SGH-F210_Disassembly & Reassembly.pdf
(
2855 KB
)
Pobierz
C:\Documents and Settings\최윤선\...
7. Disassembly and Assembly Instructions
7-1.
Disassembly
1
2
※
caution
1. Remove a screw at six points as shown.
1) Be cautious not to damage the rear cover
※
caution
1. Make space between rear cover and front cover
from the lower part of set, by assembly stick.
3
4
1) Be cautious not to damage FPCB and connector
※
caution
1. Remove a hold key and a volume key as
shown.
2. Separate the camera connector
3. Separate the camera from the camera housing.
1) Be cautious not to damage FPCB and connector
※
caution
1. Separate the 3*4 key connector from the board
2. Separate the LCD connector from the board.
7-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Exploded View and Parts List
5
6
1) when removing the screws from camera housing,
be careful not to damage the housing
※
caution
1.Remove the screw at the left and right side of
camera housing
2. Separate the camera housing from PBA.
3. Separate the PBA from the SET.
※
caution
1. Let it open by turning the front to the clockwise.
7
8
※
caution
1. After the front open, pull it down as shown.
2. The swing ASS'Y and the front separate by
pulling the front down.
※
caution
1.Swing the hinge in the counter clockwise
2.Remove the screw sheet at the five points as
shown.
7-2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Exploded View and Parts List
9
10
※
caution
1. Loosen the screw at the five points of lower
case.
※
caution
1. By a assembly stick, separate the lower from
the lower part.
11
12
※
caution
1.Take out the vibration motor from the land.
2.Remove the speaker.
※
caution
1. Remove the sub-PCB from upper.
7-3
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Exploded View and Parts List
13
14
1) When removing bracket, be cautious not to
damage.
※
caution
1.Open the bracket by lifting to the left.
2.Remove the green insulated tape.
1) When removing bracket , be cautious not to
damage FPCB.
※
caution
1. Lift the locker of connector.
2.Separate the wheel key ass'y.
15
16
※
caution
1. Separate the main connector as shown.
※
caution
1. Remove the bond.
2. Separate the motor and speaker after lead is
removed using soldering tool.
7-4
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Exploded View and Parts List
7-2.
Assembly
1
2
※
caution
1. Connect the MAIN FPCB on the LCD ASS'Y.
1) Insert by the shown guide line.
※
caution
1. Insert the wheel key ASS'Y according to guide
line
2. Fix it by locker after inserting connector.
3. Put the tape on the locker to fix locker.
3
4
1) Remove tape
2) Check whether hole of bracket and hole of PCB
are aligned.
※
caution
1. Remove the tape of the bracket.
2. Land wheel key ASS'Y according to PCB hole,
folding sub-PCB.
1)
When speaker is landed, move the wire to the
lowerpartofPCBnottodamage.
2) When motor is landed, be cautious not to insert
wire under the motor.
※
caution
1. Land the speaker at upper part.
2. Land the motor at upper part.
7-5
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Plik z chomika:
misiekyo
Inne pliki z tego folderu:
F210_sm(1).pdf
(5389 KB)
SGH-F210_Disassembly & Reassembly.pdf
(2855 KB)
F210_SM.swf
(2466 KB)
F210_sm.pdf
(5389 KB)
Inne foldery tego chomika:
_E2P, Eeprom
2100
470
600
800
Zgłoś jeśli
naruszono regulamin