Classic Dart (sample).pdf

(185 KB) Pobierz
Classic Dart
Classic Dart
This plane is the classic schoolyard dart. It has short, compact wings and will fly
straight as an arrow. It generally needs some up elevator along the back wing edges to
fly properly.
Orient the template with the “UP” arrow at the top of the page.
Then, flip the paper over onto its backside, so that you cannot
see any of the fold lines.
Pull the top right corner down toward you until fold line 1 is
visible and crease along the dotted line. Repeat with the top left
corner.
Fold the top point down toward you until fold line 2 is visible
and crease along the dotted line.
9
250827898.010.png 250827898.011.png 250827898.012.png 250827898.013.png
Fold the top left and top right corners down and toward you and
crease along fold lines 3.
Fold the tip up and over the two diagonal folds along fold
line 4 to secure them in place.
Flip the plane over and fold the right side over onto the left
side as shown along fold line 5 so that the outside edges of the
wings line up. Also make sure the diagonal folds do not
become untucked from the tip you folded up in the previous
step.
Fold the wings down along fold lines 6 and the winglets up
along fold lines 7. Add wing dihedral by tilting the wings
up slightly away from the fuselage. The wings will have a
slight “V” shape when viewed from the front. Cut two slits,
one inch apart, along the back edge of each wing to make
elevator adjustments. Start out by trying some up-elevator.
You are ready to fly!
10
250827898.001.png 250827898.002.png 250827898.003.png 250827898.004.png
UP
6
5
6
7
7
250827898.005.png 250827898.006.png 250827898.007.png 250827898.008.png 250827898.009.png
Zgłoś jeśli naruszono regulamin