CW2006EX-Mill-Turn_data_sheet_web.pdf

(239 KB) Pobierz
CAMWorks 2006EX - Mill/Turn Data Sheet
Mill-Turn
CAMWorks Mill-Turn provides a
programming solution for milling and
turning in the same machine tool. Mill-
turn machines are capable of
performing turning and milling
operations in a single setup that can
reduce part handling and increase
production.
C, Y and B Axis Machining
Machining cycles are available for C,
Y and B axis machining at compound
angles and on the Face, ID and OD of
a part. Supported mill tool axis
motion:
C-Axis OD (OD Free, Wrapped)
• Generates wrapped toolpath on a
cylinder about the turning axis
(Z).
Z and C axes are controlled
simultaneously while tool stays on
centerline of part.
Y-Axis OD (OD Fixed)
• Toolpath is generated on a fixed C
axis position.
• 2½ Axis Milling: tool moves to
depth in X with Y,Z simultaneous
cutting.
• 3 Axis Milling: X,Y,Z simultaneous
cutting.
B Axis OD
• Toolpath is generated on a fixed C
& B axes position.
• 2½ Axis Milling: tool moves to
depth in one axis with
simultaneous cutting in other
axes.
Face Milling (Fixed, Free)
• For 2½ Axis Milling: tool positions
to depth in Z with X,Y
simultaneous or X,C simultaneous
cutting.
Mill Features
• The current Mill features, identified
by Automatic Feature Recognition
(AFR) and defined using Interactive
Feature Recognition (IFR), are
supported for Y axis milling on the
OD and the Face of the part. For
more details on Mill features, see the
CAMWorks 2½ Axis Mill data sheet.
• 3-Axis features can be defined
interactively for Y-axis milling.
Wrapped Features
• Interactively defined Wrapped
features are cylindrical in shape and
are cut by controlling the Z and C
axis.
• Support for wrapped pocket, slot,
boss and open profile features on OD
of the part.
• Wrapped features can be defined by
picking cylindrical edges, faces or
loops from the solid model.
• Wrapped features can also be
defined from 2D sketches by
specifying a wrapping diameter.
• Solid model cylindrical faces or
edges can be unwrapped to 2D
sketches that can be modified and
used to create Wrapped Features.
• Operations performed on Wrapped
features can have user-defined
contain and avoid areas.
Turn Features
Turn features on the OD or ID of the
part, front face and grooves are the
same as the current Turn features
found by AFR or inserted interactively
using IFR. For more details on Turn
features, see the CAMWorks Turning
data sheet.
Operations
• 2½ Axis Milling operations are the
same as the current CAMWorks 2½
Axis Milling including automatic
roughing, finishing, thread milling
and single point (drilling, boring,
reaming, tapping) cycles.
• 3 Axis Milling operations,
supported on the Y axis, are the
same as the current CAMWorks 3
Axis Milling including all Advanced
3 Axis cycles.
• Turning operations are the same as
the current CAMWorks Turning
including automatic roughing,
finishing, grooving, threading,
cutoff and single point (drilling,
boring, reaming and tapping)
cycles.
• Toolpath simulation shows motion
of rotational and linear axes.
Call Your Reseller Today
For more information, call your local
TekSoft reseller.
Scottsdale, AZ USA 85260
www.teksoft.com
TekSoft is a subsidiary of Geometric
Software Solutions Co. Ltd.
414847273.004.png 414847273.005.png 414847273.006.png 414847273.007.png 414847273.001.png 414847273.002.png 414847273.003.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin