eMac(2).pdf

Service Source

eMac

updated 15 January 2004

updated 15 January 2004

eMac -

Service Source

Take Apart

eMac

Tools

The following tools are recommended for the take apart procedures.

• 2.5 mm hex (for rear housing)

• phillips #2 screwdriver

• jeweler’s screwdriver set

• needlenose pliers

• ESD wriststrap and mat

• CRT discharge tool

Note:

Do not use a power driver on the rear housing screws.

Tools

eMac Take Apart -

CRT Neck/Display/Analog

Assembly Handling Information

Handling

It is imperative that proper handling and packaging guidelines be followed

when working with the display/analog assembly.

Do NOT lift, handle, bump, or manipulate the CRT neck/neck board (see red arrows

below) on the Display/Analog assembly. Modules damaged by mishandling are NOT

covered by Apple Warranty. Apple Authorized Service Providers can be liable for broken

CRT necks due to improper handling.

: The metal chassis has sharp edges, you may want to wear gloves when

handling the assembly. Lift the assembly from the metal chassis; never lift the assembly

from the neck. I

Packing a Defective Display/Analog Assembly

The packing procedure is included with the replacement display/analog assembly.

Incorrect packaging can result in damaged eMac displays. Please read and follow the

directions enclosed in the shipping box of the new display prior to packaging the defective

assembly. AASPs can be liable for broken CRT necks due to improper packing and

handling.

eMac Take Apart

CRT Neck/Display/Analog Assembly Handling Infor-

Important:

Caution