fe.pdf

(197 KB) Pobierz
191433006 UNPDF
ACCELERATOR CONTROL, FUEL &
EXHAUST SYSTEMS
SECTION FE
FE
CONTENTS
PREPARATION .............................................................. 2
Special Service Tool .................................................. 2
QG16DE, QG18DE, SR20De, CD20T
FUEL SYSTEM .............................................................. 6
Fuel Pump and Gauge .............................................. 7
EXHAUST SYSTEM ...................................................... 9
QG16DE, QG18DE, SR20DE
ACCELERATOR CONTROL SYSTEM ......................... 3
Adjusting Accelerator Cable ...................................... 4
CD20T
ACCELERATOR CONTROL SYSTEM ......................... 5
191433006.027.png 191433006.028.png 191433006.029.png 191433006.030.png 191433006.001.png
PREPARATION
Special Service Tool
Tool number
Tool name
Description
KV999G0010
Fuel tank lock ring socket
Removing and installing fuel tank
lock ring
NT057
FE-2
191433006.002.png
ACCELERATOR
CONTROL SYSTEM
QG16DE, QG18DE, SR20DE
CAUTION:
l
When removing accelerator cable, mark location to indicate lock nut’s initial position.
Check that throttle valve is completely open when accelerator pedal is fully depressed. Check
that throttle valve returns to idle position when accelerator pedal is released.
l
Check accelerator control does not interfere with any adjacent parts.
l
When connecting accelerator cable, be careful not to twist or scratch cable.
l
SEC. 180
2 (LHD models)
p
p
1
1
p
2 (RHD models)
3 - 4 (0.3 - 0.4, 27 - 35)
3 - 4 (0.3 - 0.4, 27 - 35)
p
3
3 - 4 (0.3 - 0.4, 27 - 35)
p
p
: N·m (kg-m, in-lb)
NFE062
p
1
Accelerator cable
p
Pedal bracket
p
Accelerator pedal
p
p
Cable bracket
Return spring
2
4
FE-3
p
4
5
3
5
191433006.003.png 191433006.004.png 191433006.005.png 191433006.006.png 191433006.007.png 191433006.008.png 191433006.009.png 191433006.010.png 191433006.011.png
ACCELERATOR
CONTROL SYSTEM
QG16DE, QG18DE, SR20DE
Throttle drum
Lock nut
8-11N·m
(0.8 - 1.1 kg-m,
71 - 97 in-lb)
Adjusting Accelerator Cable
1. Loosen lock nut, and tighten adjusting nut until throttle drum
starts to move.
2. From that position turn back adjusting nut 1.5 to 2 turns, and
secure lock nut.
Accelerator
Adjusting nut
NFE020
FE-4
191433006.012.png 191433006.013.png 191433006.014.png 191433006.015.png
ACCELERATOR CONTROL SYSTEM
CD20T
SEC. 180
2.9 - 3.9 (0.3 - 0.4, 25.7 - 34.5)
6 - 7 (0.61 - 0.71, 53.1 - 62.0)
p
1
p
2
p
3
p
2.9 - 3.9 (0.30 - 0.40, 25.7 - 34.5)
p
4
: Apply grease
: N·m (kg-m, in-lb)
: Do not re-use
NFE043
p
Pedal bracket
p
Accelerator cable
p
Accelerator pedal
p
p
2
Accelerator position sensor
4
Return spring
l
If MIL illuminates after engine has started, refer to “ON
BOARD DIAGNOSTIC SYSTEM DESCRIPTION” in EC
section for instructions.
FE-5
5
1
3
5
191433006.016.png 191433006.017.png 191433006.018.png 191433006.019.png 191433006.020.png 191433006.021.png 191433006.022.png 191433006.023.png 191433006.024.png 191433006.025.png 191433006.026.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin