IntelliBox-IO_QS.pdf

INTELLIBOX-I/O 2100

IntelliBox-I/O 2100 Quick Start Guide

900-476 Rev. A 03/07

INTELLIBOX-I/O 2100

QUICK START GUIDE CONTENTS

What’s In the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Pinouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3

Quick Connect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

INTELLIBOX-I/O 2100

IP Addressing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Quick Setup Using DeviceInstaller GUI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-10

Configuration Using Web Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-11

LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Quick Start Guide

IntelliBox-I/O 2100

The IntelliBox-I/O 2100 industrial automation device server provides a quick and easy

method to network-enable multiple industrial automation devices and equipment.

Multiple serial ports, digital I/O’s and a relay enable real-time access for remote

configuring, programming, monitoring, and control of PLCs, motor drives, process

controls, power monitoring equipment, barcode scanners, or virtually any RS232, RS422,

or RS485 factory floor device.

IntelliBox-I/O 2100 incorporates EventTrak ™ technology to monitor and track events and

activity on the attached equipment and to respond with user-defined actions. With the

automated reporting feature, the IntelliBox queries attached devices at specified times

to gather information, send notifications, and take pre-emptive actions.

WHAT'S IN THE BOX

In addition to the IntelliBox, the box contains the following items:

PART #

PINOUTS CONTINUED

Serial 2 Pinouts

Pin #

Pin Name

Description

TX2+ /

4-Wire: TX2+; Output from IntelliBox

(+)

2-Wire: (+)

TX2- /

4-Wire: TX2-; Output from IntelliBox

(-)

2-Wire: (-)

GND

Ground

RX2+ /

4-Wire: RX2+; Input to IntelliBox

DNU

2-Wire: Do not use, leave open

RX2- /

4-Wire: RX2-; Input to IntelliBox

COMPONENT DESCRIPTION

DNU

2-Wire: Do not use, leave open

CD-IBIO-01

CD-ROM containing the User Guide, software utilities,

Quick Start Guide and tutorial

Terminal Block Power Connector

The front of the IntelliBox has a terminal block screw connector for attaching

to an appropriate power source, such as those used in automation and

manufacturing industries. The terminal block connector supports a power

range from 9 to 30 VDC or 9 to 24 VAC.

500-172-R

DB9F to 3.5 mm, 7-Position Screw Terminal Plug, RoHS

520-091-R

Power supply-worldwide, 12 VDC, 0.9A wall adapter

PINOUTS

Serial Connectors

Serial 1 Pinouts

Pin #

Pin Name

Description

Power Input Port Pin Assignments

DSR1

CTS1

Pin #

Pin Name

Description

RXD1

PWRIN+

Power Input, positive contact

GND

Ground

PWRIN-

Power Input, negative contact

TXD1

Out

GND

Earth Ground

RTS1

Out

DTR1

Out

WWW.LANTRONIX.COM

Quick Start Guide

IntelliBox-I/O 2100

QUICK CONNECT

Complete the following steps in order.

IP ADDRESSING

Your unit must have a unique IP address on your network. The IP address can be

assigned automatically, or you can assign it manually.

DHCP

Many networks use an automatic method of assigning an IP address called

DHCP. If you are unsure whether your network uses DHCP, check with your

systems administrator.

The IntelliBox looks for a DHCP server when it first powers up. You can use the

DeviceInstaller graphical user interface to search the network if your unit has been

assigned an IP by the DHCP server. If the IntelliBox does not acquire an IP, or you do not

use DHCP, you must assign a fixed IP address using Serial 1 (Line 1) of the IntelliBox.

FIXED IP ADDRESS

In most installations, a fixed IP address is desirable. The systems administrator

generally provides the IP address.

The IP address must be within a valid range, unique to your network, and in the

same subnet as your PC. You will need the following information before you set

up the unit as described in this Quick Start Guide.

1. Connect a serial device to your unit.

2. Connect an Ethernet cable to the RJ45 port.

3. Supply power to your unit.

4. Supply power to the serial device.

IP Address:

___ ___ ___ ___

Subnet Mask:

___ ___ ___ ___

Gateway:

___ ___ ___ ___

The following section describes assigning an IP address using DeviceInstaller.

Note: For detailed instructions on assigning the IP address using Serial 1 ( Line 1), please

see the User Guide or the IntelliBox Video Tutorial on the CD or the Lantronix web site.

WWW.LANTRONIX.COM

Quick Start Guide

IntelliBox-I/O 2100

QUICK SETUP USING DEVICEINSTALLER GUI

Step 1: Install DeviceInstaller

To use the DeviceInstaller utility, first install it from the product CD.

USING DEVICEINSTALLER GUI CONTINUED…

Note: If the unit already has an IP address (e.g., DHCP has assigned an IP address),

click the Search icon and select the unit from the list of Lantronix device servers

on the local network .

1. Insert the product CD into your CD-ROM drive.

2. If the CD does not launch automatically:

a) Click the Start button on the Task Bar and select Run .

b) Enter your CD drive letter, colon, backslash, Launch.exe (e.g., D:\Launch.exe ).

2. Click the Assign IP icon .

3. If prompted, enter the hardware address (on the product label) and click Next .

3. Click the DeviceInstaller button.

4. Respond to the installation wizard prompts.

(When prompted to select an installation type, select Typical .)

Note: For more information about DeviceInstaller, see the DeviceInstaller online Help.

Step 2: Configure Network Settings

To assign an IP address manually:

1. Click Start

DeviceInstaller .

If your PC has more than one network adapter, a message displays. Select an

adapter and click OK .

➜

Programs

➜

Lantronix

➜

DeviceInstaller

➜

4. Select Assign a specific IP address and click Next .

5. Enter the IP address . The Subnet mask displays automatically based on the IP

address; if desired, you may change it. On a local network, you can leave the

Default gateway blank (all zeros). Click Next .

WWW.LANTRONIX.COM

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: