IntroWirelessLAN_e.pdf
(
808 KB
)
Pobierz
SIMATIC NET
Industrial Wireless LAN
Basics
2001
·
Release 11/2001
C79000-G8976-C168-01
Classification of Safety-Related Notices
This document contains notices which you should observe to ensure your own personal
safety, as well as to protect the product and connected equipment. These notices are
highlighted in the manual by a warning triangle and are marked as follows according to
the level of danger:
Danger
indicates that death or severe personal injury
will
result if proper precautions are not
taken.
!
Warning
indicates that death or severe personal injury
can
result if proper precautions are not
taken.
!
Caution
with a warning triangle indicates that minor personal injury can result if proper
precautions are not taken.
!
Caution
without a warning triangle indicates that damage to property can result if proper
precautions are not taken.
Notice
indicates that an undesirable result or status can occur if the relevant notice is
ignored.
Note
highlights important information on the product, using the product, or part of the
documentation that is of particular importance and that will be of benefit to the user.
Copyright Siemens AG, 2001 All rights reserved
The reproduction, transmission or use of this document or its contents
is not permitted without express written authority. Offenders will be
liable for damages. All rights, including rights created by patent grant or
registration of a utility model or design, are reserved.
Disclaimer
We have checked the contents of this manual for agreement with the
hardware and software described. Since deviations cannot be
precluded entirely, we cannot guarantee full agreement. However, the
data in this manual are reviewed regularly and any necessary
corrections included in subsequent editions. Suggestions for
improvement are welcomed.
Siemens AG
Bereich Automatisierungs- und Antriebstechnik
Geschaeftsgebiet Industrie-Automatisierungssysteme
Postfach 48 48, D-90327 Nuernberg
C79000-G8976-C168-01
© Siemens AG 2001
Technical data subject to change.
SIMATIC NET Industrial Wireless LAN
Basics
November 2001
Trademarks
SIMATIC
â
, SIMATIC NET
â
, and SIMATIC NET Networking for Industry
®
are registered
trademarks of Siemens AG.
Third parties using for their own purposes any other names in this document which refer
to trademarks might infringe upon the rights of the trademark owners.
Safety Instructions Regarding your Product
Before you use the product described here, read the safety instructions below thoroughly.
Qualified Personnel
Only qualified personnel should be allowed to install and work on this equipment .
Qualified persons are defined as persons who are authorized to commission, to ground,
and to tag circuits, equipment, and systems in accordance with established safety
practices and standards.
Correct Usage of Hardware Products
Please note the following regarding the correct usage of hardware products:
Caution
This device may only be used for the applications described in the catalog or the
technical description, and only in connection with devices or components from other
manufacturers which have been approved or recommended by Siemens.
This product can only function correctly and safely if it is transported, stored, set up,
and installed correctly, and operated and maintained as recommended.
Before you use the supplied sample programs or programs you have written yourself,
make certain that no injury to persons nor damage to equipment can result in your
plant or process.
EU Directive: Do not start up until you have established that the machine on which
you intend to run this component complies with the directive 89/392/EEC.
Copyright © Siemens AG 2001
All Rights reserved
Excellence in
Automation & Drives:
Siemens
Page 3 of 60
SIMATIC NET Industrial Wireless LAN
Basics
November 2001
Correct Usage of Software Products
Please note the following regarding the correct usage of software products:
Caution
This software may only be used for the applications described in the catalog or the
technical description, and only in connection with software products, devices, or
components from other manufacturers which have been approved or recommended
by Siemens.
Before you use the supplied sample programs or programs you have written yourself,
make certain that no injury to persons nor damage to equipment can result in your
plant or process.
Prior to Startup
Before putting the product into operation, note the following warning:
Caution
Prior to startup you must observe the instructions in the relevant documentation. For
ordering data of the documentation please refer to the catalogs or contact your local
SIEMENS representative.
Copyright © Siemens AG 2001
All Rights reserved
Excellence in
Automation & Drives:
Siemens
Page 4 of 60
Objectives:
The purpose of this manual is to
Ø
provide information on the subject of wireless LAN technology in automation and
to discuss development trends in wireless LAN technology.
In addition to purely technical aspects and costs, the main factors which contribute to
the decision to install a wireless LAN are:
Ø
Ease of use (Plug & Play)
Ø
Taking advantage of existing synergies
Ø
Potential for process improvement
Ø
Future developments in wireless technology
Ø
Utilization of existing know-how
This symbol highlights references to SIMATIC NET products or
special SIMATIC NET solutions
Published by
SIEMENS AG
Bereich: Automatisierungs- und Antriebstechnik
Geschäftszweig: Industrielle Kommunikation SIMATIC NET
Postfach 4848
90327 Nürnberg
Further Support
If you have additional questions, please contact your local Siemens representative.
You will also find SIMATIC NET on the Internet at
http://www.siemens.com/simatic net
Plik z chomika:
masterkom
Inne pliki z tego folderu:
ET200iS_e.pdf
(22821 KB)
DOC_AS_PL_S7300_HW_moduly.pdf
(7881 KB)
DPPA_E.PDF
(4575 KB)
dyn_funktion_e.pdf
(4571 KB)
Cpu210_e.pdf
(1429 KB)
Inne foldery tego chomika:
Autoryzacja
Kable
Logo
OP Panels
S5
Zgłoś jeśli
naruszono regulamin