DSC_W35_L2_V1.1.PDF

DSC-W35

SERVICE MANUAL

LEVEL 2

US Model

Canadian Model

AEP Model

UK Model

E Model

Australian Model

Hong Kong Model

Chinese Model

Korea Model

Argentine Model

Brazilian Model

Japanese Model

Ver 1.1 2007.03

Revision History

How to use

Acrobat Reader

Internal memory

ON BOARD

Link

SPECIFICATIONS

BLOCK DIAGRAMS

PRINTED WIRING BOARDS

SERVICE NOTE

FRAME SCHEMATIC DIAGRAM

REPAIR PARTS LIST

DISASSEMBLY

SCHEMATIC DIAGRAMS

• Precaution on Replacing the SY-175 Board

The components identified by

mark 0 or dotted line with

mark 0 are critical for safety.

Replace only with part num-

ber specified.

Les composants identifiés par une

marque 0 sont critiques pour la

sécurité.

Ne les remplacer que par une pièce

portant le numéro spécifié.

DIGITAL STILL CAMERA

DSC-W35_L2

2007C0800-1

Published by Kohda TEC

9-852-152-32

Sony EMCS Co.

Link

SPECIFICATIONS

Camera

[Power, general]

Power: Rechargeable battery pack NP-BG1, 3.6 V

AC-LS5K AC Adaptor (not supplied), 4.2 V

Power consumption (during shooting with the

LCD screen on):

1.0 W

Operating temperature: 0 to 40

[System]

Image device: 7.20 mm (1/2.5 type) color CCD,

Primary color filter

Total pixel number of camera:

Approx. 7 410 000 pixels

Effective pixel number of camera:

Approx. 7 201 000 pixels

Lens: Carl Zeiss Vario-Tessar 3

C (32 to 104

Storage temperature: –20 to +60

C (–4 to +140

Dimensions:

89.8

zoom lens f =

6.3 – 18.9 mm (38 – 114 mm when converted

to a 35 mm still camera) F2.8 –5.2

Exposure control: Automatic exposure, Scene

Selection (7 modes)

White balance:Automatic, Daylight, Cloudy,

Fluorescent, Incandescent, Flash

File format (DCF compliant):

Still images: Exif Ver. 2.21 JPEG compliant,

DPOF compatible

Movies: MPEG1 compliant (Monaural)

Recording media:Internal Memory (approx.

56 MB), “Memory Stick Duo”

Flash: Flash range (ISO sensitivity

(Recommended Exposure Index) set to Auto):

approx. 0.2 to 3.9 m (7 7/8 inches to 12 feet

9 5/8 inches) (W)/approx. 0.3 to 2.0 m (11 7/8

inches to 6 feet 6 3/4 inches) (T)

[Input and Output connectors]

A/V OUT jack: Minijack

Video, Audio (Monaural)

USB jack: mini-B

USB communication: Hi-Speed USB (USB 2.0

compliant)

[LCD screen]

LCD panel: 5.1 cm (2.0 type) TFT drive

Total number of dots: 84 960 (354

29/32

inches) (W/H/D, excluding protrusions)

Mass:

Approx. 149 g (5.3 oz) (including NP-BG1

battery pack and wrist strap, Etc.)

Microphone: Monaural

Speaker: Monaural

Exif Print: Compatible

PRINT Image Matching III: Compatible

PictBridge: Compatible

59.1

22.9 mm (3 5/8

2 3/8

BC-CSG/BC-CSGB/BC-CSGC

battery charger

Power requirements: AC 100 to 240 V, 50/60 Hz,

2 W (BC-CSG/BC-CSGC) 2.6 W (BC-CSGB)

Output voltage: DC 4.2 V, 0.25 A

Operating temperature: 0 to 40

C (32 to 104

Storage temperature: –20 to +60

C (–4 to +140

Dimensions: Approx. 62

91 mm (2 1/2

3 5/8 inches) (W/H/D)

Mass: Approx. 75 g (2.7 oz)

Rechargeable battery pack NP-BG1

Used battery: Lithium-ion battery

Maximum voltage: DC 4.2 V

Nominal voltage: DC 3.6 V

Capacity: 3.4 Wh (960 mAh)

240) dots

Design and specifications are subject to change

without notice.

DSC-W35_L2

— 2 —

31/32

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

SAFETY-RELATED COMPONENT WARNING!!

ATTENTION AU COMPOSANT AYANT RAPPORT

À LA SÉCURITÉ!

LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES

DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT

CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE

REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY

DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU

DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.

COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH

MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS

LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE

COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS

APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS

PUBLISHED BY SONY.

SAFETY CHECK-OUT

After correcting the original service problem, perform the following

safety checks before releasing the set to the customer.

1. Check the area of your repair for unsoldered or poorly-soldered

connections. Check the entire board surface for solder splashes

and bridges.

2. Check the interboard wiring to ensure that no wires are

"pinched" or contact high-wattage resistors.

3. Look for unauthorized replacement parts, particularly

transistors, that were installed during a previous repair. Point

them out to the customer and recommend their replacement.

4. Look for parts which, through functioning, show obvious signs

of deterioration. Point them out to the customer and

recommend their replacement.

5. Check the B+ voltage to see it is at the values specified.

6. FLEXIBLE Circuit Board Repairing

• Keep the temperature of the soldering iron around 270°C

during repairing.

• Do not touch the soldering iron on the same conductor of the

circuit board (within 3 times).

• Be careful not to apply force on the conductor when soldering

or unsoldering.

Unleaded solder

Boards requiring use of unleaded solder are printed with the lead-

free mark (LF) indicating the solder contains no lead.

(Caution: Some printed circuit boards may not come printed with

the lead free mark due to their particular size.)

: LEAD FREE MARK

Unleaded solder has the following characteristics.

• Unleaded solder melts at a temperature about 40°C higher than

ordinary solder.

Ordinary soldering irons can be used but the iron tip has to be

applied to the solder joint for a slightly longer time.

Soldering irons using a temperature regulator should be set to

about 350°C.

Caution: The printed pattern (copper foil) may peel away if the

heated tip is applied for too long, so be careful!

• Strong viscosity

Unleaded solder is more viscous (sticky, less prone to flow) than

ordinary solder so use caution not to let solder bridges occur such

as on IC pins, etc.

• Usable with ordinary solder

It is best to use only unleaded solder but unleaded solder may

also be added to ordinary solder.

DSC-W35_L2

— 3 —

TABLE OF CONTENTS

Section

Title

P a ge

1. SERVICE NOTE

1-1. Description on Self-diagnosis Display ···························· 1-1

1-2. Process After Fixing Flash Error ····································· 1-1

1-3. Method for Copying or Erasing the Data in Internal

Memory ··········································································· 1-2

1-4. Precaution on Replacing the SY-175 Board ···················· 1-3

2. DISASSEMBLY

2-1. Disassembly ····································································· 2-2

2-2. Exchange Method of Barrier Assy ·································· 2-6

2-3. Exchange Method of Zoom Motor Unit ·························· 2-9

3. BLOCK DIAGRAMS

3-1. Overall Block Diagram (1/2) ··········································· 3-1

3-2. Overall Block Diagram (2/2) ··········································· 3-2

3-3. Power Block Diagram ····················································· 3-3

4. PRINTED WIRING BOARDS AND

SCHEMATIC DIAGRAMS

4-1. Frame Schematic Diagram ·············································· 4-1

4-2. Schematic Diagrams ························································ 4-3

4-3. Printed Wiring Boards ··················································· 4-16

4-4. Mounted Parts Location ················································ 4-25

5. REPAIR PARTS LIST

5-1. Exploded Views ······························································· 5-2

5-2. Electrical Parts List ························································· 5-6

DSC-W35_L2

— 4 —

1. SERVICE NOTE

1-1. DESCRIPTION ON SELF-DIAGNOSIS DISPLAY

Self-diagnosis display

• C: ss: ss

You can reverse the camera

malfunction yourself. (However,

contact your Sony dealer or local

authorized Sony service facility

when you cannot recover from the

camera malfunction.)

• E: ss: ss

Contact your Sony dealer or local

authorized Sony service facility.

Display Code

C:32:ss

Countermeasure

Turn the power off and on again.

Format the “Memory Stick” or internal

memory.

Cause

Trouble with hardware.

“Memory Stick” or internal memory is

unformatted.

Caution Display During Error

SYSTEM ERROR

FORMAT ERROR

C:13:ss

Insert a new “Memory Stick”.

“Memory Stick” is broken.

MEMORY STICK ERROR

Turn the power off and on again.

Trouble with internal memory.

INTERNAL MEMORY ERROR

E:61:ss

Checking of lens drive circuit.

When failed in the focus and zoom

initialization.

—

E:91:ss

Checking of flash unit or replacement

of flash unit. (Note)

Abnormality when flash is being

charged.

Note: After repair, be sure to perform “1-2. PROCESS AFTER FIXING FLASH ERROR”.

1-2. PROCESS AFTER FIXING FLASH ERROR

When “FLASH error” (Self-diagnosis Code E : 91 : ** ) occurs, to prevent any abnormal situation caused by high voltage, setting of the

flash is changed automatically to disabling charge and flash setting.

After fixing, this setting needs to be deactivated. Flash error code can be initialized by the operations on the Setup screen.

Method for Initializing the Flash Error Code

Initialize

Initializes the setting to the default setting.

Images stored in the internal memory are retained.

1 Select [OK] with v on the control button, then press z.

The message “Initialize all settings Ready?” appears.

2 Select [OK] with v, then press z.

The settings are reset to the default setting.

To cancel the resetting

Select [Cancel] in step

, then press z.

• Make sure that the power is not disconnected during resetting.

DSC-W35_L2

1-1

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: