A3 2003 diesel YES.pdf

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

MAKE

AUDI

MOD.

A3*

YEAR 03 ﬁ

PETROL

DIESEL

* Models with original equipment keyless entry system.

ALARM/SIREN

POSITION

Position the compact alarms and the sirens on the support near the locking of the

bonnet.

CENTRAL UNIT

POSITION

Position the modular sistems and the modules under the central tunnel or under the

passenger’s side seat.

POWER SUPPLY

+30: connect directly to the positive pole of the battery.

-31: connect directly to the ground terminal located behind the driver’s side sill cover.

IGNITION WIRE

+15/54: connect to the 2 mm 2 BLACK wire, in the wiring harness coming out of the

fuse box located on the left side of the dashboard.

DIRECTION INDICATORS Ant. and post. direction indicators

Connect to the BLACK/WHITE wire at the position nr. 11 in the 21 way light brown

connector, marked “D”; BLACK/GREEN wire at the position nr.10 in the black

connector marked “B”; BLACK/WHITE wire at the position nr.8 and BLACK/GREEN

wire at the position nr.6, in the 12 way black connector, marked “A”.

To make the connection it is necessary to separate the lines by means of diodes.

ACTIVAT./DEACTIVATION

CONTROLS

Connections antitheft/vehicle

Refer to the fitting diagram nr.187.

IMMOBILISATION POINT Gasoil pump

Cut the 1mm 2 BLUE/BLACK wire, at the position nr.27, behind the fuse box.

STARTER

+50: Cut the 0,35 mm 2 RED/BLACK wire, at the position nr.1, in the 12 way black

connector, marked “G”, in the central located under the driver’s side dashboard.

BONNET SWITCH

Connect to the BROWN/LIGHT BLUE wire, in the wiring harness coming out of the

bonnet lamp.

DOORS SWITCH

Connect to the BROWN/WHITE wire in the wiring harness behind the lateral

bulkhead, driver’s side.

BOOT SWITCH

Connect to the BLACK/RED wire, at the position nr.8, in the wiring harness coming

out of the 17 way light brown connector, in the central located in the rear covering of

the passenger’s side boot.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

aua303gbdt.doc

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

FITTING DIAGRAM NR. 187

Connection 3800 serie antitheft on

AUDI A3 year 2003

ORANGE YELLOW/BLACK VIOLET/WHITE ORANGE/WHITE

VIOLET

switch inside driver’s side

door

1N4004 diode

+30

BLUE/WHITE at position nr.13

in the 20 way connector inside

the driver’s side door

ground

1N5406 diodes

BROWN/BLUE GREY/GREEN

0,75 mm 2 0,75 mm 2

in the taped wiring harness coming out of

the motor, inside the driver’s side door

GREY/BLACK

direction indicator

BLACK/WHITE position nr.11 in

the connector marked “C” under

the driver’s side dashboard

ground

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

aua303gbdt.doc

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: