tweezers
1) Make sure not to damage the keypad
1) Make sure not to damage the Key FPCB
15
DisconnecttheCameramodulefromthePBA
16
Iron the solder to remove the motor.
(Lead Free : 350~380℃)
1) Make sure not to damage Camera FPCB
1) Make sure not to damage the components around the
motor.
11-4
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
348553157.046.png 348553157.047.png 348553157.048.png 348553157.049.png 348553157.050.png 348553157.052.png
Exploded View and Parts List
17
Disconnect the ear-jack conncetor.
18
Removethosetwoshieldcansonthepicture.
1) Make sure not to damage the ear-jack FPCB
1) Make sure not to damage those shield cans and the
components.
11-5
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
348553157.053.png 348553157.054.png 348553157.055.png 348553157.056.png
Zgłoś jeśli naruszono regulamin