04_11_08_hp_integrity_rx2620_2_server_ordering_and_configuration_guides.pdf

HP Integrity rx2620-2 Server Ordering and

Configuration guides

Launch date 11/8/04

Note: This is an interim document. The information will be incorporated into the 12/1/04 online update of the

HP 9000 Ordering and Configuration Guides.

HP Integrity rx2620-2 Server Ordering and Configuration Guides

HP Integrity rx2620-2 Server

Note : This information can also be found in QuickSpecs at:

http://h18000.www1.hp.com/products/quickspecs/11716_div/11716_div.HTML

Table 1 HP Integrity rx2620-2 Specifications

Server Model Number

rx2620-2

Maximum Network Interface Cards – see supported I/O table

Server Product Numbers 2

1000Base-SX

Model rx2620 Base System with no CPUs. System

AB459A

1000Base-TX

includes core I/O and one power supply. Memory,

10/100Base-TX

CPUs and Storage must be purchased separately.

Dual-port X.25

Model rx2620 base system with one 1.6-GHz/3-MB

AB332A

4-port 10/100Base-TX

CPU (200-MHz system bus, 400 MT/s). System

includes

PCI-X dual-port GigE-TX

one CPU, core I/O, and one power supply.

PCI-X dual-port GigE-SX

Model rx2620 base system with one 1.3-GHz/3-MB

AB333A

Electrical Characteristics

CPU (200-MHz system bus, 400 MT/s). System

includes

one CPU, core I/O, and one power supply

AC Input power

100-240V 50/60 Hz

1 included, 2 nd for N+1

Hot swap Power supplies

Redundant AC power inputs

1 included, 2 nd for N+1

Current requirements at 230V

4 A (shared across inputs)

Typical maximum power dissipation

600 Watts

Supported Processors

Theoretical maximum power dissipation

1,350 Watts

1.3-GHz Intel® Itanium 2® processor

kW rating for UPS loading

1.3

Cache

3 MB

Typical Heat dissipation (BTUs/hour)

1,945

Floating-point Coprocessor included

Yes

Maximum Heat dissipation (BTUs/hour)

4,375

1.6-GHz Intel® Itanium 2® processor

Cache

3 MB

Site Preparation

Floating Point Coprocessor included

Yes

Site planning and installation included

Rack depth (mm/inches)

680 mm/26.8 in

System Memory

Rack width (mm/inches)

482 mm/19 in

Minimum memory

1 GB

Rack height (EIA/mm/inches)

2U/ 86 mm/3.4 in

Maximum memory capacity

24 GB

Pedestal depth (mm/inches)

672 mm/26.5 in

Pedestal width (mm/inches)

297 mm/ 11.7 in

Internal Disks

Pedestal height (mm/inches)

494 mm/ 19.5 in

Maximum disk mechanisms

Weight (kg/lbs) Max.

25 kg/56 lbs

Maximum disk capacity

438 GB

Environmental Characteristics

Standard Integrated I/O

Acoustics (operator/bystander) at 25

<6.8 Bels LwA

Ultra320 SCSI – LVD

2 channels

Operating Temperature (up to 5000 ft) 1

to +35

10/100/1000Base-T (RJ-45 connector)

2 port

Non-operating Temperature

–40

to +70

degrees C

RS-232 serial ports

Maximum rate of temperature change

C/hour

10/100Base-T management port (RJ-45 connector)

Yes

Operating relative humidity

15% to 80% RH non-cond.

VGA graphics

Optional

Non-operating relative humidity

8% to 85% non-condensing

USB

Operating altitude above sea level

3000 m (10000 ft) max

Non-operating altitude above sea level

4600 m (15000 ft) max

I/O Buses and Slots

Total PCI-X/PCI Slots

Regulatory Compliance

All four slots are 133-MHz, 64-bit slots on dedicated PCI-X buses

RMN

RSVLA-0403

Electromagnetic

Complies with FCC Rules and Regulations, Part 15

Maximum Mass Storage Host Bus Adapters – see supported I/O table

interference

as a Class A digital device. Manufacturer’s

Ultra160 SCSI – LVD

Declaration to EN55022 Level A, VCCI Registered,

Dual-port Ultra160 SCSI – LVD

Class A, Korea RLL, CCC, BMSI Taiwan

Smart Array Ultra160 SCSI RAID

3 (only 1 for

Safety

CSA NRTL Certified, EN 60950-1

internal

drives)

HP Integrity rx2620-2 Server Ordering and Configuration Guides

Internal and Channel Partner Use Only – Launch date 11/08/04

HP Integrity rx2620-2 Server Ordering and Configuration Guides

2-Gb single-port fibre channel

Maximum operating temperature range up to 5000 feet. For higher altitudes, de-rate the maximum temperature by 2°C/1000 feet above 5000 feet.

Two power cords are shipped with each system; one connects the system to the rack PDU and one enables connection to a wall socket. Localized cords are included

at the Distribution center.

Overview

Figure 1 HP Integrity rx2620-2 System Overview (Front View)

Optional Management

Processor Card

Intel ® Itanium 2 ® CPUs

Hot Swap Fans

DVD-ROM

4 PCI-X I/O Slots

12 DDR Memory DIMMS

Hot Swap Power

Supplies

Hot Plug Disk Drives

HP Integrity rx2620-2 Server Ordering and Configuration Guides

Internal and Channel Partner Use Only – Launch date 11/08/04

HP Integrity rx2620-2 Server Ordering and Configuration Guides

Figure 2 HP Integrity rx2620-2 System Architecture

Intel ®

Itanium 2 ®

Intel ®

Itanium 2 ®

6.4 GB/s

zx1

mio

4.25 GB/s

4.0 GB/s

zx1

ioa

zx1

ioa

zx1

ioa

zx1

ioa

zx1

ioa

zx1

ioa

zx1

ioa

Optional Core management: 10/100Base-T, VGA, RS-232

PCI-X 133 (1 GB/s)

Core I/O: 2xU320 SCSI, 2x10/100/1000Base-T

PCI-X 133 (0.5 GB/s)

IDE (removable media), USB

PCI-X 133 (0.5 GB/s)

Features

Table 2 HP Integrity rx2620-2 Features

Minimum System

• One 64-bit Intel® Itanium 2® CPU: Either 1.3-GHz/3.0-MB cache (200-MHz system bus, 400MT/s) or

1.6-GHz/3-MB cache (200-MHz system bus, 400 MT/s)

• 1-GB PC2100 ECC Registered DDR266A SDRAM (4×256MB DIMMs)

• One power supply

Maximum Server Capacities

• Two 64-bit Intel® Itanium 2® CPUs: Either 1.3-GHz/3.0-MB cache (200-MHz system bus, 400 MT/s) or

1.6-GHz/3-MB cache (200-MHz system bus, 400 MT/s)

• 24-GB PC2100 ECC Registered DDR266A SDRAM (12×2GB DIMMs)

• Two Hot swap power supplies, providing N+1 protection for power supplies and power input

• Four PCI-X/PCI IO adapter cards

• One internal DVD ROM or CD-RW/DVD-ROM combo drive

• Three internal hot-plug LVD SCSI disks

Standard System Features

• Three Operating System support: HP-UX 11i version 2, Windows Server 2003 Enterprise Edition, and Linux

Note: OpenVMS will be available in Q1 calendar year 2005.

• Dual-channel Ultra320 SCSI controller, 2 internal disks on one channel, 1 internal disk on a second channel

• External Ultra320 SCSI port

• Two ports 10/100/1000Base-TX LAN (auto speed sensing, RJ-45 connector)

• Optional Management Processor for remote management and HA monitoring

• Telnet and web console via 10/100Base-TX management LAN (RJ-45 connector)

• Two general purpose RS-232 serial ports

• Three RS-232 serial ports linked to the management processor (multiplexed from a single DB-25 port)

• Factory integration of CPUs, memory, disk drives, removable media, and I/O cards

• Rackmountable into 19-inch cabinets

• Optional stand-alone pedestal mount

HP Integrity rx2620-2 Server Ordering and Configuration Guides

Internal and Channel Partner Use Only – Launch date 11/08/04

HP Integrity rx2620-2 Server Ordering and Configuration Guides

• One-year warranty with next business day on-site

High Availability

• N+1 Hot swap cooling

• One Hot swap power supply standard–optional second hot swap power supply for N+1 protection

• On-line memory page deallocation

• ECC protected DDR memory

• Memory chip spare to overcome single DRAM chip failures

• Dynamic Processor resilience and deallocation

• UPS power management

• Hot Plug internal disks

• Two independent Ultra SCSI channels to internal disks for mirroring across disks and channels

• Journal file system for HP-UX

• Auto reboot

• HP MC/ServiceGuard for HP-UX

• Microsoft Windows Cluster Service

• HP ServiceGuard Extension for RAC for HP-UX

• ServiceGuard Manager for HP-UX

• Insight Manager 7—proactive fault management

• EMS HA Monitors for HP-UX

• ECM Toolkit for HP-UX

• HP Surestore AutoPath for HP-UX

• MirrorDisk for HP-UX

Security

• Separate LAN for system management

• Password protection on console port

• Disablement of remote console ports

• SSL encryption on web console

Manageability

• HP Ignite-UX for installation and deployment of the operating system

• HP Software Distributor-UX for software and patch management

• HP Servicecontrol Suite for HP-UX

• HP System Insight Manager (SIM) for Windows and Linux

• Management processor for comprehensive remote management of HP-UX, Windows, and Linux

• Optional Integrated Lights-Out (iLO) Advanced Pack activation key and license

• Process Resource Manager for HP-UX workload management

Configuration

CPU Configuration

The HP Integrity rx2620-2 is a symmetrical multiprocessing (SMP) server supporting up to two

high-performance 64-bit Itanium 2 processors. Processor speeds cannot be mixed within the same system.

Processor Details

• 1.3-GHz with 3.0-MB Level 3 Cache

• 1.6-GHz with 3.0-MB Level 3 Cache

All processors support:

• Level 2 Cache: 256 KB

• Level 1 Cache: 32 KB

• 200-MHz System Bus (400 MT/s)

• Single-bit cache error correction

• 50-bit physical addressing

• 64-bit virtual addressing

• 4 GB maximum page size

HP Integrity rx2620-2 Server Ordering and Configuration Guides

Internal and Channel Partner Use Only – Launch date 11/08/04

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: