GettingStarted_e.pdf

English

SIMATIC Sensors

RFID-Systems

RF600

Getting Started

Edition 11/2005; J31069-D0172-U001-A1-7618

Safety Guidelines

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

Danger

indicates that death or severe personal injury will result if proper precautions are not taken.

Warning

indicates that death or severe personal injury may result if proper precautions are not taken.

Caution

with a safety alert symbol, indicates that minor personal injury can result if proper precautions are not taken.

Caution

without a safety alert symbol, indicates that property damage can result if proper precautions are not taken.

Notice

indicates that an unintended result or situation can occur if the corresponding information is not taken into

account.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The device/system may only be set up and used in conjunction with this documentation. Commissioning and

operation of a device/system may only be performed by qualified personnel. Within the context of the safety notes

in this documentation qualified persons are defined as persons who are authorized to commission, ground and

label devices, systems and circuits in accordance with established safety practices and standards.

Prescribed Usage

Note the following:

Warning

This device may only be used for the applications described in the catalog or the technical description and only in

connection with devices or components from other manufacturers which have been approved or recommended by

Siemens. Correct, reliable operation of the product requires proper transport, storage, positioning and assembly

as well as careful operation and maintenance.

Trademarks

All names identified by ® are registered trademarks of the Siemens AG. The remaining trademarks in this

publication may be trademarks whose use by third parties for their own purposes could violate the rights of the

owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

Siemens AG

Automation and Drives

Postfach 48 48

90437 NÜRNBERG

GERMANY

Edition 11/2005

Technical data subject to change

Table of contents

1 Getting Started........................................................................................................................... 1-1

1.1 Introduction........................................................................................................................... 1-1

1.2 Safety information................................................................................................................. 1-1

1.3 Hardware and software requirements.................................................................................... 1-2

1.4 Design of the RF660R reader................................................................................................ 1-3

1.5 Status displays...................................................................................................................... 1-4

1.6 Connection of hardware components..................................................................................... 1-5

1.7 Installing Software................................................................................................................. 1-6

1.8 Parameterizing the RF660R.................................................................................................. 1-7

1.9 Testing the RF600R............................................................................................................ 1-14

1.10 Documentation and software............................................................................................... 1-15

1.11 Service & support................................................................................................................ 1-16

1.12 Contact partner................................................................................................................... 1-16

1.13 Training............................................................................................................................... 1-17

Tables

Table 1-1

Order Nos.:........................................................................................................................... 1-2

RF600

Getting Started, Edition 11/2005; J31069-D0172-U001-A1-7618

iii

Getting Started

1.1

Introduction

This documentation guides you step-by-step to fast initial start-up of the RF660R reader.

This includes the following steps:

1. Connecting the HW components of reader, PC and antenna

2. Installing the configuration software for the reader

3. Parameterizing the Reader

Preconfigured profile files are provided:

4. Testing the function of the reader (recognizing a tag)

1.2

Safety information

Caution

Please observe the safety instructions on the back cover of this documentation.

SIMATIC RFID products comply with the salient safety specifications to IEC, VDE, EN, UL

and CSA. If you have questions about the admissibility of the installation in the designated

environment, please contact your service representative.

Caution

Alterations to the devices are not permitted.

Failure to observe this requirement shall constitute a revocation of the radio equipment

approval, CE approval and manufacturer's warranty.

RF600

Getting Started, Edition 11/2005; J31069-D0172-U001-A1-7618

1-1

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: