BaBox820_e.pdf
(
919 KB
)
Pobierz
SIMATIC
Box PC 820
PC FI45 V2
Operating Instructions
A5E00051535-04
Safety Guidelines
This product information bulletin contains notices which you should observe to ensure your own personal
safety, as well as to protect the product and connected equipment. These notices are highlighted in the
manual by a warning triangle and are marked as follows according to the level of danger:
Warning
indicates that death, severe personal injury or substantial property damage can result if proper precautions
are not taken.
!
Caution
indicates that minor personal injury or property damage can result if proper precautions are not taken.
!
Note
draws your attention to particularly important information on the product, handling the product, or to a
particular part of the documentation.
Correct Usage
Please observe the following
Note
You can set up and operate your device in conjunction with the following instructions.
Only
qualified personnel
should be allowed to install and work on this equipment. Qualified persons are
defined as persons who are authorized to commission, to ground, and to tag equipment, systems, and
circuits in accordance with established safety practices and standards.
Warning
!
This device may only be used for the applications described in the catalog or technical description, and
only in connection with devices or components from other manufacturers which have been
approved or recommended by Siemens.
This product can only function correctly and safely if it is transported, stored and set up carefully and
correctly, and operated and maintained as recommended.
Trademarks
SIMATIC , SIMATIC NET and SIMATIC HMI are registered trademarks of Siemens AG.
Copyright
Siemens AG 2000 All Rights Reserved
Disclaimer of Liability
The reproduction, transmission or use of this document or its contents is
not permitted without express written authority.
Offenders will be liable for damages. All rights, including rights created by
patent grant or registration of a utility model or design, are reserved.
We have checked the contents of this manual for agreement with the
hardware and software described. Since deviations cannot be precluded
entirely, we cannot guarantee full agreement. However, the data in this
manual are reviewed regularly and any necessary corrections included in
subsequent editions. Suggestions for improvement are welcomed.
Siemens AG
Bereich Automatisierungs und Antriebstechnik
Geschaeftsgebiet Industrie Automatisierungssysteme
Postfach 4848, D90327 Nuernberg
Technical data subject to change.
A5E00051535
Printed in the Fed. Rep. of Germany
Siemens Aktiengesellschaft
Contents
Welcome to your SIMATIC PC
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
v
Overview
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
v
Information about this manual
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
viii
Conventions
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
viii
1
Important Notes
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-1
1.1
General Notes
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-1
1.2
Notes on the CE Symbol
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-5
1.3
Approvals for the USA, Canada and Australia
. . . . . . . . . . . . . . . . . . . . . . .
1-6
2
Unpacking and Installing
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-1
2.1
Device Models
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-2
2.2
Installing and Transporting
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-4
2.3
Hardware Components
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-5
2.4
Installation
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-8
2.5
Drives
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-12
3
Setting Up and Operating
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-1
3.1
Connecting the SIMATIC PC to the Power Supply
. . . . . . . . . . . . . . . . . . .
3-2
3.2
Connecting I/O Devices
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-4
3.3
Operating Elements and Displays
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-9
3.3.1
Input Fields on the FI45
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-10
3.3.2
Floppy Disk Drive
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-14
3.3.3
Reset Key
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-14
3.3.4
CD-ROM Drive
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-15
3.3.5
Display
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-16
3.3.6
LEDs
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-17
3.4
Starting Up Your PC for the First Time
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-18
3.5
Setting Up Your PC
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-18
3.6
Electronic Manual
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-19
3.7
Protective Functions
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-20
Operating Instructions Box PC 820 / PC FI45 V2
A5E00051535-04
iii
Contents
4
Expanding
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-1
4.1
Opening the Unit
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-2
4.2
Installing Memory Expansion Cards
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-4
4.3
Changing the Backup Battery
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-6
4.4
Closing the Unit
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-7
4.5
Options
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-7
4.6
Reinstallation of Software
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-8
4.6.1
Installation from the Recovery CD for Microsoft Windows NT
. . . . . . . . . .
4-8
4.6.2
Installation of the operating system MS-DOS 6.22
. . . . . . . . . . . . . . . . . . .
4-9
4.6.3
Installation from the Recovery CD for Microsoft Windows 98
. . . . . . . . . .
4-9
4.6.4
Installation from the Recovery CD for Microsoft Windows 2000
. . . . . . . .
4-11
4.6.5
Setting the Language Selection for Windows 2000
. . . . . . . . . . . . . . . . . . .
4-12
4.6.6
Installation of Drivers and Software
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-12
4.7
Direct Key Module
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-12
4.8
Touch Screen Display
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-12
5
Technical Specifications
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-1
5.1
Technical Specifications
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-2
6
Error Diagnostics
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-1
6.1
The PC Does not React
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-2
6.2
Problems When Using Modules from Other Manufacturers
. . . . . . . . . . . .
6-2
6.3
The Monitor Remains Dark
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-3
6.4
The Screen Display Does not Appear or Drifts
. . . . . . . . . . . . . . . . . . . . . . .
6-4
6.5
No Mouse Pointer Appears on the Screen
. . . . . . . . . . . . . . . . . . . . . . . . . .
6-4
6.6
The Clock Time and/or the Date in Your PC Is Incorrect
. . . . . . . . . . . . . .
6-5
6.7
Rebooting Your Hard Drive (Data Deleted)
. . . . . . . . . . . . . . . . . . . . . . . . . .
6-5
6.8
USB-Device doesn’t function
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-5
6.9
An Error Message Appears on the Screen
. . . . . . . . . . . . . . . . . . . . . . . . . .
6-6
6.10
Self-Test Prior to Booting
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-7
7
Hotline Services
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7-1
7.1
Customer Support, Technical Support
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7-1
7.2
SIMATIC Customer Support Online Services
. . . . . . . . . . . . . . . . . . . . . . . .
7-2
7.3
Regional Repair Centers
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7-3
Operating Instructions Box PC 820 / PC FI45 V2
A5E00051535-04
iv
Welcome to your SIMATIC PC
Overview
Your device is a high performance industrial PC which is at home under the toughest
conditions. It is shock resistant and functions in damp, dusty environments.
The Box PC 820 is intended to be installed in switchgear cabinets, switchboxes,
control consoles or directly in the machines.
The PC FI45 V2 has a 19” housing with a flat display screen and membrane keyboard
which make it especially suitable for installation where space is limited.
Uses
Its high system performance and good expansion capabilities allow use in all areas of
industrial production, especially for the demanding requirements of function and
operation monitoring and securing.
With its integrated PROFIBUS-DP/MPI interface, the SIMATIC PC is ideal for all
applications with process interfacing via decentralized I/O or with interfacing to other
SIMATIC automation devices.
Typical usage areas are the acquisition, processing and archiving of process and
machine data, visualizing material flow and production processes and in process
instrumentation and control.
Features
Key features are:
Hard disk drives installed on vibration resistant mountings
Hard disk drives designed for non-stop operation
Monitoring of internal housing and processor temperature.
Monitoring of programs (Watchdog)
2 PCI-slots, 1 shared ISA/PCI-slot, 2 ISA-Slots
High brightness, 13.3” TFT high-contrast display and large viewing angle
(FI 45 V2)
Operating Instructions Box PC 820 / PC FI45 V2
A5E00051535-04
v
Plik z chomika:
masterkom
Inne pliki z tego folderu:
ET200iS_e.pdf
(22821 KB)
DOC_AS_PL_S7300_HW_moduly.pdf
(7881 KB)
DPPA_E.PDF
(4575 KB)
dyn_funktion_e.pdf
(4571 KB)
Cpu210_e.pdf
(1429 KB)
Inne foldery tego chomika:
Autoryzacja
Kable
Logo
OP Panels
S5
Zgłoś jeśli
naruszono regulamin