Cruiser R1200CL.pdf

Cruiser + R 1200 CL

Where with tools

or small items?

Answer: Tool-Box C!

Better throttle response

and power? See our

PerformanceController!

Protection? See our

selection of various

sized screens.

See things in

a different light:

Additional lights.

Note:

Unless stated otherwise,

products fit all the

following 850 and

1200cc Cruiser models:

Only the best:

WILBERS suspension units

for C + CL.

Put your foot down:

Massive Billet aluminium

floorboards.

Cruise in style: Give your

bike the exclusive RIZOMA

beauty treatment.

Classic,

Independent,

Montauk and

Avantgarde.

339

Cruiser + R 1200 CL

Z-Rail

This grab rail and back rest can be used when an original

Comfort rear seat is ﬁtted. The original fold away passenger

seat (not supplied) is ﬁtted to provide a backrest (with

adjustable position) for the passenger. This top quality part

is made of strong cast aluminium and then highly polished.

Comes with an original emblem and ﬁtting kit.

For R 850/1200 C (all models with fitted “Comfort”

seat).

Part-No.: 8180011

“C-Back” Rail + Carrier

The tiny and foldable original rear seat of the Cruiser looks

good, but is not what many would consider a comfortable

seat. Therefore BMW have the option of the “Comfort” seat.

When ﬁtting an original BMW Comfort rear seat this rail

can be ﬁtted to provide a backrest and grab rail for the

passenger. The original BMW folding rear seat/backrest (not

supplied) which is no longer in use when ﬁtting the Comfort

seat, is ﬁtted to provide a backrest for the passenger. The

overall appearance of the Cruiser is enhanced by the C Back,

and the passenger has a nice backrest to lean against. Addi-

tionally, there are two types of rear carriers available (order

separately), “Plain” and “Rounded”. Both are chromed and

bolt on to the C Back Rail to provide additional space for

luggage such as the rear carrier bag (see Touring + Bags).

The “C Back” can be used together with the original side

cases. Made of strong steel tubes and chromed.

For R 850/1200 C (all models with fitted “Comfort”

seat).

C Back Rail

Part-No.: 8160401

Rear Carrier for C Back Rail

“Rounded”

Part-No.: 8160455

“Plain”

Part-No.: 8160460

Rear Carrier “plain”

Rear Carrier “rounded”

“Classic” Crash Bars

What BMW has created with the Cruiser + CL are unique

and special looking custom bikes. The massive chromed

“Renegade” crashbars not only protect the bike in case of a

fall (which we “tested” ourselves – crashbar suffered scuffed

chrome, rider’s ego dented but the bike itself was ﬁne), but

they also ﬁt very well with the “Custom” style of the bike.

And in true freeway cruising style, the rider can rest his feet

on the tubes. Made of massive 38 mm steel tubes with a top

quality chrome ﬁnish. Very well made and exact, easy ﬁtting.

Removal of cylinder covers still possible. Service can be

performed with the bars ﬁtted.

Cruiser Crashbar

The large diameter of the crashbars blend in well with the

header pipes and compliment the styling of the “C”.

For 850/1200 C

Part-No.: 8160257

CL Crashbar

Makes the overall appearance of the CL even more impres-

sive. Tubes follow the lines of the side fairing.

For R 1200 CL

Part-No.: 8160249

R 1200 CL

R 850/1200 C

340

Cruiser + R 1200 CL

Speedster Screen

The Speedster is a stylish little screen which is perfectly

matched to the Cruiser’s design. The screen may be small

in size, but because of the low seating position it provides

noticeable wind protection. The screen is easily ﬁxed to the

bike with two unobtrusive chromed steel brackets above the

headlamp. ABE approved.

For all R 1200 C (not for Montauk 97 – 2002 models)

Part-No.: 8180001

Z-Shield

These screens are in the classic Cruiser-Style. They are ad-

justable for height, and come in two different versions, Low

Body and Glide Body. The Low Body is the smaller screen

which still provides good protection, and the Glide Body is

the tall screen for the whole upper body, ideal for touring.

Both screens need ﬁtting kits (order separately) which have

indicator relocating kits included. Additionally they can be

ﬁtted with the “Wide Chrome” cover kit that further en-

hances the “Cruiser Look” (The pictures other than the “Low

Body” show screens ﬁtted with the kit). These are quality

chromed parts that cover the screen brackets.

For R 850/1200 C (not with additional lights other than

Z-Spots page F12). Please order a screen and a fitting

kit separately.

Low Body Screen

Low Body Screen Part-No.: 8180004

Fitting Kit * Part-No.: 8180005

* Fitting Kit For Z Shields (needed for both screens)

Glide Body Screen

Glide Body Screen Part-No.: 8180002

Fitting Kit * Part-No.: 8180005

* Fitting Kit For Z Shields (needed for both screens)

Wide Chrome Kit (optional)

Part-No.: 8180007

Glide Body Screen Low Body Screen Wide Chrome Kit

Windshield Speedster CL

The original cruiser screen has a unique shape which is not

to everyone’s taste. Especially while cornering, the higher

side parts can irritate the rider. This screens operates on

the principle of “less is more”. This screen offers good wind

protection without disturbing cornering sight. The radical

looking Speedster screen is cut to a 220 mm height (original

screen = 343 in the middle + 155 mm extra for the side

“ears”). It is suited to riders who like the looks of a screen

but still like to feel the wind in their face (in warm climates

the extra cooling of the upper body is an advantage). The

screen is made of 5 mm thick material with a “Shadow” tint.

TÜV approved.

For R 1200 CL

Part-No.: 8180024

Custom Shield

Many Cruiser riders would like to have some wind protection

without totally changing the appearance of the Cruiser. We

have just the right screen to fulﬁl these requirements, the

“smoked” coloured Custom Shield provides good protection

and stylish looks. It is 50 cm tall + 42 cm wide and uses

chromed steel brackets to mount to the handle bar clamps

(not suitable with handle bar risers). An edge protector is

included. ABE approved.

For R 850/1200 C (only “Classic”).

Part-No.: 8110310

341

Cruiser + R 1200 CL

Cruiser Plate

The Cruiser has a low ground clearance, even riding down

the pavement can cause the underside to suffer. This laser

cut stainless steel plate offers needed protection for the oil

sump, oil ﬁlter and engine, but is hardly noticeable. Easy to

attach, also compatible with crashbars. Fitting kit included.

For R 850/1200 C + CL.

Part-No.: 8160380

Extenda Fender

The rear section of the front mudguard is not long enough

to effectively keep road debris off the exhaust and front of

the engine. Especially with the Cruiser with it’s chromed

parts this is annoying and causes unnecessary cleaning and

polishing. The mudguard extender solves this problem ef-

fectively and elegantly.. The original painted mudguard does

not need to be modiﬁed, the extender is simply glued to the

mudguard with silicone. Made of tough ABS plastic.

For R 850/1200 C

Part-No.: 8110100

Tank + Paint Protection “Venture Shield”

Venture Shield

A ﬂexible and indestructible plastic protection foil that was

originally designed to protect propeller and rotor blades

from stone damage. Speed-of-sound aircraft application to

protect your BMW! This almost invisible foil protects the

paint from stones, sand, bugs and any other ﬂying object

that may cause scuffs, scratches or abrasive marks as well

as accidental marks from tools, keys and other day to day

objects that might come close to the bike. As any damage

to the paint is detrimental to the resale value of a bike it is

important to keep it in a good as possible condition, so the

investment is worth considering. The foil absorbs most of

the impact energy, it makes sense to ﬁt the head light foil

as well. It is UV resistant, but lets UV rays shine through

so that there are no differences in the colour of the paint

between protected and non protected areas of the bike. Each

piece is custom made and cut to an exact shape for a perfect

ﬁt. The foil clings very well, but can be removed quite easily.

Bike can be cleaned as before (even steam cleaned). The kit

comes complete with cleaning ﬂuid, tools and everything

that is needed and can easily be ﬁtted by anyone with a bit

of patience (see ﬁtting pictures in “Accessories” section).

Available in several versions such as tank sets or complete

sets or the “Universal” foil, a single 20 x 30 cm foil, cut and

use wherever else needed.

For additional fitting

instructions and pictures see

the Venture Shield page

in our “Accessories”

section.

Universal foil (20 x 30 cm) Part-No.: 1250455

R 1200 C:

3 piece Tank set consists of 2 foils for sides and one for the

top. Complete set consists of a tank set plus foils for the

head lamp, forks and mudguard.

Tank Set

Part-No.: 1250460

Tearproof foil

Complete Set

Part-No.: 1250465

R 1200 CL:

Tank set consists of 3 pieces: 2 foils for sides and one for

the top, and complete set has additionally foils for fairing

top and bottom, side cases, head lamps and front mudguard.

Tank Set

Part-No.: 1250390

Complete Set

Part-No.: 1250395

342

Cruiser + R 1200 CL

Z-Tip

These heavy duty chrome parts are the crowning glory for

the front mudguard of the “C”. They are very easy to ﬁt and

protect the tips of the mudguard. Sold as a set for both front

mudguard ends. Fitting does not require modiﬁcation of

mudguard.

For R 850/1200 C (not Montauk).

Part-No.: 8180012

Front Mudguard Rail

This mudguard rail gives the front of the bike a massive

presence. It protects the front mudguard and allows ﬁtting

of small luggage such as a tool bag onto it (see our leather

Tool Bag further on in this section). Made of strong steel

tubes with a top quality chromed surface, it attaches to the

lower fork bridge. Easy to ﬁt.

For all R 850/1200 C (not Montauk).

Part-No.: 8160228

CL Sidestand Enlarger

The CL is by no means a lightweight. Parked on a loose

surface or soft tarmac on a hot day the bike is liable to fall

over. This two piece enlarger increases the surface area by

almost 100 % and provides the CL with a sturdy platform.

CNC machined from Aluminium and then lovingly polished, it

“sandwiches” the original side stand plate. Not only practical

but it looks great too. One of the popular customising parts

available for the R 1200 CL.

R 1200 CL

Part-No.: 8500041

Tank Pad Kit

Tank pads effectively protect the tank from scratches and

damage. The two-piece kits are each made speciﬁcally for

the tanks of the C and CL to provide a good ﬁt. The centre

pad ensures no damage to the tank from zippers or belts.

Soft, black plastic material, self adhesive. Easy to ﬁt.

For all 850/1200 C + R 1200 CL

Part-No.: 1250081

Chrome Horn

A classically styled chrome horn with a massive and

beautifully machined billet aluminium bracket. The horn is

chromed, and the bracket is polished to a chrome-like ﬁnish.

It replaces the original black horn and looks more like a part

worthy of the Cruiser or CL. All required parts are included.

Easy to ﬁt.

For all R 850/1200 C and CL

Part-No.: 8160255

343

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: