DuoDiscus.pdf

precision cardmodels

Duo Discus T - The cardmodel

This kit is a scale model of the Duo Discus T callsign D-KPBB as it is flown in Hamburg-Boberg

(www.hac-boberg.de). It consists of 5 pages for the parts. Four should be printed on

160 g/m² document paper, the one carrying the connectors has to be printed on 90gr normal

printer paper. The instructions are just 3 pages of graphics plus this page.

Features of this kit:

Build it with or without gear. All outlines are faded gray. Thus they do not

disturb the nice white finish. You can even try to use glossy paper for photo prints, haven't

tried that before.

Tips for building :

This is not a model for beginners. The instructions are brief and you should be used to

tube and gluetab style fuselages. Some parts may be omitted, e.g. the wing ribs as the wings

are really thin.

Strengthen the middle section of the spar by soaking it in CA (superglue). The wing

spars have triangles on their top which point towards the front of the glider. The formers of

the fuselage (parts 2b to 11b) and the spars for the ruder and elevator (14a, 16c) are just

doubled on the same cardstock. Page 2 provides a guide to get the dihedrals of the wing

sections correct. The wheels are made of layers of cardboard, then filed round and painted black.

*Add a towing plane, e.g. the PZL Wilga by GPM.

*Make lots of them and make the "Thermal mobilé".

*160 gr/m² document paper available at Staples from 'Rey today'.

*Build it and share your experiences with me. Send email to jmueller@uni-bremen.de

Happy building!

Jan Müller

support

of spar

precision cardmodels

5b front

support

of spar

10b

11b

15cm