W451-E1-03_CP1_-CPU_ProgManual.pdf

(13649 KB) Pobierz
W451-E1-03.book
Cat. No. W451-E1-03
SYSMAC CP Series
CP1H-X40D @ - @ , CP1H-XA40D @ - @ ,
CP1H-Y20DT-D
CP1L-L14D @ - @ , CP1L-L20D @ - @ ,
CP1L-M30D @ - @ , CP1L-M40D @ - @
CP1H/CP1L CPU Unit
PROGRAMMING MANUAL
43294628.010.png 43294628.011.png 43294628.012.png
SYSMAC CP Series
CP1H-X40D @ - @ , CP1H-XA40D @ - @ ,
CP1H-Y20 DT-D
CP1H CPU Units
CP1L-L14D @ - @ , CP1L-L20D @ - @ ,
CP1L-M30D @ - @ , CP1L-M40 D@ - @
CP1L CPU Units
Programming Manual
Revised May 2007
iv
Notice:
OMRON products are manufactured for use according to proper procedures
by a qualified operator and only for the purposes described in this manual.
The following conventions are used to indicate and classify precautions in this
manual. Always heed the information provided with them. Failure to heed pre-
cautions can result in injury to people or damage to property.
!DANGER Indicates an imminently hazardous situation which, if not avoided, will result in death or
serious injury. Additionally, there may be severe property damage.
!WARNING
Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury. Additionally, there may be severe property damage.
!Caution
Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury, or property damage.
OMRON Product References
All OMRON products are capitalized in this manual. The word “Unit” is also
capitalized when it refers to an OMRON product, regardless of whether or not
it appears in the proper name of the product.
The abbreviation “Ch,” which appears in some displays and on some OMRON
products, often means “word” and is abbreviated “Wd” in documentation in
this sense.
The abbreviation “PLC” means Programmable Controller. “PC” is used, how-
ever, in some CX-Programmer displays to mean Programmable Controller.
Visual Aids
The following headings appear in the left column of the manual to help you
locate different types of information.
Note Indicates information of particular interest for efficient and convenient opera-
tion of the product.
1,2,3...
1. Indicates lists of one sort or another, such as procedures, checklists, etc.
OMRON, 2005
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, or
by any means, mechanical, electronic, photocopying, recording, or otherwise, without the prior written permission of
OMRON.
No patent liability is assumed with respect to the use of the information contained herein. Moreover, because OMRON is con-
stantly striving to improve its high-quality products, the information contained in this manual is subject to change without
notice. Every precaution has been taken in the preparation of this manual. Nevertheless, OMRON assumes no responsibility
for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained in
this publication.
v
Unit Versions of CP-series CPU Units
Unit Versions
A “unit version” has been introduced to manage CPU Units in the CP Series
according to differences in functionality accompanying Unit upgrades.
Notation of Unit Versions
on Products
The unit version is given to the right of the lot number on the nameplate of the
products for which unit versions are being managed, as shown below.
CP-series CPU Unit
Product nameplate
CP1H-XA40DR-A
CPU UNIT
Lot No. 28705 0000 Ver.1.0
OMRON Corporation MADE IN JAPAN
Lot No.
Unit version
(Example for Unit version 1.0)
Confirming Unit Versions
with Support Software
The methods used to confirm the unit version for the CP-series CP1H and
CP1L CPU Units are somewhat different.
CP1H CPU Units
CX-Programmer version 6.1 or higher can be used to confirm the unit version
using one of the following two methods. (See note.)
Using the PLC Information
• Using the Unit Manufacturing Information
Note CX-Programmer versions lower than version 6.1 cannot be used to confirm
unit versions for CP1L CPU Units.
CP1L CPU Units
CX-Programmer version 7.1 or higher can be used to confirm the unit version
using the PLC Information . (See note.) The Unit Manufacturing Informa-
tion cannot be used.
Note CX-Programmer versions lower than version 7.1 cannot be used to confirm
unit versions for CP1L CPU Units.
vi
43294628.013.png 43294628.001.png 43294628.002.png 43294628.003.png 43294628.004.png 43294628.005.png 43294628.006.png 43294628.007.png 43294628.008.png 43294628.009.png
Zgłoś jeśli naruszono regulamin