Firmware.pdf

Firmware update

4. Firmware update

4-1 Product reset

 This describes how to reset the camera to factory default setting.

1. Remove the memory card from the camera.

2. Connect the AC adapter or a fully charged battery.

3. Turn off the power of the camera.

4. While pressing the TELE button and OK button press the PLAY button for about one second. (POWER ON)

Fig. 4-1

4-1

This Document can not be used without Samsung digital imaging

SAMSUNG

Firmware update

5. The camera is powered on and the firmware version is displayed on the LCD screen.

Fig. 4-2

SAMSUNG

This Document can not be used without Samsung digital imaging

4-2

Firmware update

4-2 Upgrading the Firmware

1. Insert the SD card containing the firmware file into the camera.

* Updating the firmware will delete all the data in the Flash memory. Be sure to back up all the data onto your

PC before updating the firmware. The firmware file name is always "D123.elf".

2. Connect the AC adapter or a fully charged battery.

* To upgrade the firmware, the battery level indicator on the LCD monitor must be full.

3. Turn off the power of the camera.

4. While pressing the WIDE button and OK button press the PLAY button for about one second. (POWER ON)

Fig. 4-3

5. The firmware is upgraded with blinking the LED (Green).

After completing the upgrade, the camera is turned off automatically.

6. Turn on the camera and do the 'Reset' menu in the Setup menu.

4-3

This Document can not be used without Samsung digital imaging

SAMSUNG

Firmware update

MEMO

SAMSUNG

This Document can not be used without Samsung digital imaging

4-4