HiGrav5_e.pdf

Important Information,

Contents

Product Overview and

Installation

Designing a Program Using

the Example of a Drill

Working with S7-HiGraph

SIMATIC

Process Error Diagnosis

S7-HiGraph for S7-300/400

STL Instruction Description

Configuration Notes

User Program Run Behavior

in the PLC

Manual

Tips and Tricks

Glossary

Index

01/2000

C79000-G7076-C527

Edition 01

Safety Guidelines

This manual contains notices which you should observe to ensure your own personal safety, as well as to

protect the product and connected equipment. These notices are highlighted in the manual by a warning triangle

and are marked as follows according to the level of danger:

Danger

indicates that death, severe personal injury or substantial property damage will result if proper precautions are

not taken.

Warning

indicates that death, severe personal injury or substantial property damage can result if proper precautions are

not taken.

Caution!

indicates that minor personal injury or property damage can result if proper precautions are not taken.

Note

draws your attention to particularly important information on the product, handling the product, or to a particular

part of the documentation.

Qualified Personnel

Only qualified personnel should be allowed to install and work on this equipment Qualified persons are defined

as persons who are authorized to commission, to ground, and to tag circuits, equipment, and systems in

accordance with established safety practices and standards.

Correct Usage

Please note the following:

Warning

This device and its components may only be used for the applications described in the catalog or the technical

description, and only in connection with devices or components from other manufacturers which have been

approved or recommended by Siemens.

This product can only function correctly and safely if it is transported, stored, set up, and installed correctly, and

operated and maintained as recommended.

Trademarks

SIMATIC®, SIMATIC HMI® and SIMATIC NET® are trademarks of Siemens AG.

Third parties using for their own purposes any other names in this document which refer to trademarks might

infringe upon the rights of the trademark owners.

The reproduction, transmission or use of this document or its contents is

not permitted without express written authority. Offenders will be liable

for damages. All rights, including rights created by patent grant or

registration of a utility model or design, are reserved.

Disclaimer of Liability

We have checked the contents of this manual for agreement with the

hardware and software described. Since deviations cannot be

precluded entirely, we cannot guarantee full agreement. However, the

data in this manual are reviewed regularly and any necessary

corrections included in subsequent editions. Suggestions for

improvement are welcomed.

Siemens AG

Bereich Automatisierungs- und Antriebstechnik

Geschaeftsgebiet Industrie-Automatisierungsysteme

Postfach 4848, D- 90327 Nuernberg

Technical data subject to change.

C79000-G7076-C527

Siemens Aktiengesellschaft

Important Information

Purpose of the manual

This manual is intended for programmers of HiGraph programs and for persons

working in the fields of planning, commissioning and servicing PLCs.

If you are using HiGraph for the first time, we recommend that you familiarize

yourself on the basis of the example in Chapter 2. It is an easy method of getting

started in programming with HiGraph.

Required knowledge

A general knowledge of automation technology is required in order to understand

the manual.

In addition, knowledge of S7 programs is required. This can be looked up in the

programming manual. Since HiGraph is based on the STEP 7 basic software, you

should also know how to handle the basic software, as described in the STEP 7

User Manual.

Validity of the manual

The manual is valid for the S7-HiGraph programming software, Version 5.0.

S7-HiGraph for S7-300/400

C79000-G7076-C527-01

iii

Important Information

Online help

In addition to the manual detailed support in using the software is provided by the

online help integrated in the software.

The help system is integrated in the software through several interfaces:

· The Help menu contains several menu commands: Contents opens the table

of contents of the help, Introduction provides an overview over HiGraph

programming, Using Help provides detailed instructions on using the online

help.

· The context-sensitive help provides information on the current context, for

example on an opened dialog box or on active window. It can be used by

clicking on the "Help" command button or by pressing F1 .

· The status line provides a further form of context-sensitive help. A brief

explanation of the respective menu command is displayed as soon as the

cursor is positioned on the menu command.

· A brief explanation is also displayed for the icons in the toolbar as well as for

the graphics elements in the state diagrams when the cursor is left briefly on

the element.

If you would rather have the information of the online help in printed form, you can

also print out individual help topics, books or the entire help.

User response to the documentation

We would appreciate your help in optimizing the documentation for you and future

HiGraph users. Should you have any questions or remarks on this manual or on

the online help, please fill out the questionnaire at the end of the manual and send

it to the address specified there. Please also enter your personal evaluation there.

Reference to literature /.../

References to further documentation are made by means of literature numbers

between slashes, for example /.../. You can use these numbers to ascertain the

exact title of the documentation in the literature list at the end of the manual.

SIMATIC Training Center

We offer corresponding courses to help familiarize you with the SIMATIC S7 PLC.

Please contact your regional training center or the central training center in

D 90327 Nuremberg, Germany. Tel. +49 (911) 895 3154.

S7-HiGraph for S7-300/400

C79000-G7076-C527-01

Important Information

SIMATIC Customer Support Hotline

Available worldwide at all times:

Nuremberg

Johnson City

Singapur

SIMATIC Hotline

Nuremberg

SIMATIC BASIC Hotline

Johnson City

SIMATIC BASIC Hotline

Singapore

SIMATIC BASIC Hotline

Local time:

Mo.-Fr. 7:00 to 17:00

Local time:

Mo.-Fr. 7:00 to 17:00

Local time:

Mo.-Fr. 8:30 to 17:30

Telephone:

+49 (911) 895-7000

Telephone:

+1 423 461-2522

Telephone:

+65 740-7000

Fax:

+49 (911) 895-7002

Fax:

+1 423 461-2231

Fax:

+65 740-7001

E-mail:

simatic.support@

Nbgm.siemens.de

E-mail:

simatic.hotline@

sea.siemens.com

E-mail:

simatic.hotline@

sae.siemens.com.sg

GMT:

+1:00

GMT:

-5:00

GMT:

+8:00

Nuremberg

SIMATIC Authorization Hotline

Nuremberg

SIMATIC Premium Hotline

Local time:

Mo.-Fr. 7:00 to 17:00

(Calls charged, only with

SIMATIC Card)

Time: Mo.-Fr. 0:00 to 24:00

Telephone:

+49 (911) 895-7000

Fax:

+49 (911) 895-7201

+49 (911) 895-7777

E-mail:

authorization@

Nbgm.siemens.de

Fax:

+49 (911) 895-7001

GMT:

+1:00

GMT:

+01:00

S7-HiGraph for S7-300/400

C79000-G7076-C527-01

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: