Text Display.pdf

Preface, Contents

Product Overview

Installing Your TD Device

SIMATIC

Using the Keypad Designer to

Create a Custom Faceplate for

Your TD 200C

Using the TD 200 Wizard to

Configure the S7-200 CPU for

Your TD Device

Text Display (TD)

User Manual

Operating Your TD Device

Appendices

Technical Specifications and

Reference Information

Connecting Multiple Devices on a

Network

Troubleshooting

Index

Edition: 06/2004

Safety Guidelines

This manual contains notices which you should observe to ensure your own personal safety, as

well as to protect the product and connected equipment. These notices are highlighted in the

manual by a warning triangle and are marked as follows according to the level of danger:

Danger

Danger indicates an imminently hazardous situation which, if not avoided, will result in death or

serious injury.

Warning

Warning indicates a potentially hazardous situation which, if not avoided, could result in death or

serious injury.

Caution

Caution used with the safety alert symbol indicates a potentially hazardous situation which, if not

avoided, may result in minor or moderate injury.

Caution

Caution used without the safety alert symbol indicates a potentially hazardous situation which, if

not avoided, may result in property damage.

Notice

Notice indicates a potential situation which, if not avoided, may result in an undesirable result or

state.

Qualified Personnel

Only qualified personnel should be allowed to install and work on this equipment. Qualified per-

sons are defined as persons who are authorized to commission, to ground, and to tag circuits,

equipment, and systems in accordance with established safety practices and standards.

Correct Usage

Note the following:

Warning

This device and its components may only be used for the applications described in the catalog

or the technical descriptions, and only in connection with devices or components from other

manufacturers which have been approved or recommended by Siemens.

This product can only function correctly and safely if it is transported, stored, set up, and

installed correctly, and operated and maintained as recommended.

Trademarks

SIMATIC R , SIMATIC HMI R and SIMATIC NET R are registered trademarks of SIEMENS AG.

Some of other designations used in these documents are also registered trademarks; the owner’s rights may be

violated if they are used by third parties for their own purposes.

The reproduction, transmission or use of this document or its contents is not

permitted without express written authority. Offenders will be liable for damages.

All rights, including rights created by patent grant or registration of a utility model

or design, are reserved.

Disclaimer of Liability

We have checked the contents of this manual for agreement with the hardware and

software described. Since deviations cannot be precluded entirely, we cannot gua-

rantee full agreement. However, the data in this manual are reviewed regularly and

any necessary corrections included in subsequent editions. Suggestions for impro-

vement are welcomed.

Siemens AG

Bereich Automation and Drives

Geschaeftsgebiet Industrial Automation Systems

Postfach 4848, D- 90327 Nuernberg

E Siemens AG 2004

Technical data subject to change.

Siemens Aktiengesellschaft

Preface

Purpose of the manual

The SIMATIC Text Display (TD) User Manual is a combination user and reference manual that

describes the operation of the TD devices (TD 200 and TD 200C) with an S7-200 CPU.

Required Basic Knowledge

This manual is designed for engineers, programmers, and maintenance personnel who have a

general knowledge of programmable logic controllers and operator interfaces.

Scope of This Manual

This manual describes the installation, configuration and operation of both the TD 200 version 3.0

and the TD 200C version 1.0. This manual also describes the TD 200 wizard of

STEP 7--Micro/WIN (used to configure the S7-200 CPU for either TD device) and the Keypad

Designer application (used to configure the keypad of the TD 200C).

To utilize the new features of these TD devices, you must use STEP 7--Micro/WIN version 4.0 or

greater.

Agency Approvals

These SIMATIC TD devices meet the standards and regulations of the following agencies.

- Underwriters Laboratories, Inc.(UL): UL 60950

- Canadian Standards Association: CSA C22.2 No. 60950 standard

Refer to Appendix A for additional compliance information.

Certification

These SIMATIC TD devices have the following certification:

- Underwriters Laboratories (UL) Standards UL 60950 and CSA C22.2 No. 60950

- Factory Mutual Research: Standard Class Number 3611, Class I, Division 2, Group A, B, C,

D, and Class I, Zone 2, Group IIC.

Temperature class T5 is adhered to when the ambient temperature during operation does

not exceed 60 ° C.

CE Labeling

These SIMATIC TD devices fulfill the requirements and protection guidelines of the following EU

directives:

- EC Directive 73/23/EEC “Low--voltage directive”

- EC Directive 89/336/EEC “EMC directive”

C-Tick

These TD devices are compliant with requirements of the AS/NZS 3548 (Australian) standard.

Recycling and Disposal

Please contact a company certified in the disposal of electronic scrap for environmentally safe

recycling and disposal of your device.

iii

SIMATIC Text Display (TD) User Manual

How to Use This Manual

If this is your first experience using an operator interface, read the entire manual. If you are an

experienced user, refer to the Table of Contents or Index to find specific information.

Location of this Document in the Information Environment

Product

Family

Documentation

Order Number

S7-200

SIMATIC Text Display (TD) User Manual

Not applicable

S7-200 Programmable Controller System Manual

6ES7 298--8FA24--8BH0

Finding Your Way

If you are a first-time (novice) user of TD devices, you should read the entire SIMATIC Text

Display (TD) User Manual . If you are an experienced user, refer to the table of contents or index to

find specific information.

The SIMATIC Text Display User Manual is organized according to the following topics:

- Chapter 1 (Product Overview) provides an overview of the TD devices: TD 200 and

TD 200C.

- Chapter 2 (Installing Your TD Device) provides provides installation instructions and

guidelines.

- Chapter 3 (Using the Keypad Designer to Create a Custom Faceplate for the TD 200C)

provides information about the Keypad Designer and the steps required for configuring the

keypad and faceplate for the TD 200C.

- Chapter 4 (Using the TD 200 Wizard to Configure the S7-200 CPU for the TD Device)

provides information about using the TD 200 wizard of STEP 7--Micro/WIN to configure the

S7-200 CPU for either the TD 200 or the TD 200C.

- Chapter 5 (Operating Your TD Device) provides information about the basic operation of the

TD devices and also describes new features and capabilities, such as user screens.

- Appendix A (Technical Specifications and Reference Information) provides the technical

information for the TD devices and also provides references for the character sets

supported.

Appendix B (Connecting Multiple Devices on a Network) provides information about using a

TD device in a network with other TD devices and S7-200 CPUs.

Appendix C (Troubleshooting) provides information to help you diagnose problems with the

TD device.

Preface

Additional Support

Local Siemens Sales Office or Distributor

For assistance in answering any technical questions, for training on the S7-200 products, or for

ordering S7-200 products, contact your Siemens distributor or sales office. Because your sales

representatives are technically trained and have the most specific knowledge about your

operations, process and industry, as well as about the individual Siemens products that you are

using, they can provide the fastest and most efficient answers to any problems that you might

encounter.

Service & Support on the Internet

In addition to our documentation, we offer our Know-How online on the internet at:

http://www.siemens.com/automation/service&support

where you will find the following:

- Access the S7-200 Internet site to find additional S7-200 product information:

www.siemens.com/S7--200

This site includes frequently asked questions (FAQs), Programming Tips (application

examples and sample programs), information about newly released products, and product

updates or downloads

- Read the newsletter, which constantly provides you with up-to-date information on your

products

- Use the Search feature of the Service & Support area to find specific documentation

- Share information and exchange experiences with a forum of other users and experts from

all over the world

- Find your local Siemens representative for Automation & Drives

- Use the “Services” link to find information on field service, repairs, spare parts and more

Technical Services

The highly trained staff of the S7-200 Technical Services center is also available to help you solve

any problems that you might encounter. You can call on them 24 hours a day, 7 days a week.

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: