189_Calibration.pdf

187/189

True RMS Multimeter

Calibration Manual

PN 1584337

November 2000 Rev.1, 6/02

All product names are trademarks of their respective companies.

LIFETIME LIMITED WARRANTY

Each Fluke 20, 70, 80, 170 and 180 Series DMM will be free from defects in material and workmanship for its lifetime. As

used herein, “lifetime” is defined as seven years after Fluke discontinues manufacturing the product, but the warranty period

shall be at least ten years from the date of purchase. This warranty does not cover fuses, disposable batteries, damage

from neglect, misuse, contamination, alteration, accident or abnormal conditions of operation or handling, including failures

caused by use outside of the product’s specifications, or normal wear and tear of mechanical components. This warranty

covers the original purchaser only and is not transferable.

For ten years from the date of purchase, this warranty also covers the LCD. Thereafter, for the lifetime of the DMM, Fluke

will replace the LCD for a fee based on then current component acquisition costs.

replace or refund the purchase price of a defective product purchased through a Fluke authorized sales outlet and at the

applicable international price. Fluke reserves the right to charge for importation costs of repair/replacement parts if the

product purchased in one country is sent for repair elsewhere.

If the product is defective, contact your nearest Fluke authorized service center to obtain return authorization information,

then send the product to that service center, with a description of the difficulty, postage and insurance prepaid (FOB

Destination). Fluke assumes no risk for damage in transit. Fluke will pay return transportation for product repaired or

replaced in-warranty. Before making any non-warranty repair, Fluke will estimate cost and obtain authorization, then

invoice you for repair and return transportation.

THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR

PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT,

INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING LOSS OF DATA, ARISING FROM ANY

CAUSE OR THEORY. AUTHORIZED RESELLERS ARE NOT AUTHORIZED TO EXTEND ANY DIFFERENT

WARRANTY ON FLUKE’S BEHALF. Since some states do not allow the exclusion or limitation of an implied warranty or

of incidental or consequential damages, this limitation of liability may not apply to you. If any provision of this warranty is

held invalid or unenforceable by a court or other decision-maker of competent jurisdiction, such holding will not affect the

validity or enforceability of any other provision.

Fluke Corporation

Fluke Europe B.V.

P.O. Box 9090

P.O. Box 1186

Everett, WA 98206-9090

5602 BD Eindhoven

U.S.A.

The Netherlands

2/02

To establish original ownership and prove date of purchase, please complete and return the registration card

accompanying the product, or register your product on http://www.fluke.com . Fluke will, at its option, repair at no charge,

Table of Contents

Title

Page

Introduction ....................................................................................................... 1

Contacting Fluke ............................................................................................... 1

Precautions and Safety Information .................................................................. 2

International Symbols........................................................................................ 2

Safety Information............................................................................................. 3

Specifications .................................................................................................... 4

Accuracy ....................................................................................................... 4

Feature Summary .......................................................................................... 4

Basic Specifications .......................................................................................... 5

Detailed Accuracy Specifications ..................................................................... 6

Frequency Counter Sensitivity .......................................................................... 9

Burden Voltage (A, mA, µA) ............................................................................ 9

Input Characteristics.......................................................................................... 9

Required Equipment.......................................................................................... 10

Basic Maintenance ............................................................................................ 11

Opening the Meter Case................................................................................ 11

Removing and Reinserting the Circuit Board Assembly .............................. 11

Replacing the LCD........................................................................................ 12

Reassembling the Meter Case ....................................................................... 13

Testing Fuses (F1 and F2)............................................................................. 13

Replacing Fuses ............................................................................................ 14

Replacing the Batteries ................................................................................. 14

Cleaning ........................................................................................................ 15

Performance Tests ............................................................................................. 16

Testing the Display ....................................................................................... 16

Backlight Test ............................................................................................... 16

Current Terminal Sensing Test ..................................................................... 16

Keypad Test .................................................................................................. 17

Verification of the IR Communication Port.................................................. 17

Testing Temperature ..................................................................................... 17

Testing Voltage, Current, Resistance, Capacitance and Diode Functions.... 18

Calibration ......................................................................................................... 21

Keypad Interface ........................................................................................... 21

General Procedure......................................................................................... 22

Special Requirements.................................................................................... 23

Calibration Inputs.......................................................................................... 23

187/189

Calibration Manual

Remote Interface ........................................................................................... 25

Temperature Calibration ............................................................................... 25

Setup ......................................................................................................... 25

Procedure .................................................................................................. 26

Re-Programming Serial Number or Model Number ..................................... 26

Parts and Accessories ........................................................................................ 27

List of Tables

Table

Title

Page

International Symbols ............................................................................................ 2

Required Tools and Equipment ............................................................................. 10

Temperature Test Input and Display ..................................................................... 17

Performance Test Steps ......................................................................................... 18

Calibration Inputs .................................................................................................. 23

iii

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: