S7_for_Windows_Getting_Started.pdf

TECHNOLOGIE TRANSFER

DIPL.-ING. B. P. SCHULZ-HEISE

Getting Started with

S7 for Windows

Version 6.x

S7 for Windows® Training

INGENIEURBÜRO FÜR

Content

The author has created this document to assist users of S7 for Windows ®

Version 6.x. In no way is the author responsible for the completeness or quality of the

information provided. Liability claims regarding damage caused by the use of any

information provided, will not be accepted. Part or all of the pages in the publication

can be edited, altered, in part, or completely deleted by the author without separate

announcement.

The author has not knowingly used any copyrighted material for this publication.

The copyright for any material created by the author is reserved. Any duplication or

use of objects such as diagrams or texts in other printed publications is not permitted

without the author's agreement.

Legal validity of this disclaimer.

This disclaimer is to be regarded as part of the publication which you were supplied

as a customer of S7 for Windows ® Version 6.X. If sections or individual terms of this

statement are not legal or correct, the content or validity of the other parts remain in

force.

Complete training classes available for S5 for Windows ®; S7 for Windows ®; and also

for the Siemens PLC Programming Software Step® 7.

Author:

TTI Ingenieurbüro für

Technologie Transfer

Dipl. Ing. B. Peter Schulz-Heise

Stadtring 207

64720 Michelstadt

Germany

Editor:

Trans Tech International

John Teachout

36 Belmont Road

Suite W22

West Harwich, MA 02671

USA

Tel.: + 1 781 455 6827

Home page: TTIntl.com

Fax: 866 254 5215

E-Mail:

JTD@TTIntl.com

Simatic S5, Step 5, Simatic S7, MicroWin, Step 7, Graph5, S7-200, S7-300, S7-400, MPI, DP, PPI and CP are registered

Windows is a registered trademark of Microsoft Corporation. Excel is a registered trademark of Microsoft Corporation in the

United States and other countries. InTouch® and Wonderware® are registered trademarks of the Wonderware Corporation.

Product names are trademarks of their owners.

S7 for Windows® Training

0BTable of Contents

Page 1

Table of Contents

.............................................................................1

S7 for Windows ® Basics .......................................................1-1

1.1 Opening the S7 for Windows ® Software .................................... 1-1

1.2 S7 for Windows ® Basic Window (Classic Operator interface) . 1-4

Title Bar .....................................................................................................1-5

1.3 Generating a S7 Project ............................................................. 1-10

1.4 Selecting the English Mnemonics............................................. 1-13

1.5 S7 for Windows ® Basic Window (Standard interface) ............ 1-14

Opening the S7 for Windows ® Software .................................................1-14

S7 for Windows Basic ® Window .............................................................1-15

Title Bar ...................................................................................................1-15

Tool Bar – Standard Operator Interface ..................................................1-16

1.6

File (File Menu - PC Block List) ................................................. 1-18

New (New Project)...................................................................................1-19

Save Online Blocks..................................................................................1-19

Restore Online Blocks .............................................................................1-19

Transfer Project to the PLC .....................................................................1-20

Search For ...............................................................................................1-21

Replace....................................................................................................1-22

Compress PLC Memory ..........................................................................1-22

Clear / Reset PLC....................................................................................1-23

Copy from RAM to ROM..........................................................................1-24

PLC State ................................................................................................1-24

Common Information ...............................................................................1-24

Interrupt Stack (I Stack) ...........................................................................1-25

Block Stack (B-Stack) ..............................................................................1-27

L-STACK..................................................................................................1-28

S7 Memory usage....................................................................................1-28

PLC Access Permission ..........................................................................1-29

Memory Card File ....................................................................................1-29

Preferences .............................................................................................1-29

Block View Tab ........................................................................................1-30

Fonts Tab.................................................................................................1-33

Write Protect Tab.....................................................................................1-34

Print..........................................................................................................1-34

Print Settings ...........................................................................................1-36

Page Layout Margins...............................................................................1-37

Font..........................................................................................................1-38

Header .....................................................................................................1-38

Footer ......................................................................................................1-38

S7 for Windows® Training

Page 2

0BTable of Contents

Footer Field abbreviations ...................................................................... 1-38

Connect to the last selected PLC............................................................ 1-39

S7 for Windows ® Online Functions..................................... 2-1

2.1

Connecting the S7 PLC with a PC ...............................................2-1

2.2

Transferring all PLC Blocks of a STEP® 7 Program

to the PLC ......................................................................................2-6

Transferring a STEP® 7 Program to the PLC........................................... 2-6

2.3

Transferring a PLC Program or PLC Blocks to the PC ..............2-7

S7 for Windows ® Tools to Debug a S7 PLC Program ........ 3-1

3.1

Opening a S7 PLC Program saved in a “S7 Project” .................3-1

3.2

Comparing the existing Online and Offline PLC Program.........3-3

Compare Tool ........................................................................................... 3-4

Differences in Code................................................................................... 3-5

3.3

Arranging Window in the Workplace...........................................3-6

3.4

PLC Block Status display.............................................................3-7

Activating the Status ................................................................................. 3-7

Status Display, Statement List (STL) Presentation................................... 3-8

Status Display, Ladder Logic (LAD) Presentation .................................... 3-8

Status Display, Control System Flowchart (CSF) Presentation................ 3-9

S7 for Windows® Training

Chapter 1

S7 for Windows® Basics

Page 1-1

1 S7 for Windows ® Basics

To work with S7 for Windows ® basic skills are necessary.

1.1 Opening the S7 for Windows ® Software

During the installation of S7 for Windows® an icon has been inserted.

Double click the icon “ S7 for Windows ®” to start the programming

system.

Several “tabs” may be displayed at the left as well as at the button of

the S7 for Windows® window. The “Tabs” displayed depend on the

selected windows in the “View” menu.

S7 for Windows® Training

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: