Connection System SmartWire EASY223-SWIRE 01_07 AWB2528+1251-1589GB Moeller.pdf

(1357 KB) Pobierz
untitled
Connection
System
SmartWire
EASY223-SWIRE
Hardware, Engineering,
Function Description
01/07 AWB2528+1251-1589GB
647050746.003.png 647050746.004.png
All brand and product names are trademarks or registered
trademarks of the owner concerned.
1 st published 2007, edition date 01/07
© Moeller GmbH, 53105 Bonn
Author: Arno Dielmann
Editor: Thomas Kracht
Translator: David Long
All rights reserved, including those of the translation.
No part of this manual may be reproduced in any form
(printed, photocopy, microfilm or any other process) or
processed, duplicated or distributed by means of electronic
systems without written permission of Moeller GmbH, Bonn.
Subject to alteration without notice.
647050746.005.png
Warning!
Dangerous electrical voltage!
Before commencing the installation
• Disconnect the power supply of the device.
• Ensure that devices cannot be accidentally
restarted.
• Verify isolation from the supply.
• Earth and short circuit.
• Cover or enclose neighbouring units that
are live.
• Follow the engineering instructions (AWA)
of the device concerned.
• Only suitably qualified personnel in
accordance with EN 50110-1/-2
(VDE 0105 Part 100) may work on this
device/system.
• Before installation and before touching
the device ensure that you are free of
electrostatic charge.
• The functional earth (FE) must be
connected to the protective earth (PE) or
to the potential equalisation. The system
installer is responsible for implementing
this connection.
• Connecting cables and signal lines should
be installed so that inductive or capacitive
interference does not impair the
automation functions.
• Install automation devices and related
operating elements in such a way that they
are well protected against unintentional
operation.
• Suitable safety hardware and software
measures should be implemented for the
I/O interface so that a line or wire breakage
on the signal side does not result in
undefined states in the automation
devices.
• Ensure a reliable electrical isolation of the
low voltage for the 24 volt supply. Only
use power supply units complying with
IEC 60364-4-41 (VDE 0100 Part 410) or
HD 384.4.41 S2.
• Deviations of the mains voltage from the
rated value must not exceed the tolerance
limits given in the specifications, otherwise
this may cause malfunction and dangerous
operation.
•Emergency stop devices complying with
IEC/EN 60204-1 must be effective in all
operating modes of the automation
devices. Unlatching the emergency-stop
devices must not cause restart.
• Devices that are designed for mounting in
housings or control cabinets must only be
operated and controlled after they have
been installed with the housing closed.
Desktop or portable units must only be
operated and controlled in enclosed
housings.
I
647050746.006.png
• Measures should be taken to ensure the
proper restart of programs interrupted
after a voltage dip or failure. This should
not cause dangerous operating states even
for a short time. If necessary, emergency-
stop devices should be implemented.
• Wherever faults in the automation system
may cause damage to persons or property,
external measures must be implemented to
ensure a safe operating state in the event
of a fault or malfunction (for example, by
means of separate limit switches,
mechanical interlocks etc.).
II
647050746.001.png
01/07 AWB2528+1251-1589GB
Contents
About this manual
3
Intended users
3
–easyNet user
3
– CANopen user
3
Additional device manuals
4
References
5
Device designations
6
Reading conventions
7
1 About the SmartWire gateway
EASY223-SWIRE
9
Overview System SmartWire
10
–SWIRE-DIL
10
– SmartWire-I/O module
10
–SWIRE-PF
11
– SmartWire connection cable
11
Design of the gateway EASY223-SWIRE
13
Function
14
Preconditions for the use of the gateway
15
– Hardware and operating system
preconditions
15
– Software requirements
15
– Improper use
15
2 Installation
17
Installation in the easyNet network
17
Installation in the CAN network
18
– Node address (Node-ID) setting
18
Connect SmartWire connection cable
20
Connect supply voltages
21
– Gateway
22
– AUX
22
– Potential Relationship between the
Components
23
1
647050746.002.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin