mig_Win_e.pdf

Table of Contents

Converting ProTool Projects

SIMATIC HMI

Global Settings

Configuration Support for

Migrators

Migration to Windows-

based Systems

PLC Drivers

Tags

Messages

Screen Objects

Standard Screens

Function Keys

Events

Functions

PLC Jobs

Recipes

Index

Issue 12/01

This manual is a component of "How to configure W indows-based systems": 6AV6594-1MA06-0AB0

Safety Guidelines

This manual contains notices which you should observe to ensure your own personal safety, as well as

to protect the product and connected equipment. These notices are marked as follows according to the

level of danger:

Danger

indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Warning

indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Caution

used with the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may

result in minor or moderate injury.

Caution

used without safety alert symbol indicates a potentially hazardous situation which, if not avoided, may

result in property damage.

Attention

indicates that unwanted events or status can occur if the relevant information is not observed.

Note

draws your attention to particularly important information on the product, handling the product, or to a

particular part of the documentation.

Qualified Personnel

Equipment may be commissioned and operated only by qualified personnel . Qualified personnel

within the meaning of the safety notices in this manual are persons who are authorized to commission,

ground and identify equipment, systems and circuits in accordance with safety engeneering standards.

Correct Usage

Note the following:

Warning

The equipment may be used only for the applications stipulated in the catalog and in the technical

description and only in conjunction with other equipment and components recommended or approved

by Siemens.

Startup must not take place until it is established that the machine, which is to accommodate this

component, is in conformity with the guideline 98/37 ECC.

Faultless and safe operation of the product presupposes proper transportation, proper storage, erection

and installation as well as careful operation and maintenance.

Trademarks

The registered trademarks of the Siemens AG can be found in the preface. The remaining trademarks

in this publication may be trademarks, whose use by third parties for their own purposes could violate

the rights of the owner.

Impressum

Editor and Publisher: A&D PT1 D1

Exclusion of liability

The transmission and reproduction of this documentation and the exploitation and

communication of its contents are not allowed, unless expressly granted. Violators are

patent or registration by GM.

We have checked the content of this publication for compliance with the described

hard and software. However, discrepancies cannot be excluded, with the result that

we assume no guarantee for total compliance. The information in this publication is

checked regularly, and any necessary corrections are included in the following

editions. We would be grateful for any suggestions for improvement.

Siemens AG

Bereich Automation & Drives

Geschäftsgebiet SIMATIC HMI

Postfach 4848, D-90327 Nuernberg

Siemens AG 2001

Technical data subject to change.

Siemens Aktiengesellschaft

Order number A5E00136681

Contents

Converting ProTool Projects............................................................ 1-1

1.1

Convertible Projects ............................................................................ 1-2

1.2

How to convert a Project ..................................................................... 1-4

Global Settings................................................................................. .2-1

2.1

How to make Settings in the Control Panel.......................................... 2-3

2.2

How to configure a Buffer Overflow Message ...................................... 2-4

2.3

How to convert the Interface Area ....................................................... 2-5

2.4

How to evaluate the Keyboard Operation ............................................ 2-7

PLC Drivers....................................................................................... .3-1

3.1

How to convert a Project for the SIMATIC-S5-DP PLC ........................ 3-3

3.2

How to convert a Project with the SIMATIC-S5-FAP PLC .................... 3-4

3.3

Note the following for the SIMATIC S5-AS511..................................... 3-5

3.4

How to convert a Project with two SIMATIC S7-200 PLCs ................... 3-6

Tags

.......................................................................................... .4-1

Messages .......................................................................................... .5-1

Screen Objects .................................................................................. 6-1

6.1

Text Fields .......................................................................................... 6-2

6.2

Input/Output Fields and Text or Graphic Lists ...................................... 6-3

6.3

How to convert the Date/Time Display................................................. 6-5

6.4

Buttons ............................................................................................... 6-7

6.5

Graphics and Character Graphics ....................................................... 6-8

6.6

Bars and Trend Graphics .................................................................. 6-10

Standard Screens.............................................................................. 7-1

7.1

Post-processing ProTool Standard Screens ........................................ 7-2

7.2

Post-processing ProAgent Standard Screens ...................................... 7-5

Function Keys .................................................................................. .8-1

Events

.......................................................................................... .9-1

Functions ........................................................................................ .10-1

10.1

Example: Switching between the Event Message Buffer Display

and the Event Message Page Display ............................................ . 10-11

PLC Jobs ........................................................................................ .11-1

11.1

Replacing PLC Jobs by Functions ..................................................... 11-5

Recipes

........................................................................................ .12-1

Configuration Support for Migrators

Edition 12/01

Contents

Configuration Support for Migrators

Edition 12/01

Converting ProTool Projects

Easy Conversion using ProTool

Using the ProTool conversion function, you can convert projects for graphical

displays (OP 25, OP 27, OP 35, OP 37, TP 27-6", TP 27-10", TP 37 and C7-626)

to projects for Windows-based systems without a lot of effort. Since most part of

the conversion is done completely automatic, migrating from a graphical display to

a new Windows-based system is not complicated.

In this documentation, you will find:

Ø Step-by-Step conversion instructions

A precise reference how the functionality of the old project is mapped to

the new project

Alternative routes in cases where a 1:1 mapping of the projects is not

possible

Note

Information on converting projects from one Windows-based system to another

Windows-based system can be found in the "ProTool Online Help for Windows-

based Systems".

Configuration Support for Migrators

Edition 12/01

1-1

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: