HB_PDM_e.pdf
(
585 KB
)
Pobierz
20.04.2001
Preface,
Contents
1
Introducing the Product
SIMATIC
Configuring Networks and
Process Devices
2
3
Working with SIMATIC PDM
PDM V5.1
The Process Device Manager
Loading of Data Between
Various Devices
4
5
Routing
Manual
6
Diagnostics
7
Utilities
Index
Edition 04/2001
A5E00084235-01
20.04.2001
Safety Guidelines
This manual contains notices intended to ensure personal safety, as well as to protect the
products and connected equipment against damage. These notices are highlighted by the
symbols shown below and graded according to severity by the following texts:
!
Danger
indicates that death, severe personal injury or substantial property damage will result if proper
precautions are not taken.
!
Warning
indicates that death, severe personal injury or substantial property damage can result if proper
precautions are not taken.
!
Caution
indicates that minor personal injury can result if proper precautions are not taken.
Note
draws your attention to particularly important information on the product, handling the product, or
to a particular part of the documentation.
Qualified Personnel
Only
qualified personnel
should be allowed to install and work on this equipment. Qualified
persons are defined as persons who are authorized to commission, to ground and to tag circuits,
equipment, and systems in accordance with established safety practices and standards.
Correct Usage
Note the following:
!
Warning
This device and its components may only be used for the applications described in the catalog
or the technical description, and only in connection with devices or components from other
manufacturers which have been approved or recommended by Siemens.
This product can only function correctly and safely if it is transported, stored, set up, and
installed correctly, and operated and maintained as recommended.
Trademarks
SIMATIC®, SIMATIC HMI® and SIMATIC NET® are registered trademarks of SIEMENS AG.
Third parties using for their own purposes any other names in this document which refer to
trademarks might infringe upon the rights of the trademark owners.
Copyright © Siemens AG 2001 All rights reserved
The reproduction, transmission or use of this
document or its contents is not permitted without
express written authority. Offenders will be liable for
damages. All rights, including rights created by patent
grant or registration of a utility model or design, are
reserved.
Disclaimer of Liability
We have checked the contents of this manual for agreement
with the hardware and software described. Since deviations
cannot be precluded entirely, we cannot guarantee full
agreement. However, the data in this manual are reviewed
regularly and any necessary corrections included in subsequent
editions. Suggestions for improvement are welcomed.
Siemens AG
Bereich Automatisierungs- und Antriebstechnik
Geschaeftsgebiet Industrie-Automatisierungsysteme
Postfach 4848, D- 90327
Nuernberg
© Siemens AG 2001
Technical data subject to change.
Siemens Aktiengesellschaft
A5E00084235
20.04.2001
Preface
Purpose
This manual provides a complete overview of programming with
SIMATIC PDM
. It is designed
to support you when installing and commissioning the software. It explains the procedure for
configuring networks and process devices as well as the commissioning and run-time
functions
.
The manual is intended for persons who are involved in the configuration, commissioning and
operation of the plant in the field of field control technology.
Basic Knowledge Required
In order to understand this manual, general knowledge of field control technology is required.
In addition, you must be familiar with using PCs with Windows operating systems.
If used with STEP 7 and PCS 7, a corresponding knowledge in the field of automation
technology and SIMATIC S7 are required.
Scope of the Manual
This manual is valid for release 5.1 of the SIMATIC PDM programming software package.
The Process Device Manager
A5E00084235-01
iii
20.04.2001
Preface
Online Help
The manual is complemented by an online help that is integrated in the software. This online
help is intended to provide you with detailed support when using the software.
The help system is integrated in the software via a number of interfaces:
·
There are several menu commands that you can select in the
Help
menu: The
Contents
command opens the index for the Help on SIMATIC PDM.
·
The context-sensitive help offers information on the current context, for example, an open
dialog box or an active window. You can open the context-sensitive help by clicking the
"Help" button or by pressing
F1
.
·
The status bar offers another form of context-sensitive help. It displays a short explanation
for each menu command when the mouse pointer is positioned on the menu command.
·
A brief explanation is also displayed for each icon in the toolbar when the mouse pointer
is positioned on the icon for a short time.
If you prefer to read the information from the online help in printed format, you can print out
individual help topics, books, or the entire online help.
This manual is an extract from the HTML-based Help on SIMATIC PDM. For detailed
procedures please refer to the SIMATIC PDM help. As the manual and the online help share
an almost identical structure, it is easy to switch between the manual and the online help.
Getting Started
The Getting Started "First Steps with SIMATIC PDM" contains the project "PDM_1", which
makes it possible for you to create your own fully-functional project.
You can find the Getting Started "First Steps with SIMATIC PDM" on the CD "SIMATIC PDM
V 5.1" in the folder "Docu" as the file "PDM Getting Started.pdf".
The Process Device Manager
iv
A5E00084235-01
20.04.2001
Preface
Automation and Drives, Service & Support
Available worldwide, around the clock:
Nuremberg
Johnson City
Singapur
SIMATIC Hotline
Worldwide
(Nuremberg)
Technical Support
Worldwide
(Nuremberg)
Technical Support
(fee based, only with
SIMATIC Card)
Local time: Mo.-Fr. 0:00 to 24:00
Phone:
(FreeContact)
Local time:
Mo.-Fr. 7:00 to 17:00
+49 (911) 895-7777
Phone:
+49 (180) 5050 222
Fax:
+49 (911) 895-7001
Fax:
+49 (180) 5050 223
GMT:
+01:00
E-mail:
techsupport@
ad.siemens.de
GMT:
+1:00
Europe / Africa
(Nuremberg)
Authorization
America
(Johnson City)
Technical Support and
Authorization
Asia / Australia
(Singapore)
Technical Support and
Authorization
Local time: Mo.-Fr. 8:00 to 19:00
Phone:
Local time:
Local time: Mo.-Fr. 8:30 to 17:30
Phone: +65 740-7000
Fax: +65 740-7001
E-mail: simatic.hotline@
sae.siemens.com.sg
GMT: +8:00
The languages of the SIMATIC Hotlines are generally German and English, in addition, French, Italian
and Spanish are spoken on the authorization hotline.
Mo.-Fr. 7:00 to 17:00
+1 423 461-2522
Phone:
+49 (911) 895-7200
Fax:
+1 423 461-2289
Fax:
+49 (911) 895-7201
E-mail:
simatic.hotline@
sea.siemens.com
E-mail:
authorization@
nbgm.siemens.de
GMT:
+1:00
GMT:
-5:00
The Process Device Manager
A5E00084235-01
v
Plik z chomika:
masterkom
Inne pliki z tego folderu:
ET200iS_e.pdf
(22821 KB)
DOC_AS_PL_S7300_HW_moduly.pdf
(7881 KB)
DPPA_E.PDF
(4575 KB)
dyn_funktion_e.pdf
(4571 KB)
Cpu210_e.pdf
(1429 KB)
Inne foldery tego chomika:
Autoryzacja
Kable
Logo
OP Panels
S5
Zgłoś jeśli
naruszono regulamin