Micromechatronics - K. Uchino, J. Giniewicz (Marcel Dekker, 2003) WW(1).pdf - Najnowsze ksiazki(42) - walbo48

Micromechatronics

Kenji Uchino

International Center for Actuators and Transducers (ICAT)

The Pennsylvania State University

University Park, Pennsylvania, U.S.A.

Jayne R. Giniewicz

Indiana University of Pennsylvania

Indiana, Pennsylvania, U.S.A.

MARCEL DEKKER, INC.

NEW YORK • BASEL

Marcel Dekker, Inc., and the author make no warranty with regard to the accom-

panying software, its accuracy, or its suitability for any purpose other than as de-

scribed in the preface. This software is licensed solely on an "as is" basis. The only

warranty made with respect to the accompanying software is that the CD-ROM

medium on which the software is recorded is free of defects. Marcel Dekker, Inc., will

replace a CD-ROM found to be defective if such defect is not attributable to misuse by

the purchaser or his agent. The defective CD-ROM must be returned within 10 days to:

Customer Service, Marcel Dekker, Inc., P.O. Box 5005, Cimarron Road, Monticello,

NY 12701, (914) 796-1919.

Comments regarding the software may be addressed to the author, Kenji Uchino, 134 Mat.

Res. Lab., Perm State University, University Park, PA 16802 or keniiitchi>io(a;,psu.edu.

Library of Congress Cataloging-in-Publication Data

A catalog record for this book is available from the Library of Congress.

ISBN: 0-8247-4109-9

This book is printed on acid-free paper.

Headquarters

Marcel Dekker, Inc.

270 Madison Avenue, New York, NY 10016, U.S.A.

tel: 212-696-9000; fax: 212-685-4540

Eastern Hemisphere Distribution

Marcel Dekker AG

Hutgasse 4, Postfach 812, CH-4001 Basel, Switzerland

tel: 41-61-260-6300; fax: 41-61-260-6333

World Wide Web

http://www.dekker.com

The publisher offers discounts on this book when ordered in bulk quantities. For more infor-

mation, write to Special Sales/Professional Marketing at the headquarters address above.

Neither this book nor any part may be reproduced or transmitted in any form or by any

means, electronic or mechanical, including photocopying, microfilming, and recording, or

by any information storage and retrieval system, without permission in writing from the

publisher.

Current printing (last digit):

10 987654321

PRINTED IN THE UNITED STATES OF AMERICA

MATERIALS ENGINEERING

1. Modern Ceramic Engineering: Properties, Processing, and Use in De-

sign: Second Edition, Revised and Expanded, David W. Richerson

2. Introduction to Engineering Materials: Behavior, Properties, and

Selection, G. T. Murray

3. Rapidly Solidified Alloys: Processes . Structures . Applications, edited

by Howard H. Liebermann

4. Fiber and Whisker Reinforced Ceramics for Structural Applications,

David Belitskus

5. Thermal Analysis of Materials, Robert F. Speyer

6. Friction and Wear of Ceramics, edited by Said Jahanmir

1. Mechanical Properties of Metallic Composites, edited by Shojiro

Ochiai

8. Chemical Processing of Ceramics, edited by Burtrand I. Lee and

Edward J. A. Pope

9. Handbook of Advanced Materials Testing, edited by Nicholas P.

Cheremisinoff and Paul N. Cheremisinoff

10. Ceramic Processing and Sintering, M. N. Rahaman

11. Composites Engineering Handbook, edited by P. K. Mallick

12. Porosity of Ceramics, Roy I/I/. Rice

13. Intermetallic and Ceramic Coatings, edited by Narendra B. Dahotre

and T. S. Sudarshan

14. Adhesion Promotion Techniques: Technological Applications, edited

byK. L. MittalandA. Pizzi

15. Impurities in Engineering Materials: Impact, Reliability, and Control,

edited by Clyde L. Briant

16. Ferroelectric Devices, Ken// Uchino

17. Mechanical Properties of Ceramics and Composites: Grain and Par-

ticle Effects, Roy W. Rice

18. Solid Lubrication Fundamentals and Applications, Kazuhisa Miyoshi

19. Modeling for Casting and Solidification Processing, edited by Kuang-

O (Oscar) Yu

20. Ceramic Fabrication Technology, Roy W. Rice

21. Coatings of Polymers and Plastics, edited by Rose A. Ryntz and Phil-

ip V. Yaneff

22. Micromechatronics, Ken// Uchino and Jayne R. Giniewicz

23. Ceramic Processing and Sintering: Second Edition, Mohamed N.

Rahaman

Additional Volumes in Preparation

Handbook of Metallurgical Process Design, edited by George E. Totten,

Kiyoshi Funatani, and Lin Xie

Micromechatronics - K. Uchino, J. Giniewicz (Marcel Dekker, 2003) WW(1).pdf

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: