Erotic book - BDSM - fetish - bondage tutorial podręcznik ogólny.pdf - MisticMagic

Japan Rope

Tutorial 1 / The Wrist Tie

Here it is, the single biggest secret to Japanese style

rope bondage -- no, it's not the beautiful girl (or guy.)

It's the loop. Double your rope, creating a loop in the

very center. If you're working with a 10m length, as

we are here, this will give you a doubled piece of rope

approximately 5m (about 15ft) to work with. This

"knot" is often called a lark's head - though it really

isn't unless you then pass the working end(s) through

the bight (the looped part) after it's been passed

through a ring, or around a pole. Think of luggage

tags, and you get the picture.

Have your subject place their wrists together, and

start wrapping with the working end of the rope. The

looped end here is in the left hand, and the working

end in the right.

Note: it doesn't really matter which end you wrap

with, but one advantage of doing it this way is that you

can measure out how much of the "bight" end is left

over. This helps leave you with a knot with a loop later

that is just the right size. This extra bit of careful tying

doesn't make a whit of difference with this basic tie,

but when you build more complex ones from this ... it

will.

After wrapping the working end around the wrists

two or three times, catch the final turn with the looped

bight.

Next, take the bight underneath the turns above the

wrists.

A simple knot completes the process. With hemp, this

will hold without problem - with a synthetic rope, you

might have to tie a square knot.

Here's our finished project. There are actually many

different ways to do this basic tie -- and no absolutely

right way to do it.

Tutorial 2 / Simple Breast Tie

Start by doubling a twenty-five or thirty foot length of

rope. Wrap around the top of the breasts once.

Catch this in the back with a lark's head knot.

Erotic book - BDSM - fetish - bondage tutorial podręcznik ogólny.pdf