TL-WA501G_instrukcja.pdf
(
971 KB
)
Pobierz
Assign a static IP address
(192.168.1.100) for your
computer. Please refer to
T3
in
Troubleshooting
guide on page
10 if you need assistance.
Note
You may need to write down the original settings as a backup.
Connect your computer to the
Access Point with the Ethernet
cable or wirelessly. The default
SSID of the Access Point is
TP-LINK_xxxxxx. The xxxxxx is
the last 6 characters of the
Access Point’s MAC address.
Plug the provided power
adapter into the power jack on
the back of the Access Point,
and the other end to a standard
electrical wall socket.
1
Turn on all of your network devices and then check to see if the LEDs on the
Access Point display normally as the diagram bleow describes.
Solid light
Flashing
Solid light or flashing
Flashing if the Wireless
Radio function is enabled
If the LEDs display abnormally, please check to see if all the cable
connectors (power adapter and Ethernet cable) are well connected to your
device.
Note
Login
Open your web browser
and type in
192.168.1.1
in
the address bar and press
Enter
.
2
A dialog box will prompt you for
the
Username
and
Password
.
Enter the default values and click
OK
.
Username
ǖ
admin
Password
ǖ
admin
Click
OK
If the dialog box does not pop up, please refer to
T3
in the
Troubleshooting
guide on page 10.
T2
will give you some help if you forget the password.
Note
Network Setting
After successfully logging in, this
page will then display.
If connecting the TL-WA501G with
an existing network, please set a
suitable
LAN IP
address
and
Gateway
for the device.
Click
Network
Click
Save
after you
have completed these
settings
Note
If the LAN IP address has been changed, please use the new IP address to
login.
3
Operation Mode Selection
The TL-WA501G provides five operational modes: Access Point mode, Repeater
mode, Client mode, Point-to-Point Bridge mode, and Point to Multi-Point Bridge
mode. Please choose an appropriate operation mode for the Access Point.
Access Point Mode
In this mode, the Access Point will act as a wireless central hub for your wireless
LAN clients, giving a wireless extension for your current wired network.
Repeater Mode
In this mode, the Access Point can extend the coverage of another wireless Access
Point or Router. The universal repeater mode is for the wireless Access Point or
Router which does not support WDS function.
Client Mode
In this mode, the Access Point will act as a wireless card to connect with WISP or
Wireless Router.
4
Bridge Mode
In this mode, the Access Point can wirelessly connect two or more remote LANs
together.
Operation Mode Setting
To choose the
Operation
Mode
, please click
Wireless
.
Click
Wireless Mode
Choose the
Operation Mode
appropriate to your needs.
If
Access Point mode
is selected,
please proceed to part
A;
If
Repeater Mode
is sele
cted,
please skip to part
B
;
If
Client mode
is selected, please
skip to part
C
;
If
Bridge mode
is selected, please
skip to part
D
.
5
Plik z chomika:
jimasek
Inne pliki z tego folderu:
TL-WA501G_instrukcja_instalacji.pdf
(1090 KB)
20104235180311.zip
(987 KB)
TL-WA501G_instrukcja.pdf
(971 KB)
TL-WA501G-01.jpg
(357 KB)
TL-WA501G-02.jpg
(279 KB)
Inne foldery tego chomika:
Archer AX11000
Archer AX6000
Archer AX72
Archer AX73
Archer AX90
Zgłoś jeśli
naruszono regulamin