Firmware.pdf

(1334 KB) Pobierz
648661467 UNPDF
Firmware update
4. Firmware update
4-1 Product reset
■ This describes how to reset the camera to factory default setting.
1. First turn on the power of the camera.
Fig. 4-1
2. Press the q WIDE button + DOWN button and then turn the w POWER off.
Fig. 4-2
3. Turn the power of the camera on again to check whether it has been reset.
Fig. 4-3
SAMSUNG
This Document can not be used without Samsung’s authorization
4-1
648661467.020.png 648661467.021.png 648661467.022.png 648661467.023.png 648661467.001.png 648661467.002.png 648661467.003.png
Firmware update
4-2 Version check
■ This describes how to check the version of the current irmware of the camera.
1. Use fully charged batteries for power.
2. First turn off the power of the camera.
3. Press the q SHUTTER button + DOWN button, and then turn the w POWER on.
Fig. 4-4
4. Check the version of the irmware and then turn the power off.
Fig. 4-5
4-2
This Document can not be used without Samsung's authorization
SAMSUNG
648661467.004.png 648661467.005.png 648661467.006.png 648661467.007.png 648661467.008.png
Firmware update
4-3 Upgrade
♦ How to execute the irmware
The irmware is conigured in the following structure.
Code area is where the execution codes to operate the camera are located, and the Partition [1:3] area is where the various resources
necessary to operate the camera are saved. Among these areas, Partition 3 area is where the Defective Pixel adjustment data and
Lens Shading adjustment data are saved.
User Area is where the setting values are saved through the menu when the user uses the camera, and the adjusted data through
integrated process is saved.
<Table 4-1>
code
partition1
partition2
partition3
User Area
► Reference of general version:
- As the version to update the Code + Partition [1:2] area, this protects both the adjusted data saved in the User Area and
the Partition 3 area.
1. Insert the SD card containing the irmware data ile and Upgrade Script ile into the camera.
* You need two iles to upgrade the FW and the required iles are FW data ile and Upgrade Script ile.
* Because all data saved on the FLASH memory will be reset when you upgrade the irmware, back up
your data before proceeding with the upgrade.
2. Use the AC adaptor or fully charged batteries for the power.
* You can proceed with the upgrade only when the battery level is full (Icon showing full up to 3rd level).
3. Turn on the power of the camera.
Fig. 4-6
4. The version of the FW to upgrade will be displayed on the LCD screen. When you press the SHUTTER button,
the FW upgrade will start.
Fig. 4-7
SAMSUNG
This Document can not be used without Samsung’s authorization
4-3
648661467.009.png 648661467.010.png 648661467.011.png 648661467.012.png 648661467.013.png
Firmware update
5. The progress of the FIRMWARE upgrade will be displayed on the LCD and the upgrade will proceed.
Fig. 4-8
6. When the upgrade is completed, the camera will automatically be turned off.
4-4
This Document can not be used without Samsung's authorization
SAMSUNG
648661467.014.png 648661467.015.png
Firmware update
4-4 Full upgrade
♦ How to execute the FULL irmware
The irmware is conigured in the following structure.
Code area is where the execution codes to operate the camera are located, and the Partition [1:3] area is where the various resources neces
sary to operate the camera are saved. Among these areas, Partition 3 area is where the Defective Pixel adjustment data and Lens Shading
adjustment data are saved.
User Area is where the setting values are saved through the menu when the user uses the camera, and the adjusted data through integrated
process is saved.
<Table 4-2>
code
partition1
partition2
partition3
User Area
► Reference of FULL version:
- As the version to update the Code + Partition [1:3] area, this protects the adjusted data saved in the User Area but resets the Defective
Pixel adjustment data and Lens Shading adjustment data. Therefore, you must recover the to previously adjusted data by readjusting
or by backing up the adjusted data.
- When executing a FULL version upgrade, the adjusted data will automatically be saved to the SD card and you
can upload the adjusted data back to the camera by referring to the following detail method.
- Adjusted data automatically saved to the SD card is composed of 3 files; LSCLUTO.BIN, DefectivePixel0.bin
and DefectivePixel1.bin.
1. Insert the SD card containing the FULL FW data file and Upgrade Script file into the camera.
* You need two files for FULL FW upgrade and the required files are FULL FW data file and Upgrade Script file.
* Because all data saved on the FLASH memory will be reset when you upgrade the firmware, back up your data before proceeding with the
upgrade.
2. Use the AC adaptor or fully charged batteries for the power.
- You can proceed with the upgrade only when the battery level is full (Icon showing full up to 3rd level).
3. Turn on the power of the camera.
Fig. 4-9
SAMSUNG
This Document can not be used without Samsung’s authorization
4-5
648661467.016.png 648661467.017.png 648661467.018.png 648661467.019.png
Zgłoś jeśli naruszono regulamin