SINAMICS_S_list_manual_07_07.pdf

List Manual 07/2007

SINAMICS S

sinamics s

Foreword

SINAMICS

Parameters

Function Diagrams

SINAMICS S List Manual

Faults and Alarms

Manual

Appendix

List of abbreviations

References

Valid for

Drive

Index

Firmware version

SINAMICS

2.5 SP1

6SL3 097-2AP00-0BP6

07/2007

Safety-related information

This manual contains information that must be observed to ensure your personal safety and to prevent

property damage. Notices referring to your personal safety are highlighted in the manual by a safety alert

symbol; notices referring to property damage only have no safety alert symbol, These notices shown

below are graded according to the level of danger:

Danger

indicates that death or serious injury will result if proper precautions are not taken.

Alarm

indicates that death or serious injury may result if proper precautions are not taken.

Caution

with a safety alert symbol, indicates that minor personal injury may result if proper precautions are not

taken.

Caution

without a safety alert symbol, indicates that property damage may result if proper precautions are not

taken.

Caution

means an undesirable result or state can occur if the corresponding instruction is not followed.

If more than one level of danger exists, the warning notice for the highest level of danger is used. If a warn-

ing notice with a safety alert symbol is to indicate physical injury, the same warning may also contain infor-

mation about damage to property.

Qualified personnel

The associated device/system may only be installed and used in conjunction with this documentation.

Only qualified personnel should be allowed to commission and operate the device/system. For the pur-

pose of the safety information in this documentation, a “qualified person” is someone who is authorized to

energize, ground, and tag equipment, systems, and circuits in accordance with established safety proce-

dures.

Intended use

Please note the following:

Alarm

This equipment is only allowed to be used for the applications described in the catalog and in the technical

description, and only in conjunction with non-Siemens equipment and components recommended by Sie-

mens.

This product can function correctly and safely only if it is transported, stored, set up, and installed correctly,

and operated and maintained as recommended.

Trademarks

All names identified by ® are registered trademarks of the Siemens AG. The remaining trademarks in this

publication may be trademarks whose use by third parties for their own purposes could violate the rights

of the owner.

Liability Disclaimer

The reproduction, transmission or use of this document or its contents

is not permitted without express written authority. Violation of this rule

especially for granting patents or for GM registration.

We have checked that the contents of this document correspond to

the hardware and software described. Nevertheless, we cannot as-

sume responsibility for any deviations that may arise. The data in this

document is regularly checked and the necessary corrections are in-

cluded in subsequent editions.

Siemens AG

Automation & Drives

Postfach 4848

D - 90437 Nuremberg

Germany

Subject to change without prior notice

Siemens Aktiengesellschaft

SINAMICS S List Manual (LH1)

Foreword

SINAMICS Documentation

The SINAMICS documentation is organized in 2 parts:

• General documentation/catalogs

• Manufacturer/service documentation

A current overview of the documentation in the available languages is provided in

the Internet:

http://www.siemens.com/motioncontrol

Follow menu items - "Support" -> "Technical documentation" -> "Overview of

publications".

The Internet version of DOConCD (DOConWEB) is available in the Internet:

http://www.automation.siemens.com/doconweb

Information on the range of training courses and FAQs (Frequently Asked

Questions) are available in the Internet:

http://www.siemens.com/motioncontrol

Follow the menu item "Support".

Usage phases and their tools/documents (as an example)

Table Foreword-1 Usage phases and the available tools/documents

Usage phase

Tools/documents

Orientation

SINAMICS S Sales Documentation

Planning/configuration

SIZER configuration tool

Configuration Manuals, Motors

Decision making/ordering SINAMICS S Catalogs

Installation/assembly • SINAMICS S120 Equipment Manual for Control Units

and Supplementary System Components

• SINAMICS S120 Equipment Manual Power Modules

Booksize

• SINAMICS S120 Equipment Manual Power Modules in

chassis format

• SINAMICS S150 operating instructions

SINAMICS S List Manual (LH1), 07/2007

Foreword-5

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: